Uploaded August 2025 | Updated September 2026, 1 week ago
In this video I will take you in depth into getting started with the XTOOL F2 ULTRA and the RA2 rotary module! I will take you right from the basics to processing more challenging work pieces with a very useful upgrade for the RA2.
Although the RA2 is one of the best rotary modules out there - there are some limitations to what it can do and even more so when working inside of enclosed areas like the xTool F2 ULTRA. Therefore, I designed my tilt mechanism upgrade to overcome these challenges and unlock more possibilities when it comes to rotary engraving inside the F2 ULTRA.
✅ F2 ULTRA Rotary Tilt Kit:
👉 embracemaking.com/products/xtool-f2-ultra-ra2-pro-tilt-mechanism-kit
✅ Back Stop and Bubble Level Holder:
👉 embracemaking.com/products/xtool-ra2-bubble-level-holder-and-backstop-kit
✅ 40oz Full Wrap Bubble Level Tool:
👉 embracemaking.com/products/xtool-ra2-40oz-full-wrap-bubble-level-holder-tool
Since the F2 Ultra does not come with laser safety glasses, I have made safety glasses available that protect your eyes from both blue and infrared laser light. (Perfect for the F2 ULTRA). You can find those glasses here:
👉 embracemaking.com/products/laser-safety-glasses-blue-diode-ir
Haven't purchased your XTOOL F2 ULTRA yet? Links below for the best xTool prices!
✅ XTOOL F2 ULTRA:
👉 xtool.com/products/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=13686
✅ RA2 Module:
👉 xtool.com/products/xtool-ra2-pro?_pos=1&_sid=1e57e74d2&_ss=r&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=44042680533231
In addition to the tilt mechanism, I have also designed and made available a V-Block fixturing kit for the XTOOL F1 ULTRA as shown in this video to process round items without the RA2. It also supports engraving for pencils and bottle openers:
✅ F1 to F1/F2 Ultra Fixture Adapter:
👉 embracemaking.com/products/xtool-f1-to-f1-ultra-fixture-adapter
✅ F1 V-Block, Pencil, Bottle Opener Jig
👉 embracemaking.com/products/xtool-f1-v-block-pencil-bottle-opener-jig
If you need fume extraction solutions for the XTOOL F1, see below:
✅ Fume Filtration and Extraction
👉 embracemaking.com/collections/fume-extraction
✅ Here you can find the 3" to 4" Hose Adapter:
👉 embracemaking.com/products/3-inch-76mm-to-4-inch-101mm-hose-adapter
✅ xTool Air Purifier (AP2)
👉 xtool.com/products/xtool-safetypro-ap2?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306
✅ xTool Inline Fan 2:
👉 xtool.com/products/xtool-safetypro-if2?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306
If you are looking for products or items I've used with the F2 ULTRA in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
✅ xTool Iridescent Tumblers
👉 xtool.com/collections/material-tumbler/products/black-to-iridescent-stainless-steel-tumbler-with-handle-40oz?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=13686
✅ 4" Inline Duct Fan with Controller
👉 amzn.to/4a91Nd4
✅ Air Quality Monitor
👉 amzn.to/3xgoaA2
✅ Electric Screwdriver:
👉 amzn.to/3P43fpz
✅ Digital Calipers:
👉 amzn.to/48IQh7w
✅ 40oz Tumblers (4 pack):
👉 amzn.to/3Mr0EV0
✅ Tall Stainless Tumbler 4-Pack
👉 amzn.to/3CWBXLh
✅ 12oz Mug With Handle (8 Pack)
👉 amzn.to/3wqDadE
✅ 12oz Tumbler With Straw (12 Pack)
👉 amzn.to/3HZswgC
✅ 20oz Tumbler With Straw (25 Pack)
👉 amzn.to/48hQONK
✅ 50 Wood Pencil Pack
👉 amzn.to/3UIzbTT
✅ 100pcs Aluminum Bottle Openers
👉 amzn.to/48sdjja
Always remember to practice proper laser safety. These lasers can seriously harm your eyes or indirectly (your lungs/health). ALWAYS wear your safety glasses!
Thank you @xToollaser
0:00 Intro
0:57 RA2 Limitations
2:57 RA2 Tilt Solution
10:23 Basic Setup
13:34 Powder coated Mug With Handle
19:44 Tapered Tumbler
24:25 Black Engraving
26:53 Full Wrap Design
34:40 Fume Extraction Upgrades
35:56 Color Engrave on Stainless Steel
43:05 40oz Tumbler Full Wrap
57:12 Rings
57:59 No Rotary? No Problem!
1:04:28 Outro
#tumblertutorial #engraving #xtool
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
In this video I will take you in depth into getting started with the XTOOL F2 ULTRA and the RA2 rotary module! I will take you right from the basics to processing more challenging work pieces with a very useful upgrade for the RA2.
Although the RA2 is one of the best rotary modules out there - there are some limitations to what it can do and even more so when working inside of enclosed areas like the xTool F2 ULTRA. Therefore, I designed my tilt mechanism upgrade to overcome these challenges and unlock more possibilities when it comes to rotary engraving inside the F2 ULTRA.
✅ F2 ULTRA Rotary Tilt Kit:
👉 embracemaking.com/products/xtool-f2-ultra-ra2-pro-tilt-mechanism-kit
✅ Back Stop and Bubble Level Holder:
👉 embracemaking.com/products/xtool-ra2-bubble-level-holder-and-backstop-kit
✅ 40oz Full Wrap Bubble Level Tool:
👉 embracemaking.com/products/xtool-ra2-40oz-full-wrap-bubble-level-holder-tool
Since the F2 Ultra does not come with laser safety glasses, I have made safety glasses available that protect your eyes from both blue and infrared laser light. (Perfect for the F2 ULTRA). You can find those glasses here:
👉 embracemaking.com/products/laser-safety-glasses-blue-diode-ir
Haven't purchased your XTOOL F2 ULTRA yet? Links below for the best xTool prices!
✅ XTOOL F2 ULTRA:
👉 xtool.com/products/xtool-f2-ultra-60w-mopa-40w-diode-dual-laser-engraver?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=13686
✅ RA2 Module:
👉 xtool.com/products/xtool-ra2-pro?_pos=1&_sid=1e57e74d2&_ss=r&ref=D5HpJRsyqyUUnt&utm_medium=5306&utm_source=influencer&variant=44042680533231
In addition to the tilt mechanism, I have also designed and made available a V-Block fixturing kit for the XTOOL F1 ULTRA as shown in this video to process round items without the RA2. It also supports engraving for pencils and bottle openers:
✅ F1 to F1/F2 Ultra Fixture Adapter:
👉 embracemaking.com/products/xtool-f1-to-f1-ultra-fixture-adapter
✅ F1 V-Block, Pencil, Bottle Opener Jig
👉 embracemaking.com/products/xtool-f1-v-block-pencil-bottle-opener-jig
If you need fume extraction solutions for the XTOOL F1, see below:
✅ Fume Filtration and Extraction
👉 embracemaking.com/collections/fume-extraction
✅ Here you can find the 3" to 4" Hose Adapter:
👉 embracemaking.com/products/3-inch-76mm-to-4-inch-101mm-hose-adapter
✅ xTool Air Purifier (AP2)
👉 xtool.com/products/xtool-safetypro-ap2?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306
✅ xTool Inline Fan 2:
👉 xtool.com/products/xtool-safetypro-if2?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=5306
If you are looking for products or items I've used with the F2 ULTRA in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):
✅ xTool Iridescent Tumblers
👉 xtool.com/collections/material-tumbler/products/black-to-iridescent-stainless-steel-tumbler-with-handle-40oz?ref=D5HpJRsyqyUUnt&utm_medium=affiliate&utm_source=goaffpro&utm_term=13686
✅ 4" Inline Duct Fan with Controller
👉 amzn.to/4a91Nd4
✅ Air Quality Monitor
👉 amzn.to/3xgoaA2
✅ Electric Screwdriver:
👉 amzn.to/3P43fpz
✅ Digital Calipers:
👉 amzn.to/48IQh7w
✅ 40oz Tumblers (4 pack):
👉 amzn.to/3Mr0EV0
✅ Tall Stainless Tumbler 4-Pack
👉 amzn.to/3CWBXLh
✅ 12oz Mug With Handle (8 Pack)
👉 amzn.to/3wqDadE
✅ 12oz Tumbler With Straw (12 Pack)
👉 amzn.to/3HZswgC
✅ 20oz Tumbler With Straw (25 Pack)
👉 amzn.to/48hQONK
✅ 50 Wood Pencil Pack
👉 amzn.to/3UIzbTT
✅ 100pcs Aluminum Bottle Openers
👉 amzn.to/48sdjja
Always remember to practice proper laser safety. These lasers can seriously harm your eyes or indirectly (your lungs/health). ALWAYS wear your safety glasses!
Thank you @xToollaser
0:00 Intro
0:57 RA2 Limitations
2:57 RA2 Tilt Solution
10:23 Basic Setup
13:34 Powder coated Mug With Handle
19:44 Tapered Tumbler
24:25 Black Engraving
26:53 Full Wrap Design
34:40 Fume Extraction Upgrades
35:56 Color Engrave on Stainless Steel
43:05 40oz Tumbler Full Wrap
57:12 Rings
57:59 No Rotary? No Problem!
1:04:28 Outro
#tumblertutorial #engraving #xtool
*******************************************************
If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► paypal.com/donate/?hosted_button_id=V2T6MEFUGP73Y
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► instagram.com/embracemaking
