Uploaded October 2026 | Updated November 2026, 5 days ago
A stubborn logic-level problem inspired Clem to build his own modular lab equipment. His Analog Bridge combines 32 channels of analogue measurement with Ethernet, USB, SCPI control and Python software, creating a versatile logic monitor and seriously slow oscilloscope for tracking down tricky electronics faults. See how it works, where its limitations lie, and how it can help hunt down problems across an entire signal chain, and you can find the supporting files on the element14 Community: bit.ly/4eDc4TV
#diyelectronics #testandmeasurement #dataacquisition
00:00-Intro
01:22-How Low Can You Go?
02:13-Getting your Input
03:08-The PCB
06:39-Give it brains!
08:40-Isolation across the nation
10:02-Talk to me
11:19-Into the code void!
14:20-Demo
===========================================================================
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY
A stubborn logic-level problem inspired Clem to build his own modular lab equipment. His Analog Bridge combines 32 channels of analogue measurement with Ethernet, USB, SCPI control and Python software, creating a versatile logic monitor and seriously slow oscilloscope for tracking down tricky electronics faults. See how it works, where its limitations lie, and how it can help hunt down problems across an entire signal chain, and you can find the supporting files on the element14 Community: bit.ly/4eDc4TV
#diyelectronics #testandmeasurement #dataacquisition
00:00-Intro
01:22-How Low Can You Go?
02:13-Getting your Input
03:08-The PCB
06:39-Give it brains!
08:40-Isolation across the nation
10:02-Talk to me
11:19-Into the code void!
14:20-Demo
===========================================================================
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY

![Get GPIO on Laptops and Desktop!
In this project, Clem builds GimmeGPIO, a compact USB-to-GPIO board that brings Raspberry Pi–style GPIO to almost any computer. Using an ESP32-S2 and a Pi-compatible header, the board lets laptops, desktops, and even older machines interact with real-world hardware over USB. Clem walks through the hardware design, thin PCB choices, firmware approach, and Python control, showing how GPIO, PWM, I2C, and serial can be added without relying on a Raspberry Pi: https://bit.ly/45z5t8H
#GPIOProjects #ESP32 #MakerElectronics
[01:52]-Bridge the Gap
[03:24]-The Plan!
[05:18]-Just In Case
[06:26]-The Code
[08:51]-The Demo
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Get GPIO on Laptops and Desktop!](https://i.ytimg.com/vi/JHIUpRVOnMs/mqdefault.jpg)


![Blooper USB Looper: Lets You Hack Serial Like It’s 1999!
Clem introduces the Blooper USB Looper, a modern null-modem style tool for UART debugging, device emulation and file transfer without a network. See how it logs serial data, enables full-duplex chat between computers, and safely connects two USB hosts
You can find the supporting files and guide here: https://bit.ly/4aJ9jOj
#UARTDebugging #USBProjects #EmbeddedDevelopment
[03:11]-How it Works
[06:43]-The Schematics
[09:48]-Assembly
[11:37]-Transferring Files
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Blooper USB Looper: Lets You Hack Serial Like It’s 1999!](https://i.ytimg.com/vi/JvRbdxplits/mqdefault.jpg)
![Raspberry Pi & Node-RED Smart 3D Printer Cabinet
In this project, Milos builds a mobile smart cabinet for his 3D printer, filament dryer, tools, and filament storage, combining workshop organisation with safety and monitoring. The cabinet uses a Raspberry Pi and Raspberry Pi Pico to control relays, measure power consumption with current transformers, and monitor temperature and humidity using DHT22 sensors. All data is published over MQTT and visualised in a Node-RED dashboard, with remote power control and live camera monitoring. The result is a practical upgrade for any 3D printing workspace, showing how electronics, software, and physical design can come together to create a safer and more controlled printing setup: https://bit.ly/45a7M1I
#3DPrinterProjects #RaspberryPi #SmartWorkshop
[03:05] - Lets Make the Cabinet!
[05:18] - Time to Make It Smart!
[06:26] - Electronics
[10:52] - Software
[13:12] - Bench Test
[15:33] - Final Assembly
[16:54] - The Project is Complete!
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Raspberry Pi & Node-RED Smart 3D Printer Cabinet](https://i.ytimg.com/vi/JwlMXySHn3A/mqdefault.jpg)

![Open Source ATtiny3226 Arduino Calculator – Hardware, Case & Code Build
Clem AKA @MAYERMAKES builds a fully open-source, battery-powered desktop calculator from scratch, powered by an ATtiny3226 microcontroller for efficient 3V operation. It features a 20x4 FORDATA LCD, Cherry MX key switches, and a custom PCB designed for matrix scanning with N-key rollover. The case combines a repurposed Multicomp Pro die-cast aluminum lid with 3D-printed PETG panels and keycaps. Programmed in Arduino using the Adafruit Keypad and LiquidCrystal libraries, the code handles basic four-function math while showing the limits of an 8-bit system. All design files and source code are free to download for modification: https://bit.ly/4lsGIAc
[06:33] Schematic
[10:32] The PCB
[12:33] Populating the PCB
[13:33] Assembly
[15:41] The Code
[18:35] Finishing Touches
[23:43] Conclusion
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Open Source ATtiny3226 Arduino Calculator – Hardware, Case & Code Build](https://i.ytimg.com/vi/KFSGVxwPFHE/mqdefault.jpg)
![Build a Larson Scanner with Sound Using an ESP32
Mark builds a customizable Larson scanner using an ESP32, complete with synchronized Cylon-inspired sound effects. The project supports 12 to 50 WS2812 LEDs and uses four potentiometers to adjust brightness, speed, tail length, and LED count. Sound is driven by an I2S audio board and a surface-mounted speaker. It’s all powered via USB and programmed easily through a browser—no Arduino IDE needed. Perfect for cosplay, props, or unique lighting effects. Full build details and code available on the element14 Community: https://bit.ly/446E4cJ
#ESP32Project #DIYElectronics #LarsonScanner
[00:58]-Project Schematics and Parts
[03:49]-Assembly
[06:38]-Code Upload and Demo!
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Build a Larson Scanner with Sound Using an ESP32](https://i.ytimg.com/vi/KVDzL0d0sw8/mqdefault.jpg)

