Uploaded January 2024 | Updated September 2026, 3 weeks ago
Today I’m altering my office and adding a resin printing work station. I have a large resin printer, a machine that washes my prints with isopropyl alcohol and a curing booth. I have several IKEA Bror work trolleys and I’m adding a few here because of their versatility, ease to assemble and frankly, because I think they look cool. 😁 Here is a link: ikea.com/us/en/p/bror-utility-cart-black-pine-plywood-60333850
IKEA, hit me up. 😂
Order the HeyGears UltraCraft Reflex here: store.heygears.com/referral/reflex033
Check the HeyGears IdeaShapers community: bit.ly/41ZgYle
For fantastic RC printable content, have a look at MyMiniFactory: myminifactory.com/category/rc-cars
Horizon Hobby: bit.ly/34TOT6I
Axial SCX24 at Horizon: bit.ly/3LjEGkf
AXIAL SCX6 in silver: bit.ly/3aBbSmO
Or the green one, which also looks fantastic: bit.ly/3FPDFyr
Get your stainless steel KNK hardware here: bit.ly/36M9GKK
To do your own Short WheelBase 2 door Jeep Wrangler conversion you need:
3 of these, which is the Panhard Link set: bit.ly/3bjaEk2
2 of these Steering link sets: bit.ly/3boDTSH
1 of these, Front Upper link, you reuse the other original one: bit.ly/3oIafuC
Rod end set: bit.ly/3cYcbwj
Pivot balls: bit.ly/3BwKk0w
I love the possibilities offered by 3D printing! Along with my laser cutter and my CNC machine, they allow me to create pretty much anything I want for my RC cars, regardless of which scale they're in. So far, I have had a lot of fun printing with my FDM printer, but I didn't find resin printer really enjoyable. Until now!
Resin printers can be tricky to set up: they need to be perfectly level; the resin needs to be filled properly and cleaning them is a nightmare. Not with this new HeyGears UltraCraft Reflex!
I've been successfully printing parts in various shapes and sizes for the past few months, and I have only had successful prints using this machine and the other elements in their setup.
The UltraCraft Reflex auto fills the resin tub and monitors the level. The layer thickness is adjusted in accordance with the resin used. To ensure a good and solid start of each print, there is Intelligent Assisted Leveling, getting the print to stick to the industrial grade build plate every single time. The BluePrint software sends the sliced file to your machine via WiFi, once it has assisted you in orienting and supporting the file of your choice.
Once parts are printed, they get washed in the HeyGears washing station to eventually be transferred to the last machine, a dual UV-wavelength curing station, which can even heat your parts to up to 60 degrees Celsius, to get your paint to cure along with your print.
This machine range is fantastic and has taken away my fear of failed resin prints forever!
Check out Knight Customs for the files used in today's video.
Knight Customs MyMiniFactory store: myminifactory.com/users/Knight_Customs
APPAREL! 🙂 teespring.com/stores/hemistore
If you haven't subscribed yet, please do. It's free. NO PayPal, NO Patreon and especially no GoFundme nonsense. I hate those.
Check out HemiStorm Products on FaceBook here: facebook.com/home.php#!/pages/HemiStorm-Products/236585496380241
HemiStorm on Instagram: instagram.com/hemistorm
#rcstudio #3dprinting #rcworkshop
Today I’m altering my office and adding a resin printing work station. I have a large resin printer, a machine that washes my prints with isopropyl alcohol and a curing booth. I have several IKEA Bror work trolleys and I’m adding a few here because of their versatility, ease to assemble and frankly, because I think they look cool. 😁 Here is a link: ikea.com/us/en/p/bror-utility-cart-black-pine-plywood-60333850
IKEA, hit me up. 😂
Order the HeyGears UltraCraft Reflex here: store.heygears.com/referral/reflex033
Check the HeyGears IdeaShapers community: bit.ly/41ZgYle
For fantastic RC printable content, have a look at MyMiniFactory: myminifactory.com/category/rc-cars
Horizon Hobby: bit.ly/34TOT6I
Axial SCX24 at Horizon: bit.ly/3LjEGkf
AXIAL SCX6 in silver: bit.ly/3aBbSmO
Or the green one, which also looks fantastic: bit.ly/3FPDFyr
Get your stainless steel KNK hardware here: bit.ly/36M9GKK
To do your own Short WheelBase 2 door Jeep Wrangler conversion you need:
3 of these, which is the Panhard Link set: bit.ly/3bjaEk2
2 of these Steering link sets: bit.ly/3boDTSH
1 of these, Front Upper link, you reuse the other original one: bit.ly/3oIafuC
Rod end set: bit.ly/3cYcbwj
Pivot balls: bit.ly/3BwKk0w
I love the possibilities offered by 3D printing! Along with my laser cutter and my CNC machine, they allow me to create pretty much anything I want for my RC cars, regardless of which scale they're in. So far, I have had a lot of fun printing with my FDM printer, but I didn't find resin printer really enjoyable. Until now!
Resin printers can be tricky to set up: they need to be perfectly level; the resin needs to be filled properly and cleaning them is a nightmare. Not with this new HeyGears UltraCraft Reflex!
I've been successfully printing parts in various shapes and sizes for the past few months, and I have only had successful prints using this machine and the other elements in their setup.
The UltraCraft Reflex auto fills the resin tub and monitors the level. The layer thickness is adjusted in accordance with the resin used. To ensure a good and solid start of each print, there is Intelligent Assisted Leveling, getting the print to stick to the industrial grade build plate every single time. The BluePrint software sends the sliced file to your machine via WiFi, once it has assisted you in orienting and supporting the file of your choice.
Once parts are printed, they get washed in the HeyGears washing station to eventually be transferred to the last machine, a dual UV-wavelength curing station, which can even heat your parts to up to 60 degrees Celsius, to get your paint to cure along with your print.
This machine range is fantastic and has taken away my fear of failed resin prints forever!
Check out Knight Customs for the files used in today's video.
Knight Customs MyMiniFactory store: myminifactory.com/users/Knight_Customs
APPAREL! 🙂 teespring.com/stores/hemistore
If you haven't subscribed yet, please do. It's free. NO PayPal, NO Patreon and especially no GoFundme nonsense. I hate those.
Check out HemiStorm Products on FaceBook here: facebook.com/home.php#!/pages/HemiStorm-Products/236585496380241
HemiStorm on Instagram: instagram.com/hemistorm
#rcstudio #3dprinting #rcworkshop
