![Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting] @TinC33](https://i.ytimg.com/vi/k2a9ywCEK_A/maxresdefault.jpg)
Uploaded January 2019 | Updated September 2026, 2 weeks ago
Hy There,
I use DORMER A117 HSCO drills in this video!
In this video i'll show you how i make super small and precise lathe cutting tool, i just make a simple holder and grind broken dill bits into usefull cutting inserts
there are lot of option to grind different shape of knife by your needs, i just make a few basic one like for turning, facing, boring, internal turning and thread cutting.
i use 3.3mm drill bits so with this insert i can cut M4 internal thread.
This tool is really very usefull and alsmost free to make
Making of: Dremel / Proxxon drill holder for mini lathe
youtube.com/watch?v=1AJPM3GXaco&t
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 4 Black
Music is from NCS:
Track: Distrion & Electro-Light - Drakkar [NCS Release] Music provided by NoCopyrightSounds. Watch: youtu.be/YJTae5ScvQA Free Download / Stream: ncs.io/DrakkarYO
Hy There,
I use DORMER A117 HSCO drills in this video!
In this video i'll show you how i make super small and precise lathe cutting tool, i just make a simple holder and grind broken dill bits into usefull cutting inserts
there are lot of option to grind different shape of knife by your needs, i just make a few basic one like for turning, facing, boring, internal turning and thread cutting.
i use 3.3mm drill bits so with this insert i can cut M4 internal thread.
This tool is really very usefull and alsmost free to make
Making of: Dremel / Proxxon drill holder for mini lathe
youtube.com/watch?v=1AJPM3GXaco&t
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 4 Black
Music is from NCS:
Track: Distrion & Electro-Light - Drakkar [NCS Release] Music provided by NoCopyrightSounds. Watch: youtu.be/YJTae5ScvQA Free Download / Stream: ncs.io/DrakkarYO
![Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]](https://i.ytimg.com/vi/k2a9ywCEK_A/mqdefault.jpg "Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]
Hy There,
I use DORMER A117 HSCO drills in this video!
In this video ill show you how i make super small and precise lathe cutting tool, i just make a simple holder and grind broken dill bits into usefull cutting inserts
there are lot of option to grind different shape of knife by your needs, i just make a few basic one like for turning, facing, boring, internal turning and thread cutting.
i use 3.3mm drill bits so with this insert i can cut M4 internal thread.
This tool is really very usefull and alsmost free to make
Making of: Dremel / Proxxon drill holder for mini lathe
https://www.youtube.com/watch?v=1AJPM3GXaco&t
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tintek33_other
https://www.youtube.com/channel/UCk9akKpWakv8Gi8wyNPnPHA
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 4 Black
Music is from NCS:
Track: Distrion & Electro-Light - Drakkar [NCS Release] Music provided by NoCopyrightSounds. Watch: https://youtu.be/YJTae5ScvQA Free Download / Stream: http://ncs.io/DrakkarYO")
![NEJE Master 2 max with 30W modul 460 x 810 mm engraver / cutter [unbox / review / first test]](https://i.ytimg.com/vi/kBJLl4jsCG0/mqdefault.jpg "NEJE Master 2 max with 30W modul 460 x 810 mm engraver / cutter [unbox / review / first test]
Hy There,
In this video ill show you another laser i got from neje manufaturer to test.
I already test a few laser engravers / cutters, but that one is deffinitely another level machine.
You can buy these items here:
Neje machines on neje store:
https://shareasale.com/r.cfm?b=1634981&u=2689002&m=101855&urllink=&afftrack=717061
Different moduls from neje shop:
https://shrsl.com/2qckr
master 2 series machine and module coupon: V010WZ38E9ZN
Neje on banggood:
https://www.banggood.com/custlink/GvvRSCVoPm
Neje on gearbest:
http://gbe.st/302y62l
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Neje max:
https://www.youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
https://www.youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
https://www.youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
https://www.youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
https://www.youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
https://www.youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
https://www.youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
https://www.youtube.com/watch?v=YoYEFVLAzy0
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
GoPro 7 Black
Music is from: Epidemic Sound
1: ES_Highlander - Andre Aguado
2: ES_Democracy Manifest - Jones Meadow
3: ES_I Hear the Calling (Instrumental Version) - Wildson
4: ES_Stays the Same (Instrumental Version) - Gloria Tells")
![Making 3s [12V] 18650 protected battery pack & truth about meco 4000mAh battery](https://i.ytimg.com/vi/kDAxgpAPOAY/mqdefault.jpg "Making 3s [12V] 18650 protected battery pack & truth about meco 4000mAh battery
Hy There,
In this vido i will make a 3s (12V) battery pack out of 18650 LiIon battery cells.
