![Winter time - RC Snow Plow with 17Kg Traxxas summit [hydraulic powered plow] @TinC33](https://i.ytimg.com/vi/gm4Hr7pFyUk/maxresdefault.jpg)
Uploaded March 2018 | Updated September 2026, 3 weeks ago
Hy There,
Today, i just make a quick video about heaving fun in winter time with my traxxas summit and homemade hydraulic powered snow plow.
There is a bit low amount of snow, just about 5cm and we walk and drive over this snow so it was a bit hard and freezed under because there's freezing those days (about -10°C)
If i catch the fresh snow without someone drive over it, summit can push about 10-15cm of wet snow without problem.
I cahge tyres, with Pro-Line racing BIG JOE because, original one is far too soft for job like that(winter service :) )
Also the motor and controller is brushless which work perfect for a few years now, more about setup can see there:
youtube.com/watch?v=JkdnzhiVQkA
For normal driving i drive on 4s but for plowing i use only one 2s packet for power the summit and on other side one pack of 2s for powered hydraulic pump motor, also the summit is much slower with 2s.
For lifting the plow i use single channel from original transmitter, instead of 1st and 2nd gear switch i mount two buttons in it, so i got 3 pozition on one channel for controlling hydraulic, more about it you can see there:
youtube.com/watch?v=jLYJOSKB4QU
Servo for gear simply put in first gear posittion and disconnect them, than connect hydraulic servo on it's place.
I also try with chains on tyres but got worst result, grip was just so bad.
Snow plow size is 20cm by 60cm by 3mm aluminium.
more videos about plowing:
youtube.com/watch?v=0FM2hFYzTPs&t
youtube.com/watch?v=-ysOO3XsOXE&t
My first plow on HPI E-savage:
youtube.com/watch?v=gA6bX9t7oLA&t
Hydraulic:
youtube.com/watch?v=WaeEBXaj-vA&t
youtube.com/watch?v=jLYJOSKB4QU
youtube.com/watch?v=-2gwtHt5AxA
making cylinder:
youtube.com/watch?v=QRg0ZAvxVFk&t
And just a bit summit bashing in winter:
youtube.com/watch?v=NLKK_PvaKSU
Traxxas Summit is my far far favorite car, and i got lot of cars until now, it's great for easy chill driving and for crawling, it's simple unstoppable, so just one more video about sunday driving:
youtube.com/watch?v=ofaVjYpYDNw
If you interested for more videos about snow plow, please let me know.
I also got one new plow for traxxas just like that one if someone interested.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000, Gopro4 black, Dji osmo+
Music is from YouTube audiolibrarry:
The Hunter - Audionautix
Now Launch - The Brothers Records
Skladba The Hunter izvajalca Audionautix je licencirana z licenco Creative Commons Attribution (creativecommons.org/licenses/by/4.0/)
Izvajalec: audionautix.com
Hy There,
Today, i just make a quick video about heaving fun in winter time with my traxxas summit and homemade hydraulic powered snow plow.
There is a bit low amount of snow, just about 5cm and we walk and drive over this snow so it was a bit hard and freezed under because there's freezing those days (about -10°C)
If i catch the fresh snow without someone drive over it, summit can push about 10-15cm of wet snow without problem.
I cahge tyres, with Pro-Line racing BIG JOE because, original one is far too soft for job like that(winter service :) )
Also the motor and controller is brushless which work perfect for a few years now, more about setup can see there:
youtube.com/watch?v=JkdnzhiVQkA
For normal driving i drive on 4s but for plowing i use only one 2s packet for power the summit and on other side one pack of 2s for powered hydraulic pump motor, also the summit is much slower with 2s.
For lifting the plow i use single channel from original transmitter, instead of 1st and 2nd gear switch i mount two buttons in it, so i got 3 pozition on one channel for controlling hydraulic, more about it you can see there:
youtube.com/watch?v=jLYJOSKB4QU
Servo for gear simply put in first gear posittion and disconnect them, than connect hydraulic servo on it's place.
I also try with chains on tyres but got worst result, grip was just so bad.
Snow plow size is 20cm by 60cm by 3mm aluminium.
more videos about plowing:
youtube.com/watch?v=0FM2hFYzTPs&t
youtube.com/watch?v=-ysOO3XsOXE&t
My first plow on HPI E-savage:
youtube.com/watch?v=gA6bX9t7oLA&t
Hydraulic:
youtube.com/watch?v=WaeEBXaj-vA&t
youtube.com/watch?v=jLYJOSKB4QU
youtube.com/watch?v=-2gwtHt5AxA
making cylinder:
youtube.com/watch?v=QRg0ZAvxVFk&t
And just a bit summit bashing in winter:
youtube.com/watch?v=NLKK_PvaKSU
Traxxas Summit is my far far favorite car, and i got lot of cars until now, it's great for easy chill driving and for crawling, it's simple unstoppable, so just one more video about sunday driving:
youtube.com/watch?v=ofaVjYpYDNw
If you interested for more videos about snow plow, please let me know.
I also got one new plow for traxxas just like that one if someone interested.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000, Gopro4 black, Dji osmo+
Music is from YouTube audiolibrarry:
The Hunter - Audionautix
Now Launch - The Brothers Records
Skladba The Hunter izvajalca Audionautix je licencirana z licenco Creative Commons Attribution (creativecommons.org/licenses/by/4.0/)
Izvajalec: audionautix.com
![Winter time - RC Snow Plow with 17Kg Traxxas summit [hydraulic powered plow]](https://i.ytimg.com/vi/gm4Hr7pFyUk/mqdefault.jpg "Winter time - RC Snow Plow with 17Kg Traxxas summit [hydraulic powered plow]
Hy There,
Today, i just make a quick video about heaving fun in winter time with my traxxas summit and homemade hydraulic powered snow plow.
There is a bit low amount of snow, just about 5cm and we walk and drive over this snow so it was a bit hard and freezed under because theres freezing those days (about -10°C)
If i catch the fresh snow without someone drive over it, summit can push about 10-15cm of wet snow without problem.
I cahge tyres, with Pro-Line racing BIG JOE because, original one is far too soft for job like that(winter service :) )
Also the motor and controller is brushless which work perfect for a few years now, more about setup can see there:
https://www.youtube.com/watch?v=JkdnzhiVQkA
For normal driving i drive on 4s but for plowing i use only one 2s packet for power the summit and on other side one pack of 2s for powered hydraulic pump motor, also the summit is much slower with 2s.
For lifting the plow i use single channel from original transmitter, instead of 1st and 2nd gear switch i mount two buttons in it, so i got 3 pozition on one channel for controlling hydraulic, more about it you can see there:
https://www.youtube.com/watch?v=jLYJOSKB4QU
Servo for gear simply put in first gear posittion and disconnect them, than connect hydraulic servo on its place.
I also try with chains on tyres but got worst result, grip was just so bad.
Snow plow size is 20cm by 60cm by 3mm aluminium.
more videos about plowing:
https://www.youtube.com/watch?v=0FM2hFYzTPs&t
https://www.youtube.com/watch?v ysOO3XsOXE&t
My first plow on HPI E-savage:
https://www.youtube.com/watch?v=gA6bX9t7oLA&t
Hydraulic:
https://www.youtube.com/watch?v=WaeEBXaj-vA&t
https://www.youtube.com/watch?v=jLYJOSKB4QU
https://www.youtube.com/watch?v 2gwtHt5AxA
making cylinder:
https://www.youtube.com/watch?v=QRg0ZAvxVFk&t
And just a bit summit bashing in winter:
https://www.youtube.com/watch?v=NLKK_PvaKSU
Traxxas Summit is my far far favorite car, and i got lot of cars until now, its great for easy chill driving and for crawling, its simple unstoppable, so just one more video about sunday driving:
https://www.youtube.com/watch?v=ofaVjYpYDNw
If you interested for more videos about snow plow, please let me know.
I also got one new plow for traxxas just like that one if someone interested.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500, Sony A6000, Gopro4 black, Dji osmo+
Music is from YouTube audiolibrarry:
The Hunter - Audionautix
Now Launch - The Brothers Records
Skladba The Hunter izvajalca Audionautix je licencirana z licenco Creative Commons Attribution (https://creativecommons.org/licenses/by/4.0/)
Izvajalec: http://audionautix.com/")
![DT2236C Digital Laser / contact RPM Tachometer [unbox / review / first test]](https://i.ytimg.com/vi/hGeMAI1ir2M/mqdefault.jpg "DT2236C Digital Laser / contact RPM Tachometer [unbox / review / first test]
Hy There, In this video ill show you my new rpm measuring tool i got from banggood.Really usefull tool for awesome price.You can buy these items here:
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
DT2236C Digital Laser / contact Tachometer
https://www.banggood.com/custlink/3GmEr5RTBe
coupon code: BG169986
discount price: $19.99
exp:31.8
Other tachometers (analog, engine, marine, laser...):
https://www.banggood.com/custlink/vKGhJVE7N3
Description :
DT2236C Digital Laser RPM Tachometer Contact Measurement Tool
Features :
Stylish, comfortable to use and easy to operate.
Laser / contactless ID cards, meet the needs of measurement occasions.
Wide measurement range, high resolution, fully functional.
The max / min / final value record.
Specification :
Show : 5 LCD display, the subtitles length is 10mm
Power : 4 x AA alcaline batteries
Instrument Size : 215 (L) x 65(W)x38 (H) mm
Annex : Retail box, reflective paper (9 centimeters x2), tapered adapter, funnel-shaped adapter, wire-speed ferry.
Test Distance : Approx.3cm - 2m
Functional Range Resolution Uncertainty
Speed 2.5~999.9 0.1RPM ±(0.05%+1d)
1000~99999 1RPM
Speed Line 0.05~99.99 0.01M/min
100.0 More 0.1M/min
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: YouTube audiolibrary
1: Heads Up - The 126ers
2: Warships - The 126ers
3: See You On The Otherside - The 126ers")
![MUSTOOL X1 Pocket 6000 Counts True RMS Clamp Meter AC/DC [unbox / review / first test]](https://i.ytimg.com/vi/hHHzAOi0jUc/mqdefault.jpg "MUSTOOL X1 Pocket 6000 Counts True RMS Clamp Meter AC/DC [unbox / review / first test]
Hy There,
In this video ill show you amazing clamp multimeter for under 25$ i got from banggood.
You can buy these items here:
https://www.banggood.com/custlink/v3DhVMNkuj
Coupon : BGHU0229
Other clamp meters:
https://www.banggood.com/custlink/GDmdFqAkfw
Other hot deals:
https://www.banggood.com/bottom-price-storm.html?utmid=15656
Banggood Black Friday:
https://www.banggood.com/marketing-black-friday-shopping-festival/tid-12672.html?utmid=15651
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Mustool MT336 clamp meter review:
https://youtu.be/NIQ5Y4CYbOY
More about X1:
Overview:
This is a pocket-sized 3 5/6-digit automatic digital meter.
It has stable performance, high precision, high reliability, clear reading and overload protection.
Driven by AAA 1.5V battery, the instrument adopts large screen LCD display and adopts boost power supply.
Even at the edge of 2.3V low battery, it can ensure the high brightness of backlight and flashlight.
The meter is easy to carry and is very popular among users.
The instruments backlight can be turned on and off automatically after 15 seconds.
This series of instruments can be used to measure DC voltage and AC voltage, AC and DC current 600A, resistance, capacitance, diode, temperature, continuity test, square wave output, frequency measurement and true RMS.
It is a superior tool and an ideal tool for laboratories, factories, radio enthusiasts and families.
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: Epidemic Sound:
1: ES_Love Love Love (Instrumental Version) - OTE
2: ES_Youre Out (Instrumental Version) - The Devils Sway
3: ES_Leaving the Crossfire (Instrumental Version) - Conditional")
![BlitzWolf® BW-S7 QC3.0 40W 5 USB Desktop Charger [Qualcomm Certified] from banggood](https://i.ytimg.com/vi/hlIpWwWOZbI/mqdefault.jpg "BlitzWolf® BW-S7 QC3.0 40W 5 USB Desktop Charger [Qualcomm Certified] from banggood
Hy There,
In this video ill show you my new great blitzwolf BW-S7 charger.
Its really nice design and very quality made, its also do their job more then good, i dont got worries anymore how to charge all that
devices at one time.
You can order here:
(i do not reaceived any payment if you order from that links)
BlitzWolf® BW-S7 charger: https://bit.ly/2MWztli
BlitzWolf® BW-MC12 Micro USB: https://bit.ly/2SDX2V9
BlitzWolf® BW-MC13 Micro USB: https://bit.ly/2RNC9Tf
BlitzWolf® BW-TC13 cable: https://bit.ly/2tcnl6L
Angle Grinder: https://bit.ly/2MYhGu2 (15%off coupon:759ccb)
3000mW USB Laser Engraver: https://bit.ly/2RTdNHw
Test-Equipments big sale: https://bit.ly/2SoWbsm
Power tool sale: https://bit.ly/2GjRQAb
Product description:
Qualcomm Quick Charge 3.0 Tech :
Quick Charge 3.0 is engineered to refuel devices up to four times faster than conventional charging.With automatic voltage adjustment it provides
better control of power consumption and keeps charging temperature low. It is designed to charge twice as fast as Quick Charge 1.0 and to be 38%
more efficient than Quick Charge 2.0.WithQuick Charge 3.0 you can charge a typical phone from 0 to 80% in about 35 minutes.
Qualcomm Certified (QC3.0): NT6008 Fast Charge Chip:
BlitzWolf BW-S7 uses the NT6008 fast charging chip that not only supports QC3.0 fast charge tech but also is backwards compatible with all
previous versions of Qualcomm Quick Charge technology (1.0, 2.0 & 3.0). It is also compatible with USB Type-C and can provide standard
charging for non-Quick Charge devices.
BC1.2 & Apple Fast Charge Protocol:
It means your Apple devices can be fast charging just like using the original Apple iPad charger (up to 5V/2.4A Max).It is also compatible with all
non-QC devices and will charge at their normal charging speed (up to 5V/2A Max).
Power3S Technology:
Intelligently identifies the electronic device and speaks the language it needs for full speed charging.This allows you to enjoy fast safe charging
that matches your device.
QC3.0+4.4A 40W Powerful Output:
QC3.0 mode: Variable 3.6V-12V with 200mV incremental dynamic regulation
QC2.0 mode: Stepped 5v/2.4A ,9V/2A and 12V/1.5A . Rated at 18W but can peak at up to 12V/2A~24W.
Standard Fast 4.4A Mode: 5V/4.4A. Rated at 22W.
Four Plug Types:
1.5m AC power cord with US UK EU AU plug.
Most of the customers will be able to find a suitable plug.
Safe and Sturdy Design:
Lightweight, compact and easily portable. Contains internal Power3S protection for over-current, overheat, short circuit and over-voltage detection.
18-Month Warranty:
We believe in our products and we back them all with an 18 months warranty and provide friendly and convenient support.
