Uploaded December 2025 | Updated November 2026, 5 days ago
Milos rebuilds his old Smart Cookie Jar project using modern parts, a compact 3D-printed locking mechanism, and an ESP32 connected to Strava. The jar stays locked until you complete your chosen running distance, turning your workout into a reward you actually have to earn. In the video he walks through the updated mechanism, the ESP32/Strava integration, and a real test run to prove it works—all while keeping the jar looking like an ordinary container of treats! bit.ly/4oRCJyx
#ESP32 #StravaAPI #3dprinting
[02:03]-The Plan
[03:46]-Locking Mechanism
[06:03]-Software
[09:48]-Assembly
[11:37]-The Dem-Ho-Ho-Ho
Check out the element14 Community Holiday competition here: bit.ly/48Htxbz
=================================================================================
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY
Milos rebuilds his old Smart Cookie Jar project using modern parts, a compact 3D-printed locking mechanism, and an ESP32 connected to Strava. The jar stays locked until you complete your chosen running distance, turning your workout into a reward you actually have to earn. In the video he walks through the updated mechanism, the ESP32/Strava integration, and a real test run to prove it works—all while keeping the jar looking like an ordinary container of treats! bit.ly/4oRCJyx
#ESP32 #StravaAPI #3dprinting
[02:03]-The Plan
[03:46]-Locking Mechanism
[06:03]-Software
[09:48]-Assembly
[11:37]-The Dem-Ho-Ho-Ho
Check out the element14 Community Holiday competition here: bit.ly/48Htxbz
=================================================================================
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY
![Build a Raspberry Pi voice-locked safe box!
Lorraine builds a voice-locked prize box using a Raspberry Pi, servo, microphone and voice recognition. A hands-on project exploring voice authentication, hardware design, and how easy these systems are to break: https://bit.ly/4qi0bWu
#RaspberryPi #VoiceRecognition #cybersecurity
[01:39]-The Plan
[04:58]-Equipment
[08:27]-Microphone and sound
[10:02]-Installing the screen and servo
[12:42]-Comparing audio files
[15:32]-Assembling the box
[18:00]-The Demo
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Build a Raspberry Pi voice-locked safe box!](https://i.ytimg.com/vi/Fkb91AogoDg/mqdefault.jpg)



![DIY ESP32 Heart Rate Monitor!
Follow Milos as he builds a DIY ECG based heart rate chest strap using an AD8232 module and an ESP32 C3, then tests it during a real run to compare its performance with common fitness tracking gear. He walks through the signal capture process, explains how the Pan Tompkins algorithm detects heartbeats and shows how the device streams data to a phone over BLE just like a commercial sensor. The project explores what works, where the readings drift and what he plans to improve in the next version: https://bit.ly/48BOmEW
#ECGTracker #ESP32Build #wearabletech
[01:16]- Chest Strap Sensor Design
[03:38]- Recording ECG Data
[05:26]- Pan-Tompkins Algorithm
[09:10]- Implementing the Algorithm
[16:00]- Electronics
[17:17]- Mechanics
[18:27]- Assembly
[18:41]- Finished Project
[19:20]- Lets Go For a Run
[21:08]- Analyzing the Result
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY DIY ESP32 Heart Rate Monitor!](https://i.ytimg.com/vi/G_fZE37eAog/mqdefault.jpg)





![Home‑Built EMI Mapper! Visualize EMI Hotspots!
In this element14 presents episode, Clem builds an automated CNC style EMI heatmapping scanner to remove guesswork from near field probing during pre compliance testing. Using an Arduino Uno with GRBL, professional near field probes, and a low cost RTL SDR, the system scans a PCB in a controlled grid and turns raw measurements into clear EMI heatmaps. Along the way, Clem highlights real engineering challenges, including firmware choices, SDR software limitations, and the critical importance of lowering the noise floor through proper shielding, showing how automation and good measurement practice work together, and you can find the supporting files on the element14 Community: https://bit.ly/4d5TYty
#emidebugging #emctesting #hardwareengineering
[04:01]-Buy it or build it?
[05:09]-The Theory
[09:59]-The Code
[16:47]-Cut the Noise
[24:53]-Making some measurements
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Home‑Built EMI Mapper! Visualize EMI Hotspots!](https://i.ytimg.com/vi/HaZoxM82cWM/mqdefault.jpg)