Uploaded June 2019 | Updated September 2026, 2 weeks ago
Link to purchase item: x8r.co.uk/alfa-romeo-fiat-1-9-jtdm-jtd-multijet-intake-manifold-swirl-flap-rod-repair-kit.html?utm_source=youtube&utm_medium=social&utm_campaign=analytics
Symptoms of fault:
Engine management light (EML) lit, high fuel consumption, rough idling, rough running, poor power and torque, smoking from exhaust, error P2279-11 Intake system air leak,P2075 fault code?
The fault:
The bearing bushes on the swirl flap operating rod wear and the rod pops off causing the symptoms noted above.
All of these symptoms can be caused by the swirl flap operating rod bushes wearing making the operating rod pop off; stopping the swirl flaps from operating, you will often see the rod lying on top of the intake manifold.
The solution:
Replace the operating rod with our improved design rod fitted with brass bearing bushes designed to not pop off again!
Rather than having to remove the manifold and replace at great cost with the problem reoccurring in the future our rod replacement solves this issue, replace the unreliable bush bearings with our improved design bearings which will not fail again. Our self lubricating bushes are made from billet Brass, fitted with a Viton O-ring and Stainless steel fasteners, designed to never fail again.
Our rod is a direct replacement, our rod comes fully constructed with brass buses so will simply push fit on to the manifold. We also offer the brass bushes on their own in our store if you wish to save a little money by reusing the original rod.
Vehicles affected:
Please check our website for the full list of vehicles affected.
You will receive:
1x Rod fitted with 4 x brass bushes and viton o-rings
Link to purchase item: x8r.co.uk/alfa-romeo-fiat-1-9-jtdm-jtd-multijet-intake-manifold-swirl-flap-rod-repair-kit.html?utm_source=youtube&utm_medium=social&utm_campaign=analytics
Symptoms of fault:
Engine management light (EML) lit, high fuel consumption, rough idling, rough running, poor power and torque, smoking from exhaust, error P2279-11 Intake system air leak,P2075 fault code?
The fault:
The bearing bushes on the swirl flap operating rod wear and the rod pops off causing the symptoms noted above.
All of these symptoms can be caused by the swirl flap operating rod bushes wearing making the operating rod pop off; stopping the swirl flaps from operating, you will often see the rod lying on top of the intake manifold.
The solution:
Replace the operating rod with our improved design rod fitted with brass bearing bushes designed to not pop off again!
Rather than having to remove the manifold and replace at great cost with the problem reoccurring in the future our rod replacement solves this issue, replace the unreliable bush bearings with our improved design bearings which will not fail again. Our self lubricating bushes are made from billet Brass, fitted with a Viton O-ring and Stainless steel fasteners, designed to never fail again.
Our rod is a direct replacement, our rod comes fully constructed with brass buses so will simply push fit on to the manifold. We also offer the brass bushes on their own in our store if you wish to save a little money by reusing the original rod.
Vehicles affected:
Please check our website for the full list of vehicles affected.
You will receive:
1x Rod fitted with 4 x brass bushes and viton o-rings
