Uploaded July 2024 | Updated September 2026, 2 weeks ago
James dives into Pico Technology's latest PicoScope oscilloscopes software, PicoScope 7. Using a PicoScope 2000A James walks through key measurements and demonstrations using the built-in arbitrary waveform generator. He explores new functionalities in PicoScope 7, such as the improved UI, a unique feature called DeepMeasure, and decoding I3C traffic.
Read the full episode blog on the #element14community : bit.ly/4dhbvMn
James dives into Pico Technology's latest PicoScope oscilloscopes software, PicoScope 7. Using a PicoScope 2000A James walks through key measurements and demonstrations using the built-in arbitrary waveform generator. He explores new functionalities in PicoScope 7, such as the improved UI, a unique feature called DeepMeasure, and decoding I3C traffic.
Read the full episode blog on the #element14community : bit.ly/4dhbvMn



![Building “Dröne”: A Capacitive Synth That Uses Your Body as Part of the Circuit
Clem (@MAYERMAKES) takes inspiration from Tom Morello of Rage Against the Machine to build Dröne, a DIY body-controlled synth that recreates Morello’s famous “cable tip” sound. By using his body as part of the circuit, Clem explores how capacitance and inductance can create controllable, evolving tones. What starts as an experiment becomes a playable instrument that reacts to touch, proximity, and movement, even burning out a vintage speaker in the process. Watch how Clem turns a strange guitar trick into a full-blown electronic music project! https://bit.ly/43ccpar
1.[02:36]-Experiments
2.[04:20]-The Circuit
3.[11:19]-Assembly
4.[12:22]-Demo
#DIYsynth #TomMorello #ElectronicsProjects
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Building “Dröne”: A Capacitive Synth That Uses Your Body as Part of the Circuit](https://i.ytimg.com/vi/paYoYXogk8o/mqdefault.jpg)



![Add a Multicolor Filament Changer to Any 3D Printer | Open Source Solution
Clem rebuilds the 3D Chameleon MK4 from the ground up, replacing the legacy electronics with a modern ATtiny3226 controller, TMC2209 drivers, thermistor-controlled cooling, and clearer status indicators. The mechanical system stays true to the original open-source design, but the updated hardware is easier to assemble, easier to source, and designed for reliable multicolor filament changes without modifying your printer’s firmware. The full project, files, and code are available on the element14 Community: https://bit.ly/3Y66qRC
#3DPrinting #OpenSourceHardware #3dprinting
[01:37]-Mechanical
[02:18]-Electronics
[03:39]-Clems Biggest Fan!
[05:31]-Schematic
[11:41]-Populating the PCB
[18:20]-wrap up
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Add a Multicolor Filament Changer to Any 3D Printer | Open Source Solution](https://i.ytimg.com/vi/qDFDKiqj0p8/mqdefault.jpg)


