Which chips are required for a Mac SE/30 to chime? And socketing PLCC chips for ease of testing. @BigBadBench
Which chips are required for a Mac SE/30 to chime? And socketing PLCC chips for ease of testing.  @BigBadBench
Uploaded February 2026 | Updated November 2026, 5 days ago
I've realized that I need to test some 44 pin PLCC chips on the Macintosh SE/30 logic board. To make this a lot easier, I'm going to socket them on a perfectly functional logic board, so I will show how to solder SMT PLCC sockets. Will I break the board with this process? Let's find out!

Also, I've seen various sources be a little bit conflicting about which chips are actually required for the SE/30 to chime (or POST), so let's use this as an opportunity to document what happens when various chips are missing. I'll update this list with the details after the stream:
UL11 / ADB- chime, hangs at 50% gray (square corners), no cursor
UK11 / VIA1- simasima with additional box behind, long sad chime, cannot see serial diagnostic mode with programmer button
UK12 / VIA2- simasima with additional box behind, long sad chime, cannot see serial diagnostic mode with programmer button
UJ11 / SWIM- no chime. can hit programmer button to get sad chime and enter diagnostic mode
UG12 / 8530- POST OK, hangs during boot, mouse continues to work
UI12 / SCSI- chime, never shows flashing floppy ?, mouse still works

A resource that I've been working on is resistance to ground across locations on the board to help find bad traces. I also have some descriptions of a few chips and my chip missing list:
docs.google.com/spreadsheets/d/1jFDK_Yzj62SN0ryXWI8Pn2e7W7mXbAlXPBLx0CP8s1s/edit?usp=sharing

Mastodon: @bigbadbiologist@bitbang.social
BlueSky: https://bsky.app/profile/bigbadbiologist.bsky.social
Instagram: instagram.com/bigbadbench
Patreon: patreon.com/c/BigBadBench
Which chips are required for a Mac SE/30 to chime? And socketing PLCC chips for ease of testing.Rebuilding a restored Mac Plus, overclocking it, and giving it away!Recapping a Macintosh LCIII- Another one saved? #vintagemacintoshUpgrading my 486 test bench with a VESA Local Bus slot mobo and testing some cards from MIT SwapfestThe Macintosh Centris 610 board (death) chimes! #vintagemacintosh #vintagecomputingDocumenting resistors under the Kingston TurboChip 486 upgrade processor #retrocomputing #vintagepcA major sign of life with @iiidiy ’s Cursed LC575- video! #vintagemacintosh #marchintoshTrying to overclock a G3 upgrade for the Power Macintosh 6100What is inside this clear Sun SPARCstation LX? Disassembly, BlueSCSI hard drive backup, PSU recapThis is my first time exhibiting at #VCFEast. I couldn’t fit as much as I wanted #vintagecomputingBuilding and testing Keros Mac Mods new SPIISD V2 (Smartport to SD card) and new to me Apple IIcAttempting repair of an Atari MEGA ST2 setup with no red appearing in the SC 1224 monitor
BigBadBench |

Which chips are required for a Mac SE/30 to chime? And socketing PLCC chips for ease of testing.

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER