Add a Multicolor Filament Changer to Any 3D Printer | Open Source Solution @element14presents
Add a Multicolor Filament Changer to Any 3D Printer | Open Source Solution  @element14presents
Uploaded December 2025 | Updated November 2026, 6 days ago
Clem rebuilds the 3D Chameleon MK4 from the ground up, replacing the legacy electronics with a modern ATtiny3226 controller, TMC2209 drivers, thermistor-controlled cooling, and clearer status indicators. The mechanical system stays true to the original open-source design, but the updated hardware is easier to assemble, easier to source, and designed for reliable multicolor filament changes without modifying your printer’s firmware. The full project, files, and code are available on the element14 Community: bit.ly/3Y66qRC

#3DPrinting #OpenSourceHardware #3dprinting

[01:37]-Mechanical
[02:18]-Electronics
[03:39]-Clem's Biggest Fan!
[05:31]-Schematic
[11:41]-Populating the PCB
[18:20]-wrap up

=================================================================================

Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv

Visit the element14 Community for more great activities and free hardware:

Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY
Add a Multicolor Filament Changer to Any 3D Printer | Open Source SolutionSynced NeoPixel Mickey Mouse Ears using micro:bitFrom Kit to Custom Design: Building a Tube-Based FM RadioCan Polymer Capacitors Replace MLCCs in Power Converters? A Comparative Test​@MAYERMAKES  builds a minimalist dumb watch using the ATtiny412! #ledwatch  #Electronics #makerTesting, Testing! Emergency Mint Tin Radio!DIY Single Board Computer with esp32 and Raspberry Pi Pico!I Put Bluetooth 6.0 Channel Sounding on the nRF54L15 to the Test : Here’s What Actually HappensCan you see the Inductor??I Put AI Inside a Terminator Skull… and It Follows You - Raspberry Pi AIRobotics 101 - Watch Me Make my own Robotic Arm - Ep. 3Building a DIY Industrial PLC with PocketBeagle 2, Linux and Realtime I/O
element14 presents |

Add a Multicolor Filament Changer to Any 3D Printer | Open Source Solution

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER