Uploaded May 2024 | Updated November 2026, 5 days ago
Click, snap, done! :) Making a DIY Soldering Hot Plate in 35 seconds...Kind of! Watch the full project video here: youtu.be/pVeknb0dz6A
Read the full project blog on the element14 Community: bit.ly/4dLrzHo
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY
Click, snap, done! :) Making a DIY Soldering Hot Plate in 35 seconds...Kind of! Watch the full project video here: youtu.be/pVeknb0dz6A
Read the full project blog on the element14 Community: bit.ly/4dLrzHo
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY


![Home‑Built EMI Mapper! Visualize EMI Hotspots!
In this element14 presents episode, Clem builds an automated CNC style EMI heatmapping scanner to remove guesswork from near field probing during pre compliance testing. Using an Arduino Uno with GRBL, professional near field probes, and a low cost RTL SDR, the system scans a PCB in a controlled grid and turns raw measurements into clear EMI heatmaps. Along the way, Clem highlights real engineering challenges, including firmware choices, SDR software limitations, and the critical importance of lowering the noise floor through proper shielding, showing how automation and good measurement practice work together, and you can find the supporting files on the element14 Community: https://bit.ly/4d5TYty
#emidebugging #emctesting #hardwareengineering
[04:01]-Buy it or build it?
[05:09]-The Theory
[09:59]-The Code
[16:47]-Cut the Noise
[24:53]-Making some measurements
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Home‑Built EMI Mapper! Visualize EMI Hotspots!](https://i.ytimg.com/vi/HaZoxM82cWM/mqdefault.jpg)
![Fort VOX: A Raspberry Pi Voice Locked Box You Can Try to Hack
Lorraine builds a voice-locked prize box using a Raspberry Pi, servo, microphone and voice recognition. A hands-on project exploring voice authentication, hardware design, and how easy these systems are to break: https://bit.ly/4qi0bWu
#RaspberryPi #VoiceRecognition #cybersecurity
[01:39]-The Plan
[04:58]-Equipment
[08:27]-Microphone and sound
[10:02]-Installing the screen and servo
[12:42]-Comparing audio files
[15:32]-Assembling the box
[18:00]-The Demo
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Fort VOX: A Raspberry Pi Voice Locked Box You Can Try to Hack](https://i.ytimg.com/vi/HnVyIX9bDVc/mqdefault.jpg)






