Uploaded April 2025 | Updated September 2026, 3 weeks ago

---

The Gantry Standoff must be welding to the gantry tube. I positioned the standoff directly in the center and clamped it down with my C-Clamp. The tubing is 11ga 0.120 inch wall thickness. I used my Lincoln Electric 210MP in MIG to weld it together. I didn't take my time on this weld and basically just used it as metallic glue. This will not be under a lot of force during operation.

Video Credits:
Video Production: U Do It™️ Studios a Division of No Cheese Records LLC All Rights Reserved. No Cheese Records® is a Registered Trademark of No Cheese Records LLC All Rights Reserved.

#welding #plasmacutter