Specifications:
Brand BlitzWolf®
Model BW-S7
Plug EU, US, UK,AU
USB Port 18W(Max) QC3.0 Port + 22W(Max) 4.4A 4-Ports
Total Power 40W (Max)
Input AC 100-240V~50/60Hz 1A
Output 4-Ports: 5V/4.4A (Max)
QC3.0 Port: 3.6-6.5V/2.4A
6.5-9V/2A 9-12V/1.5A (Max)
Size 91mm(3.6inch)*58mm(2.3inch)*26mm(1.01 inch)
Color White
Weight 400g±10g
Certification CE,FCC,RoHS,Qualcomm QC3.0
Package Includes:
1 * BlitzWolf® BW-S7 QC3.0+4.4A 40W 5 USB Ports Charger
1 * BlitzWolf® BW-S7 User Manual
1 * BlitzWolf® Warranty Card
FAQ & Solutions
1. What is the difference between the Power3S charging ports & Standard charging ports?
The Power3S charging ports are Capable of charging any kinds of device at full speed while the Standard charging ports can only charging the device that fit for
the system of ports at full speed,such as iOS & Android devices
2. What if the 5-ports Desktop Charger is not charging my device(s)?
A. Check to ensure that your device is USB-powered with an input current between 0 and 2.4A and a voltage input of 5V.
B. Check to ensure that the power cord is connected to an active wall outlet and also firmly connected to the dual-port Desktop Charger.
3. How do I check my devices Input current and voltage?
Please refer to your device’s user manual, original OEM charging adapter, or contact the manufacturer to determine this information.
4. My device charges at 1Amp,will this chargers 2.4Amp output harm it?
No. The charger will only supply the maximum charge current allowed by your device up to 2.4Amps.
5. Will my device charge at full speed 2.4A?
2.4A charging is dependent on the capability of your device, please check your smartphones manual to see the maximum Amps (A) your device can charge at.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro, zeiss touit 50f2.8, sel 16-50 f3.5-6.5]
GoPro 7 Black
Music is from YT audiolibrary:
Lets Go Home - Jeremy Blake")
![Making of: Clip for fast removable strap [belt] on sony cameras](https://i.ytimg.com/vi/iKy5tXA-ZpQ/mqdefault.jpg "Making of: Clip for fast removable strap [belt] on sony cameras
Hy There,
More or less i need my cameras without strap but sometimes i need them, taking the strap up and down was really annoying for me, so i make a simple clip to remove it or putting back in a second.
They hold 20kg easily so i thing theyr strong enough.
Another positive think there is that i loose annoying sound from the original strap clips (ring) on body
I would bought some clip but the holes in camera body is just about 2mm big, so need some hour or two and make this clips.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera: Sony A6500-sel 18-200, Sony A6000-sel30 3.5 macro, gopro 4
Music is from YouTube audiolibrarry:
Rev - Eveningland")
![DIY Cable Cam for gopro, [remote contoll, brushless motor]](https://i.ytimg.com/vi/j26w-alAwVw/mqdefault.jpg "DIY Cable Cam for gopro, [remote contoll, brushless motor]
In this video ill show you my cable cam its not 100% finished yet but its ready to use, i just work a bit more on motor vibration at low rpm.
Component i use:
-aluminium frame with two wheels
-1:10 rc car system (1489kv sensored motor & esc) there is a bit too much rpm, if you got motor with less than 1000kv it will be perfect for direct drive
-2s5000mAh lipo battery (7,4V)
-stepup circuit for power the videotransmitter with 12V
-RC filter to power videtransmitter
-reaceiver&transmitter Using only 3channels of 12 on my futaba t12FG
-DYS 3axis gopro gimbal
- 1.2ghz videolink
Video of rope reel:
https://www.youtube.com/watch?v=pP2g4rHv0Uo&t=
And cable tensioner:
https://www.youtube.com/watch?v=Xlyx5z1blD8&t=
Music:
Silver, Riot from YT audio library")
![Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]](https://i.ytimg.com/vi/k2a9ywCEK_A/mqdefault.jpg "Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]
Hy There,
I use DORMER A117 HSCO drills in this video!
In this video ill show you how i make super small and precise lathe cutting tool, i just make a simple holder and grind broken dill bits into usefull cutting inserts
there are lot of option to grind different shape of knife by your needs, i just make a few basic one like for turning, facing, boring, internal turning and thread cutting.
i use 3.3mm drill bits so with this insert i can cut M4 internal thread.
