Documenting resistors under the Kingston TurboChip 486 upgrade processor #retrocomputing #vintagepc @BigBadBench
Documenting resistors under the Kingston TurboChip 486 upgrade processor #retrocomputing #vintagepc  @BigBadBench
Uploaded July 2026 | Updated November 2026, 5 days ago
It turns out you can get a good bit more performance out of these Kingston TurboChip CPUs by moving resistors.
R10 to R8 improves L1 cache performance
R9 to R6 changes the multiplier from 4x to 3x so you can use a faster front side bus.

I wasn't able to see any difference moving R12 to R11

Link to my 486 benchmarking spreadsheet:
docs.google.com/spreadsheets/d/1sj-yj_RbZgG5HgLiv1XzrOL6AS3wHiBjNEMcp_3HP5c/edit?usp=sharing
Documenting resistors under the Kingston TurboChip 486 upgrade processor #retrocomputing #vintagepcA major sign of life with @iiidiy ’s Cursed LC575- video! #vintagemacintosh #marchintoshTrying to overclock a G3 upgrade for the Power Macintosh 6100What is inside this clear Sun SPARCstation LX? Disassembly, BlueSCSI hard drive backup, PSU recapThis is my first time exhibiting at #VCFEast. I couldn’t fit as much as I wanted #vintagecomputingBuilding and testing Keros Mac Mods new SPIISD V2 (Smartport to SD card) and new to me Apple IIcAttempting repair of an Atari MEGA ST2 setup with no red appearing in the SC 1224 monitorThe moldiest vintage computer haul that I’ve ever gotten with two sad IBM PS/2s (50z and 60) and 486I just got a TRS80 Model II. Will it boot before the end of #septandy ? #vintagecomputingRecapping my Mac Quadra 950 video editing rig power supply & checking out a nasty Quadra 840AVWill the ewaste Mac LC network work after adding a factory bodge? #vintagecomputing #vintagemac#doscember Working on a Power Macintosh 6100 DOS Compatible
BigBadBench |

Documenting resistors under the Kingston TurboChip 486 upgrade processor #retrocomputing #vintagepc

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER