Uploaded June 2026 | Updated November 2026, 5 hours ago
Are you looking to buy brewing equipment? Maybe you are thinking about expanding or upgrading your brewing equipment. What about changing your equipment after hearing or reading about the benefits or demerits of certain materials?
This brings the two common options for home brewing. Glass and plastic. Yes, as you get more equipment and experience you may begin to acquire steel tools and equipment but this tends be much larger and not as suitable for home brewing without dedicated space.
For that reason we will focus on comparing and contrasting glass and plastic equipment.
As a broad rule there are 2 kinds of plastic safe and suitable for food. High density Polyethylene or HDPE. The other is PET or polyethylene terephthalate. Glass is not generally specified but if you have the option buy borosilicate glass as it is much more shock, temperature and generally wear resistant.
This last point is a double edged issue. Glass will last for almost forever if you care for the equipment. However glass is notorious for being fragile in terms of being chock sensitive. If the glass is dropped it will shatter. Sudden temperature changes can do the same. So can pressure if you are bottling.
By contrast plastic has a reasonably finite life. Not exactly fast consumption or wear but quick enough by comparison to glass that it is a sort of consumable. Plastic also tends to be much less vulnerable to dropping and being shattered. However plastic is still somewhat susceptible to heat where it can melt, deform, and crack.
In more specific terms we have oxygen. Glass is impermeable. It is that simple. Plastic is not impermeable but its not exactly a quick leak either.
Cleaning is easier for glass so long as you take care. You can’t easily scratch glass but you can cause it to crack with hot water. Plastic is less of a problem when it comes to heat as any water hot enough to clean with is also cool enough not to effect your plastic equipment. However plastic will scratch.
In terms of visibility glass is nearly always clear as, well, glass. That is 100 percent transparency. Plastic varies. HDPE tends to be opaque and therefore visibility is low. You can generally identify the volume filled and vague colour but it is blurry. PET is nearly always as clear as glass but can become slightly opaque over time. However it is a long term problem.
Cost is a reasonable factor to consider. Glass is nearly always the most expensive. A lot of the cost is from the bulk and weight of glass. Shipping is expensive and most of the glass equipment can’t be easily shipped in bulk. Combine this with the cost of casting and similar for glass production and glass is just much more expensive.
PET and HDPE can shipped much more cheaply. It is also cheaper to produce once large scale production is set up. Further shipping is easier as it is lighter and able to moved in greater bulk while taking up only a fraction of the space. This makes HDPE and PET much cheaper over all.
To be clear both work and have a place. Neither is exactly better than the other. They just have specific places.
Are you looking to buy brewing equipment? Maybe you are thinking about expanding or upgrading your brewing equipment. What about changing your equipment after hearing or reading about the benefits or demerits of certain materials?
This brings the two common options for home brewing. Glass and plastic. Yes, as you get more equipment and experience you may begin to acquire steel tools and equipment but this tends be much larger and not as suitable for home brewing without dedicated space.
For that reason we will focus on comparing and contrasting glass and plastic equipment.
As a broad rule there are 2 kinds of plastic safe and suitable for food. High density Polyethylene or HDPE. The other is PET or polyethylene terephthalate. Glass is not generally specified but if you have the option buy borosilicate glass as it is much more shock, temperature and generally wear resistant.
This last point is a double edged issue. Glass will last for almost forever if you care for the equipment. However glass is notorious for being fragile in terms of being chock sensitive. If the glass is dropped it will shatter. Sudden temperature changes can do the same. So can pressure if you are bottling.
By contrast plastic has a reasonably finite life. Not exactly fast consumption or wear but quick enough by comparison to glass that it is a sort of consumable. Plastic also tends to be much less vulnerable to dropping and being shattered. However plastic is still somewhat susceptible to heat where it can melt, deform, and crack.
In more specific terms we have oxygen. Glass is impermeable. It is that simple. Plastic is not impermeable but its not exactly a quick leak either.
Cleaning is easier for glass so long as you take care. You can’t easily scratch glass but you can cause it to crack with hot water. Plastic is less of a problem when it comes to heat as any water hot enough to clean with is also cool enough not to effect your plastic equipment. However plastic will scratch.
In terms of visibility glass is nearly always clear as, well, glass. That is 100 percent transparency. Plastic varies. HDPE tends to be opaque and therefore visibility is low. You can generally identify the volume filled and vague colour but it is blurry. PET is nearly always as clear as glass but can become slightly opaque over time. However it is a long term problem.
Cost is a reasonable factor to consider. Glass is nearly always the most expensive. A lot of the cost is from the bulk and weight of glass. Shipping is expensive and most of the glass equipment can’t be easily shipped in bulk. Combine this with the cost of casting and similar for glass production and glass is just much more expensive.
PET and HDPE can shipped much more cheaply. It is also cheaper to produce once large scale production is set up. Further shipping is easier as it is lighter and able to moved in greater bulk while taking up only a fraction of the space. This makes HDPE and PET much cheaper over all.
To be clear both work and have a place. Neither is exactly better than the other. They just have specific places.










