Uploaded June 2022 | Updated November 2026, 1 day ago
Calderwood Shop Day - 17 June 2022
Back after being absent for 2 weekends due to a large HVAC project, I try to salvage hoop finish, but fail.
Bill fabricates some carry loop bushings while I rope two drums, which then get pressed and gut snares installed.
Work starts on a project for Woodshed Stage Art with a tight deadline - 15 wall hanger/trophies.
We also batch out 18 shell blanks for what will become brocade piccolo snares. I plan to make as many as possible before PASIC in November, but part availability will be the limiting factor.
Anyone And Their Mother Share
youtube.com/watch?v=kJX3S_4RaE8
00:00 HVAC Completed
00:46 Shop To-Do List
01:29 Hoop Sanding/Buffing
02:28 Badge T-Nuts
02:56 Steel Bushing
03:13 Roping & Lathe Work
04:14 Leather Ears Pliers Tip
04:56 Metal Lathe
05:12 Roping & Lathe Work
05:51 The Two Bobs
06:15 Prepping The Press
06:26 Cutting Wall Hanger Shells
08:15 Cutting Brocade Piccolo Shells
09:36 Minimal Waste
10:35 Pressing A Bob
11:37 Truing Edges
12:19 Reaming Carry Loop Holes
14:26 Wall Hanger Layout
15:48 Wall Hanger Drilling
16:37 Hand Pressing A Bob
17:51 Wall Hanger Sanding
18:07 Wall Hanger Edges
18:18 More Sanding
18:28 Rhythmic Sanding
19:20 Wall Hanger Poly
19:40 Steve Weiss/Calderwood Concert Tom Discussion
21:57 Redacted
22:26 Wall Hanger Talk
24:10 Wrap-Up
I film and edit these videos 100% linearly per workday. The restriction becomes part of the creativity.
|---@Calderwood Percussion---|
■ calderwoodpercussion.com
■ youtube.com/calderwoodpercussion
■ instagram.com/calderwooddrums
|---Social Media Links---|
■ youtube.com/bales5000
■ instructables.com/r/bales
■ instagram.com/bales5000
|---Amazon Storefront---|
■ amazon.com/shop/bales5000
|---Camera Gear---|
Canon EOS Rebel T5i EF-S 18-55 STM Kit - amzn.to/2jiPOS2
Cannon RC-6 Remote - amzn.to/2ik0m50
|---BALES Workshop---|
Tablesaw - amzn.to/2ijAs16
Miter Saw - amzn.to/2jvpcg
Jointer - amzn.to/2j7IkUI
Planer - amzn.to/2jvrs6R
2 HP Router - amzn.to/2ijIeIh
Trim Router - amzn.to/2ig29or
Drum Sander - amzn.to/2jvjLNY
Oscillating Spindle/Belt Sander - amzn.to/2jj87Xi
Belt Sander - amzn.to/2igg39Z
Orbital Sander - amzn.to/2j7X0TT
Nail Gun & Compressor Combo Kit - amzn.to/2j7S0hX
Pin Nailer - amzn.to/2jvqKXf
Grinder - amzn.to/2j7S0hX
Shop Vac - amzn.to/2j77Vwz
Calderwood Shop Day - 17 June 2022
Back after being absent for 2 weekends due to a large HVAC project, I try to salvage hoop finish, but fail.
Bill fabricates some carry loop bushings while I rope two drums, which then get pressed and gut snares installed.
Work starts on a project for Woodshed Stage Art with a tight deadline - 15 wall hanger/trophies.
We also batch out 18 shell blanks for what will become brocade piccolo snares. I plan to make as many as possible before PASIC in November, but part availability will be the limiting factor.
Anyone And Their Mother Share
youtube.com/watch?v=kJX3S_4RaE8
00:00 HVAC Completed
00:46 Shop To-Do List
01:29 Hoop Sanding/Buffing
02:28 Badge T-Nuts
02:56 Steel Bushing
03:13 Roping & Lathe Work
04:14 Leather Ears Pliers Tip
04:56 Metal Lathe
05:12 Roping & Lathe Work
05:51 The Two Bobs
06:15 Prepping The Press
06:26 Cutting Wall Hanger Shells
08:15 Cutting Brocade Piccolo Shells
09:36 Minimal Waste
10:35 Pressing A Bob
11:37 Truing Edges
12:19 Reaming Carry Loop Holes
14:26 Wall Hanger Layout
15:48 Wall Hanger Drilling
16:37 Hand Pressing A Bob
17:51 Wall Hanger Sanding
18:07 Wall Hanger Edges
18:18 More Sanding
18:28 Rhythmic Sanding
19:20 Wall Hanger Poly
19:40 Steve Weiss/Calderwood Concert Tom Discussion
21:57 Redacted
22:26 Wall Hanger Talk
24:10 Wrap-Up
I film and edit these videos 100% linearly per workday. The restriction becomes part of the creativity.
|---@Calderwood Percussion---|
■ calderwoodpercussion.com
■ youtube.com/calderwoodpercussion
■ instagram.com/calderwooddrums
|---Social Media Links---|
■ youtube.com/bales5000
■ instructables.com/r/bales
■ instagram.com/bales5000
|---Amazon Storefront---|
■ amazon.com/shop/bales5000
|---Camera Gear---|
Canon EOS Rebel T5i EF-S 18-55 STM Kit - amzn.to/2jiPOS2
Cannon RC-6 Remote - amzn.to/2ik0m50
|---BALES Workshop---|
Tablesaw - amzn.to/2ijAs16
Miter Saw - amzn.to/2jvpcg
Jointer - amzn.to/2j7IkUI
Planer - amzn.to/2jvrs6R
2 HP Router - amzn.to/2ijIeIh
Trim Router - amzn.to/2ig29or
Drum Sander - amzn.to/2jvjLNY
Oscillating Spindle/Belt Sander - amzn.to/2jj87Xi
Belt Sander - amzn.to/2igg39Z
Orbital Sander - amzn.to/2j7X0TT
Nail Gun & Compressor Combo Kit - amzn.to/2j7S0hX
Pin Nailer - amzn.to/2jvqKXf
Grinder - amzn.to/2j7S0hX
Shop Vac - amzn.to/2j77Vwz
![Philae Temple Complex [Egypt 2019]
Egypt - Friday, June 7th, 2019 [Day 3]
Extremely early wake up call to catch a flight to Aswan and then a bus ride to the Nile cruse ship. Motorboat ride to the Philae island to explore the Temple of Isis, as well as all the surrounding structures.
Information on the Philae Temple Complex
https://en.wikipedia.org/wiki/Philae
Dynasties of Ancient Egypt
https://en.wikipedia.org/wiki/Dynasties_of_Ancient_Egypt Philae Temple Complex [Egypt 2019]](https://i.ytimg.com/vi/UOK5CJCtHAs/mqdefault.jpg)
![Cookie Monster Costume - Slideshow [Halloween 2023]
Cookie Monster has been on my costume wish list for at least a decade, but Ive been hesitant due to several factors - subpar sewing and patterning skills, uncertainty of a few design elements, and knowing it would take a lot of time. Historically, I burned a week of PTO for my yearly dose of costuming therapy. Long days in the shop, a few all nighters, racing towards the beggars night deadline ... and loving every minute of it.
As fate would have it, I experienced a 2023 reduction in force and am currently in what well call a professional transitional period. Obviously, I decided to do the right thing ... put the job search on hold, drop some coin on materials, and spend an entire month creating what may or may not be my best creation yet.
This lovable Monstrosity is a culmination of techniques and design experience Ive acquired over the years, plus new skills ... some of which were painstakingly learned/earned.
| Project Instructable |
■ https://www.instructables.com/Cookie-Monster/
| Social Media Links |
■ http://www.youtube.com/bales5000
■ http://www.instructables.com/r/bales
■ https://www.instagram.com/bales5000
| Amazon Storefront |
■ https://www.amazon.com/shop/bales5000
| Project Specific Materials |
EVA foam, HD foam, faux fur, styrofoam balls, acrylic, PEX, barge, thread, spray paint
| Camera Gear |
Canon EOS Rebel T5i EF-S 18-55 STM Kit - http://amzn.to/2jiPOS2
Cannon RC-6 Remote - http://amzn.to/2ik0m50
| BALES Workshop |
Tablesaw - http://amzn.to/2ijAs16
Miter Saw - http://amzn.to/2jvpcg
Jointer - http://amzn.to/2j7IkUI
Planer - http://amzn.to/2jvrs6R
2 HP Router - http://amzn.to/2ijIeIh
Trim Router - http://amzn.to/2ig29or
Drum Sander - http://amzn.to/2jvjLNY
Oscillating Spindle/Belt Sander - http://amzn.to/2jj87Xi
Belt Sander - http://amzn.to/2igg39Z
Orbital Sander - http://amzn.to/2j7X0TT
Nail Gun & Compressor Combo Kit - http://amzn.to/2j7S0hX
Pin Nailer - http://amzn.to/2jvqKXf
Grinder - http://amzn.to/2j7S0hX
Shop Vac - http://amzn.to/2j77Vwz
Cyclone Separator - http://amzn.to/2j88BCu
Vacuum Remote Switch - http://amzn.to/2jjCBID
Weller 25 Watt Woodburning Kit - http://amzn.to/2igooui Cookie Monster Costume - Slideshow [Halloween 2023]](https://i.ytimg.com/vi/V7iRm1TNt3E/mqdefault.jpg)

![Luxor Temple Complex [Egypt 2019]
Egypt - Sunday, June 9th, 2019 [Day 5]
Last site of the day - Luxor Temple at sunset
Luxor Temple
https://en.wikipedia.org/wiki/Luxor_Temple
Luxor Obelisks
https://en.wikipedia.org/wiki/Luxor_Obelisks
Luxor 11 Degree Offset Research Example
http://www.davidfurlong.co.uk/pdf/egyptian_temple_orientation.pdf
Dynasties of Ancient Egypt
https://en.wikipedia.org/wiki/Dynasties_of_Ancient_Egypt Luxor Temple Complex [Egypt 2019]](https://i.ytimg.com/vi/W8QvhZVoPJw/mqdefault.jpg)


![Taiko Tag Team
Calderwood Shop Day - 02 February 2024
BALES sands back the five snares again and completes the 2024 broad shop organization.
