Uploaded April 2026 | Updated November 2026, 5 hours ago
Have you ever wondered if you could make your brewing experience more precise and replicable? Can you be more scientific about your brewing? These questions and thoughts were raised after we encountered an interesting argument about something else.
After some examination the answer was obvious. Yes you can but it is a lot of work and probably not worth the effort in most home brewing scenarios. In a commercial setting it is very much worth the effort for consistency at scale.
The first issue is that brewing can be scientific. In fact most malts and especially base malts are measured by the producer to give a general idea of the content. The protein, the saccharides, and the lipids. However it is a general idea not the specific content.
For your average home brewer this is good enough. You have enough information to make the right recipe to make your desired beer. Close enough is good enough.
Further there is always variability in your ingredients. It is just part of being a naturally produced product with no way to ensure specific concentrations of anything. Whether it is barley, hops, ort yeast function.
This is where we can talk about the science. The biochemistry in particular. Biochemistry is all about hexagons and especially, in this case, where we are talking about turning saccharides, alpha acids, and more into ethanol, other saccharides, and iso alpha acids.
However you can’t measure the amount going into the reaction. You can’t exactly measure the amount coming out as a product fo the reaction. You describe the outcome you experience as taste, aroma and so on.
This is why you are trying to approximate the amounts needed. This is done with the ingredients. You use so many grams, kilograms, ounces, or pounds per a litre or so many parts per a million or billion. The problem is that so many units is only the whole ingredient no the specific components of complex ingredients.
By contrast a laboratory or similar can use a stock solution. That is a solution that you make of either pure or at least made up of individually measured components of the final solution. This way you know exactly how much of each part goes in exactly. They can be scientific.
The difference is for commercial breweries. They do have the option of measuring everything. Both before and after brewing. This is essential for consistent commercial production.
As a home brewer you can see the difference if you compare moonshine fermentation and beer fermentation. You can measure the change in gravity of both. However you can explicitly measure the moonshine alcohol production and backwards calculate the efficiency of the reaction. You can’t do the same for beer exactly the same. You can use specific gravity for both and get an idea but not specificity.
Have you ever wondered if you could make your brewing experience more precise and replicable? Can you be more scientific about your brewing? These questions and thoughts were raised after we encountered an interesting argument about something else.
After some examination the answer was obvious. Yes you can but it is a lot of work and probably not worth the effort in most home brewing scenarios. In a commercial setting it is very much worth the effort for consistency at scale.
The first issue is that brewing can be scientific. In fact most malts and especially base malts are measured by the producer to give a general idea of the content. The protein, the saccharides, and the lipids. However it is a general idea not the specific content.
For your average home brewer this is good enough. You have enough information to make the right recipe to make your desired beer. Close enough is good enough.
Further there is always variability in your ingredients. It is just part of being a naturally produced product with no way to ensure specific concentrations of anything. Whether it is barley, hops, ort yeast function.
This is where we can talk about the science. The biochemistry in particular. Biochemistry is all about hexagons and especially, in this case, where we are talking about turning saccharides, alpha acids, and more into ethanol, other saccharides, and iso alpha acids.
However you can’t measure the amount going into the reaction. You can’t exactly measure the amount coming out as a product fo the reaction. You describe the outcome you experience as taste, aroma and so on.
This is why you are trying to approximate the amounts needed. This is done with the ingredients. You use so many grams, kilograms, ounces, or pounds per a litre or so many parts per a million or billion. The problem is that so many units is only the whole ingredient no the specific components of complex ingredients.
By contrast a laboratory or similar can use a stock solution. That is a solution that you make of either pure or at least made up of individually measured components of the final solution. This way you know exactly how much of each part goes in exactly. They can be scientific.
The difference is for commercial breweries. They do have the option of measuring everything. Both before and after brewing. This is essential for consistent commercial production.
As a home brewer you can see the difference if you compare moonshine fermentation and beer fermentation. You can measure the change in gravity of both. However you can explicitly measure the moonshine alcohol production and backwards calculate the efficiency of the reaction. You can’t do the same for beer exactly the same. You can use specific gravity for both and get an idea but not specificity.