I bought some cheap battery with a good 5 stars review, from banggood:
MECO 3.7v 4000mAh Protected Rechargeable 18650 Li-ion Battery
Later i figured out that that battery dont got 4000mAh of capacity as its described, but got only 1800mAh.
Each battery cell got overcharged, overdischarged and overcurrent protection inside, but i remove them because of problems i had with.
.STL files for printing the frame (housing):
https://www.thingiverse.com/thing:3716424
there is my affiliate links to that batteries if you need it anyway.
On the end its super cheap battery and its got solid 1800mAh of capacity.
2PCS MECO 3.7v 4000mAh Protected Rechargeable 18650 Li-ion Battery:
https://www.banggood.com/custlink/vGGGtN3o95
4PCS MECO 3.7v 4000mAh Protected Rechargeable 18650 Li-ion Battery:
https://www.banggood.com/custlink/3GmGtbDaii
10PCS MECO 3.7v 4000mAh Protected Rechargeable 18650 Li-ion Battery
https://www.banggood.com/custlink/mGv35s3a9l
Seiko Protection IC 10A Protection Board For 3S 11.1V 12V 12.6V 18650 Lipo Battery :
https://www.banggood.com/custlink/v3mDPnvjSe
2M PVC Heat Shrink Tubing Shrink Tube 18650 Battery Shrink Sleeve Insulation Casing Heat shrink Tube
https://www.banggood.com/custlink/3GvmFQ3a9Q
2m×5mm x 0.2mm Solar PV Solder Ribbon Bus Bar Welding Wire Metal :
https://www.banggood.com/custlink/GGGvPsmL9T
Silicon wires:
https://www.banggood.com/custlink/3m3KHnvaOm
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: YouTube audiolibrary:
We Could Reach - Freedom Trail Studio")
![Cheap portable metal bandsaw Scheppach MBS1200xts [hofer/aldi]](https://i.ytimg.com/vi/kJO9CM5l5tA/mqdefault.jpg "Cheap portable metal bandsaw Scheppach MBS1200xts [hofer/aldi]
Hy There,
In this video ill try my new cheap metal bandsaw scheppach MBS1200xts.
It had some problems but with new saw blade i ordered and some fine alighment it cut great and precize enough for home use.
More info:
https://shop.scheppach.com/metallbandsaege-mbs1200xts-scheppach-diy
Some great deals from banggood - Hobby Days
https://www.banggood.com/custlink/D3DFryw1A1
English language was always pain in the a** for me, I respect every correction, but please be gentle
Thanks for watching.
if you want to support me for more projects like this, my paypal is:
https://www.paypal.me/TinC33
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro Sigma 30 1.4]
Music is from: Epidemic sound
1: ES_Wishful - dvine
2: ES_New Tomorrow - Tape Machines
3: ES_Sepia - Phello")
![NEJE MASTER 3500 Laser Engraver [review / software / first test on different material]](https://i.ytimg.com/vi/kg6Xd4m647Y/mqdefault.jpg "NEJE MASTER 3500 Laser Engraver [review / software / first test on different material]
Hy There,
In this video i will show you my new laser engraver NEJE MASTER 3500
I think its preatty good laser engraver for the price, specially useful is CNC cutting.
More details and specifivcations you can read below.