This tool is really very usefull and alsmost free to make
Making of: Dremel / Proxxon drill holder for mini lathe
https://www.youtube.com/watch?v=1AJPM3GXaco&t
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 4 Black
Music is from NCS:
Track: Distrion & Electro-Light - Drakkar [NCS Release] Music provided by NoCopyrightSounds. Watch: https://youtu.be/YJTae5ScvQA Free Download / Stream: http://ncs.io/DrakkarYO")
![NEJE Master 2 max with 30W modul 460 x 810 mm engraver / cutter [unbox / review / first test]](https://i.ytimg.com/vi/kBJLl4jsCG0/mqdefault.jpg "NEJE Master 2 max with 30W modul 460 x 810 mm engraver / cutter [unbox / review / first test]
Hy There,
In this video ill show you another laser i got from neje manufaturer to test.
I already test a few laser engravers / cutters, but that one is deffinitely another level machine.
You can buy these items here:
Neje machines on neje store:
https://shareasale.com/r.cfm?b=1634981&u=2689002&m=101855&urllink=&afftrack=717061
Different moduls from neje shop:
https://shrsl.com/2qckr
master 2 series machine and module coupon: V010WZ38E9ZN
Neje on banggood:
https://www.banggood.com/custlink/GvvRSCVoPm
Neje on gearbest:
http://gbe.st/302y62l
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Neje max:
https://www.youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
https://www.youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
https://www.youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
https://www.youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
https://www.youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
https://www.youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
https://www.youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
https://www.youtube.com/watch?v=YoYEFVLAzy0
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: Epidemic Sound
1: ES_Highlander - Andre Aguado
2: ES_Democracy Manifest - Jones Meadow
3: ES_I Hear the Calling (Instrumental Version) - Wildson
4: ES_Stays the Same (Instrumental Version) - Gloria Tells")
![Making 3s [12V] 18650 protected battery pack & truth about meco 4000mAh battery](https://i.ytimg.com/vi/kDAxgpAPOAY/mqdefault.jpg "Making 3s [12V] 18650 protected battery pack & truth about meco 4000mAh battery
Hy There,
In this vido i will make a 3s (12V) battery pack out of 18650 LiIon battery cells.
I bought some cheap battery with a good 5 stars review, from banggood:
MECO 3.7v 4000mAh Protected Rechargeable 18650 Li-ion Battery
Later i figured out that that battery dont got 4000mAh of capacity as its described, but got only 1800mAh.
Each battery cell got overcharged, overdischarged and overcurrent protection inside, but i remove them because of problems i had with.
.STL files for printing the frame (housing):
https://www.thingiverse.com/thing:3716424
there is my affiliate links to that batteries if you need it anyway.
On the end its super cheap battery and its got solid 1800mAh of capacity.
2PCS MECO 3.7v 4000mAh Protected Rechargeable 18650 Li-ion Battery:
https://www.banggood.com/custlink/vGGGtN3o95
4PCS MECO 3.7v 4000mAh Protected Rechargeable 18650 Li-ion Battery:
https://www.banggood.com/custlink/3GmGtbDaii
10PCS MECO 3.7v 4000mAh Protected Rechargeable 18650 Li-ion Battery
https://www.banggood.com/custlink/mGv35s3a9l
Seiko Protection IC 10A Protection Board For 3S 11.1V 12V 12.6V 18650 Lipo Battery :
https://www.banggood.com/custlink/v3mDPnvjSe
2M PVC Heat Shrink Tubing Shrink Tube 18650 Battery Shrink Sleeve Insulation Casing Heat shrink Tube
https://www.banggood.com/custlink/3GvmFQ3a9Q
2m×5mm x 0.2mm Solar PV Solder Ribbon Bus Bar Welding Wire Metal :
https://www.banggood.com/custlink/GGGvPsmL9T
Silicon wires:
https://www.banggood.com/custlink/3m3KHnvaOm
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: YouTube audiolibrary:
We Could Reach - Freedom Trail Studio")