Bill starts a run of Calderwood strainers [3 bronze, 6 brass, and 6 aluminum] and does business stuff off camera.
We both work on the Taikos - finessing the burst/fade and applying the first coat of finish. A roller room modification was required, which of course took longer than expected.
Bill Sr. and Momma Whitney were on-prem, but I didnt stick a camera in their faces.
I film and edit these videos 100% linearly per workday. The restriction becomes part of the creativity.
| @Calderwood Percussion |
■ https://www.calderwoodpercussion.com
■ https://www.youtube.com/calderwoodpercussion
■ https://www.tiktok.com/@calderwoodpercussion
■ https://www.instagram.com/calderwooddrums
■ https://www.facebook.com/CalderwoodPercussion/
| Social Media Links |
■ http://www.youtube.com/bales5000
■ http://www.instructables.com/r/bales
■ https://www.instagram.com/bales5000
| Amazon Storefront |
■ https://www.amazon.com/shop/bales5000
| Camera Gear |
Canon EOS Rebel T5i EF-S 18-55 STM Kit - http://amzn.to/2jiPOS2
Cannon RC-6 Remote - http://amzn.to/2ik0m50
Rode Go II
| BALES Workshop |
Tablesaw - http://amzn.to/2ijAs16
Miter Saw - http://amzn.to/2jvpcg
Jointer - http://amzn.to/2j7IkUI
Planer - http://amzn.to/2jvrs6R
2 HP Router - http://amzn.to/2ijIeIh
Trim Router - http://amzn.to/2ig29or
Drum Sander - http://amzn.to/2jvjLNY
Oscillating Spindle/Belt Sander - http://amzn.to/2jj87Xi
Belt Sander - http://amzn.to/2igg39Z
Orbital Sander - http://amzn.to/2j7X0TT
Nail Gun & Compressor Combo Kit - http://amzn.to/2j7S0hX
Pin Nailer - http://amzn.to/2jvqKXf
Grinder - http://amzn.to/2j7S0hX
Shop Vac - http://amzn.to/2j77Vwz Taiko Tag Team](https://i.ytimg.com/vi/XXtu7UaS-Q4/mqdefault.jpg)
![1984 Ghostbuster Costume - Slideshow [Halloween 2019]
Not yet ready to tackle a full body costume, I decided to fulfill a costume dream and make a Proton Pack. The vacuum formed packs with full light and sound are pretty sweet, but Im a hobbyist on a budget ... a zero budget. EVA foam and PVC were once again my material of choice.
First Place in the 2019 Instructables Halloween Contest
| Project Instructable |
■ https://www.instructables.com/Ghostbuster-Costume-1984/
| Social Media Links |
■ http://www.youtube.com/bales5000
■ http://www.instructables.com/r/bales
■ https://www.instagram.com/bales5000
| Amazon Storefront |
■ https://www.amazon.com/shop/bales5000
| Music |
Song: Ghostbusters_Spectral Version
Performed by Ray Parker Jr.
| Project Specific Materials |
EVA foam, PVC, messenger bag straps, plywood, hardware, coveralls, belt, EL wire, hazard light, cable wrap.
| Camera Gear |
Canon EOS Rebel T5i EF-S 18-55 STM Kit - http://amzn.to/2jiPOS2
Cannon RC-6 Remote - http://amzn.to/2ik0m50
| BALES Workshop |
Tablesaw - http://amzn.to/2ijAs16
Miter Saw - http://amzn.to/2jvpcg
Jointer - http://amzn.to/2j7IkUI
Planer - http://amzn.to/2jvrs6R
2 HP Router - http://amzn.to/2ijIeIh
Trim Router - http://amzn.to/2ig29or
Drum Sander - http://amzn.to/2jvjLNY
Oscillating Spindle/Belt Sander - http://amzn.to/2jj87Xi
Belt Sander - http://amzn.to/2igg39Z
Orbital Sander - http://amzn.to/2j7X0TT
Nail Gun & Compressor Combo Kit - http://amzn.to/2j7S0hX
Pin Nailer - http://amzn.to/2jvqKXf
Grinder - http://amzn.to/2j7S0hX
Shop Vac - http://amzn.to/2j77Vwz
Cyclone Separator - http://amzn.to/2j88BCu
Vacuum Remote Switch - http://amzn.to/2jjCBID
Weller 25 Watt Woodburning Kit - http://amzn.to/2igooui 1984 Ghostbuster Costume - Slideshow [Halloween 2019]](https://i.ytimg.com/vi/XnMdwoa82lI/mqdefault.jpg)


