Uploaded February 2026 | Updated November 2026, 5 days ago
In this project, Clem builds GimmeGPIO, a compact USB-to-GPIO board that brings Raspberry Pi–style GPIO to almost any computer. Using an ESP32-S2 and a Pi-compatible header, the board lets laptops, desktops, and even older machines interact with real-world hardware over USB. Clem walks through the hardware design, thin PCB choices, firmware approach, and Python control, showing how GPIO, PWM, I2C, and serial can be added without relying on a Raspberry Pi: bit.ly/45z5t8H
#GPIOProjects #ESP32 #MakerElectronics
[01:52]-Bridge the Gap
[03:24]-The Plan!
[05:18]-Just In Case
[06:26]-The Code
[08:51]-The Demo
=================================================================================
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY
In this project, Clem builds GimmeGPIO, a compact USB-to-GPIO board that brings Raspberry Pi–style GPIO to almost any computer. Using an ESP32-S2 and a Pi-compatible header, the board lets laptops, desktops, and even older machines interact with real-world hardware over USB. Clem walks through the hardware design, thin PCB choices, firmware approach, and Python control, showing how GPIO, PWM, I2C, and serial can be added without relying on a Raspberry Pi: bit.ly/45z5t8H
#GPIOProjects #ESP32 #MakerElectronics
[01:52]-Bridge the Gap
[03:24]-The Plan!
[05:18]-Just In Case
[06:26]-The Code
[08:51]-The Demo
=================================================================================
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: bit.ly/3qPrDhM
RoadTest and Reviews: bit.ly/3pV5Bux
Project14: bit.ly/31wbnJY


![Blooper USB Looper: Lets You Hack Serial Like It’s 1999!
Clem introduces the Blooper USB Looper, a modern null-modem style tool for UART debugging, device emulation and file transfer without a network. See how it logs serial data, enables full-duplex chat between computers, and safely connects two USB hosts
You can find the supporting files and guide here: https://bit.ly/4aJ9jOj
#UARTDebugging #USBProjects #EmbeddedDevelopment
[03:11]-How it Works
[06:43]-The Schematics
[09:48]-Assembly
[11:37]-Transferring Files
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Blooper USB Looper: Lets You Hack Serial Like It’s 1999!](https://i.ytimg.com/vi/JvRbdxplits/mqdefault.jpg)
![Raspberry Pi & Node-RED Smart 3D Printer Cabinet
In this project, Milos builds a mobile smart cabinet for his 3D printer, filament dryer, tools, and filament storage, combining workshop organisation with safety and monitoring. The cabinet uses a Raspberry Pi and Raspberry Pi Pico to control relays, measure power consumption with current transformers, and monitor temperature and humidity using DHT22 sensors. All data is published over MQTT and visualised in a Node-RED dashboard, with remote power control and live camera monitoring. The result is a practical upgrade for any 3D printing workspace, showing how electronics, software, and physical design can come together to create a safer and more controlled printing setup: https://bit.ly/45a7M1I
#3DPrinterProjects #RaspberryPi #SmartWorkshop
[03:05] - Lets Make the Cabinet!
[05:18] - Time to Make It Smart!
[06:26] - Electronics
[10:52] - Software
[13:12] - Bench Test
[15:33] - Final Assembly
[16:54] - The Project is Complete!
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Raspberry Pi & Node-RED Smart 3D Printer Cabinet](https://i.ytimg.com/vi/JwlMXySHn3A/mqdefault.jpg)

![Open Source ATtiny3226 Arduino Calculator – Hardware, Case & Code Build
Clem AKA @MAYERMAKES builds a fully open-source, battery-powered desktop calculator from scratch, powered by an ATtiny3226 microcontroller for efficient 3V operation. It features a 20x4 FORDATA LCD, Cherry MX key switches, and a custom PCB designed for matrix scanning with N-key rollover. The case combines a repurposed Multicomp Pro die-cast aluminum lid with 3D-printed PETG panels and keycaps. Programmed in Arduino using the Adafruit Keypad and LiquidCrystal libraries, the code handles basic four-function math while showing the limits of an 8-bit system. All design files and source code are free to download for modification: https://bit.ly/4lsGIAc
[06:33] Schematic
[10:32] The PCB
[12:33] Populating the PCB
[13:33] Assembly
[15:41] The Code
[18:35] Finishing Touches
[23:43] Conclusion
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Open Source ATtiny3226 Arduino Calculator – Hardware, Case & Code Build](https://i.ytimg.com/vi/KFSGVxwPFHE/mqdefault.jpg)
![Build a Larson Scanner with Sound Using an ESP32
Mark builds a customizable Larson scanner using an ESP32, complete with synchronized Cylon-inspired sound effects. The project supports 12 to 50 WS2812 LEDs and uses four potentiometers to adjust brightness, speed, tail length, and LED count. Sound is driven by an I2S audio board and a surface-mounted speaker. It’s all powered via USB and programmed easily through a browser—no Arduino IDE needed. Perfect for cosplay, props, or unique lighting effects. Full build details and code available on the element14 Community: https://bit.ly/446E4cJ
#ESP32Project #DIYElectronics #LarsonScanner
[00:58]-Project Schematics and Parts
[03:49]-Assembly
[06:38]-Code Upload and Demo!
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Build a Larson Scanner with Sound Using an ESP32](https://i.ytimg.com/vi/KVDzL0d0sw8/mqdefault.jpg)


![Find Gold with a ESP32 - 3D Printed Pulse Induction Metal Detector
In this video, Mark Donners takes you through the full build of a DIY pulse induction metal detector and explains the principles behind how it detects metal. He covers the electronics design, coil winding and shielding, and how an ESP32 is used to generate pulses, analyse the return signal, and provide audio and visual feedback. The project is designed to be adjustable and extensible, allowing you to tune detection behavior and explore how different parameters affect performance. Mark also shares practical insights from building and testing the detector, making the video useful for anyone interested in metal detection or hands-on electronics: https://bit.ly/49niZ05
#PulseInductionMetalDetector, #DIYMetalDetector, #esp32projects
[02:23]-PCB Assembly
[04:47]-The Coils
[09:45]-Connecting the Coils
[11:05]-Vibecoding
[15:34]-The Demo
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY Find Gold with a ESP32 - 3D Printed Pulse Induction Metal Detector](https://i.ytimg.com/vi/LAtnEHNkjJ4/mqdefault.jpg)
![PID Controllers & ROS on Raspberry Pi for Beginners – PlatypusBot Upgrade
In this episode, Milos upgrades his open-source PlatypusBot into Perry the PlatypusBot, transforming a simple Arduino-based rover into a full ROS2-powered robotics platform. He explains how the motor encoders work, implements PID control for precise movement, and connects an Arduino Uno R4 WiFi to a Raspberry Pi 4B running ROS2 Humble for real-time command and control. With a 3D-printed fedora and a name inspired by community feedback, Perry now moves, turns, and responds to ROS commands, laying the groundwork for future additions like sensors, LIDAR, and SLAM: https://bit.ly/4hXD40Z
#ArduinoRobotics #RaspberryPiProjects #DIYRobotBuild
[01:24]-Inspecting the Motor
[06:52]-Electronics
[08:45]-PID Controllers
[12:48]-Arduino IDE
[18:01]-Robot Operating System-ROS
[23:49]-Programming in ROS2
[31:52]-Meet Perry the PlatyousBot!
[32:37]-Testing
Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware:
Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY PID Controllers & ROS on Raspberry Pi for Beginners – PlatypusBot Upgrade](https://i.ytimg.com/vi/Lh4VZpy7In4/mqdefault.jpg)