You can buy these items here:
Neje machines on neje store:
https://shareasale.com/r.cfm?b=1634981&u=2689002&m=101855&urllink=&afftrack=717061
Different moduls from neje shop:
https://shrsl.com/2qckr
master 2 series machine and module coupon: V010WZ38E9ZN
Neje on banggood:
https://www.banggood.com/custlink/GvvRSCVoPm
Neje on gearbest:
http://gbe.st/302y62l
(this is my affiliate links, if you buy from that links you get cheaper, and I get a piece of cake)
Neje max:
https://www.youtube.com/watch?v=kBJLl4jsCG0
Neje mini:
https://www.youtube.com/watch?v=cl0_QTIEZOE
Neje vs Neje S (8vs32bit):
https://www.youtube.com/watch?v=ZO2xUnOoJm4
Neje master 1:
https://www.youtube.com/watch?v=kg6Xd4m647Y
Ortur master:
https://www.youtube.com/watch?v=cMxQ73jwAAY&t
Neje 20W laser modul:
https://www.youtube.com/watch?v=Hvg8slOVSyE&t
Ortur upgrade:
https://www.youtube.com/watch?v=QjyQ0i580LQ&
Insma laser:
https://www.youtube.com/watch?v=YoYEFVLAzy0
NEJE MASTER 3500mW
https://www.banggood.com/custlink/mvKGbOefUu
NEJE MASTER 7W
https://www.banggood.com/custlink/GmGGNL4fMH
NEJE MASTER 20W
for great price with a coupon:
Coupon Price:$209.9
Code:BG82758
https://www.banggood.com/custlink/GvGvkRnDRU
coupon code: BGNEJE58
Exp. 05.31
https://www.banggood.com/custlink/3vmvU0fthI
NEJE 20 laser modul
US$124.99
https://www.banggood.com/custlink/GG3GU6fVdb
coupon code: BG6845
Coupon Price: 15%off
Exp.4.30
Neje is out of stock in gearbest so here is the link to differend brand one, but its almost same machine, just a bit cheaper and more powerfull 7 or 15W:
https://www.gearbest.com/laser-engraving-machine/pp_009731781853.html?wid=1433363&lkid=75783695
Coupon: KRCP0615
Specification
Material: Acrylic + aluminum + stainless steel
Laser Power: 3500mW ( input: 12V 3A )
Laser Wave Length: 405nm
Image Format: nc / dxf / bmp / jpg / png etc.
Image Size: 2000 x 2000 pixels / 0.075mm point distance
Support System: Win7 / Win8 / XP / Win10, Android APP( NEJE scanner )
Supply Voltage: 12V 2A
Items can be carved including mahogany, bamboo, paper cards, ivory, leather, flammable plastic, PCBA, etc. please take notice that the laser head is easily-consumed products
General:
Brand: NEJE
Type: Aurora engraving machine
Material: Profile / metal
Laser Power: 3500mW
Laser Reaching Range: 5-50mm
Power By: AC Power
Dimensions and Weight:
Product weight: 1.3000 kg
Package weight: 1.9000 kg
Product size (L x W x H): 38.00 x 28.00 x 13.00 cm / 14.96 x 11.02 x 5.12 inches
Package size (L x W x H): 44.00 x 27.00 x 12.00 cm / 17.32 x 10.63 x 4.72 inches
Package Contents:
Package Contents: 1 x Engraving Machine , 1 x Pair of Protective Glasses, 1 x USB Cable, 1 x Power Adapter, 1 x Wrench, 1 x Whiteboard Marker, 2 x Wood Block , 2 x Paper
English language was always pain in the a** for me, I respect every correction, but please be gentle.
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
https://www.youtube.com/channel/UCNwj7T3yDfUbmARRHERF8QA
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 (sel 18-200 f3,5-5,6 Zeiss touit 50 2.8 macro)
Sony A6000 (sel 30 f3.5macro Sigma 30 1.4)
GoPro 7 Black
Music is from: YouTube audiolibrary:
At The Game - Max McFerren")
![How i make rotatable base [rotary table] for milling vice 360°](https://i.ytimg.com/vi/lDnihonia_E/mqdefault.jpg "How i make rotatable base [rotary table] for milling vice 360°
Many times i need to set my vice at some angle, but doing it direct on a table is It is a difficult and imprecise process.
So i start thinking how to make someetking like rottary table and heave degree scale on it.
I make is as simply as possible, but the gadget is tottaly worked and im happy with it.
You just need to use some common sense not to overreact with load on it.")
