Uploaded February 2024 | Updated November 2026, 2 hours ago
Calderwood Shop Day - 02 February 2024
BALES sands back the five snares again and completes the 2024 broad shop organization.
Bill starts a run of Calderwood strainers [3 bronze, 6 brass, and 6 aluminum] and does business stuff off camera.
We both work on the Taikos - finessing the burst/fade and applying the first coat of finish. A roller room modification was required, which of course took longer than expected.
Bill Sr. and Momma Whitney were on-prem, but I didn't stick a camera in their faces.
I film and edit these videos 100% linearly per workday. The restriction becomes part of the creativity.
|---@Calderwood Percussion---|
■ calderwoodpercussion.com
■ youtube.com/calderwoodpercussion
■ tiktok.com/@calderwoodpercussion
■ instagram.com/calderwooddrums
■ facebook.com/CalderwoodPercussion
|---Social Media Links---|
■ youtube.com/bales5000
■ instructables.com/r/bales
■ instagram.com/bales5000
|---Amazon Storefront---|
■ amazon.com/shop/bales5000
|---Camera Gear---|
Canon EOS Rebel T5i EF-S 18-55 STM Kit - amzn.to/2jiPOS2
Cannon RC-6 Remote - amzn.to/2ik0m50
Rode Go II
|---BALES Workshop---|
Tablesaw - amzn.to/2ijAs16
Miter Saw - amzn.to/2jvpcg
Jointer - amzn.to/2j7IkUI
Planer - amzn.to/2jvrs6R
2 HP Router - amzn.to/2ijIeIh
Trim Router - amzn.to/2ig29or
Drum Sander - amzn.to/2jvjLNY
Oscillating Spindle/Belt Sander - amzn.to/2jj87Xi
Belt Sander - amzn.to/2igg39Z
Orbital Sander - amzn.to/2j7X0TT
Nail Gun & Compressor Combo Kit - amzn.to/2j7S0hX
Pin Nailer - amzn.to/2jvqKXf
Grinder - amzn.to/2j7S0hX
Shop Vac - amzn.to/2j77Vwz
Calderwood Shop Day - 02 February 2024
BALES sands back the five snares again and completes the 2024 broad shop organization.
Bill starts a run of Calderwood strainers [3 bronze, 6 brass, and 6 aluminum] and does business stuff off camera.
We both work on the Taikos - finessing the burst/fade and applying the first coat of finish. A roller room modification was required, which of course took longer than expected.
Bill Sr. and Momma Whitney were on-prem, but I didn't stick a camera in their faces.
I film and edit these videos 100% linearly per workday. The restriction becomes part of the creativity.
|---@Calderwood Percussion---|
■ calderwoodpercussion.com
■ youtube.com/calderwoodpercussion
■ tiktok.com/@calderwoodpercussion
■ instagram.com/calderwooddrums
■ facebook.com/CalderwoodPercussion
|---Social Media Links---|
■ youtube.com/bales5000
■ instructables.com/r/bales
■ instagram.com/bales5000
|---Amazon Storefront---|
■ amazon.com/shop/bales5000
|---Camera Gear---|
Canon EOS Rebel T5i EF-S 18-55 STM Kit - amzn.to/2jiPOS2
Cannon RC-6 Remote - amzn.to/2ik0m50
Rode Go II
|---BALES Workshop---|
Tablesaw - amzn.to/2ijAs16
Miter Saw - amzn.to/2jvpcg
Jointer - amzn.to/2j7IkUI
Planer - amzn.to/2jvrs6R
2 HP Router - amzn.to/2ijIeIh
Trim Router - amzn.to/2ig29or
Drum Sander - amzn.to/2jvjLNY
Oscillating Spindle/Belt Sander - amzn.to/2jj87Xi
Belt Sander - amzn.to/2igg39Z
Orbital Sander - amzn.to/2j7X0TT
Nail Gun & Compressor Combo Kit - amzn.to/2j7S0hX
Pin Nailer - amzn.to/2jvqKXf
Grinder - amzn.to/2j7S0hX
Shop Vac - amzn.to/2j77Vwz
![1984 Ghostbuster Costume - Slideshow [Halloween 2019]
Not yet ready to tackle a full body costume, I decided to fulfill a costume dream and make a Proton Pack. The vacuum formed packs with full light and sound are pretty sweet, but Im a hobbyist on a budget ... a zero budget. EVA foam and PVC were once again my material of choice.
First Place in the 2019 Instructables Halloween Contest
| Project Instructable |
■ https://www.instructables.com/Ghostbuster-Costume-1984/
| Social Media Links |
■ http://www.youtube.com/bales5000
■ http://www.instructables.com/r/bales
■ https://www.instagram.com/bales5000
| Amazon Storefront |
■ https://www.amazon.com/shop/bales5000
| Music |
Song: Ghostbusters_Spectral Version
Performed by Ray Parker Jr.
| Project Specific Materials |
EVA foam, PVC, messenger bag straps, plywood, hardware, coveralls, belt, EL wire, hazard light, cable wrap.
| Camera Gear |
Canon EOS Rebel T5i EF-S 18-55 STM Kit - http://amzn.to/2jiPOS2
Cannon RC-6 Remote - http://amzn.to/2ik0m50
| BALES Workshop |
Tablesaw - http://amzn.to/2ijAs16
Miter Saw - http://amzn.to/2jvpcg
Jointer - http://amzn.to/2j7IkUI
Planer - http://amzn.to/2jvrs6R
2 HP Router - http://amzn.to/2ijIeIh
Trim Router - http://amzn.to/2ig29or
Drum Sander - http://amzn.to/2jvjLNY
Oscillating Spindle/Belt Sander - http://amzn.to/2jj87Xi
Belt Sander - http://amzn.to/2igg39Z
Orbital Sander - http://amzn.to/2j7X0TT
Nail Gun & Compressor Combo Kit - http://amzn.to/2j7S0hX
Pin Nailer - http://amzn.to/2jvqKXf
Grinder - http://amzn.to/2j7S0hX
Shop Vac - http://amzn.to/2j77Vwz
Cyclone Separator - http://amzn.to/2j88BCu
Vacuum Remote Switch - http://amzn.to/2jjCBID
Weller 25 Watt Woodburning Kit - http://amzn.to/2igooui 1984 Ghostbuster Costume - Slideshow [Halloween 2019]](https://i.ytimg.com/vi/XnMdwoa82lI/mqdefault.jpg)



![Four Days in Rural Westphalia [2026]
Sunday - 26 April 2026 - Wednesday 29 April 2026
Car from Münster to Lippstadt
Four days in rural Westphalia, specifically the district of Soest. Two days last year wasnt enough, so we doubled it this time to ensure time for genealogy research, visits with the German relatives, and history side missions.
I dislike recording VO, so I used a robot. Its saved a lot of time, anxiety, and frustration.
Links for the Curious:
Wadersloh: https://de.wikipedia.org/wiki/St._Margareta_(Wadersloh)
Benninghausen: https://de.wikipedia.org/wiki/Benninghausen
Horn: https://de.wikipedia.org/wiki/Horn-Millinghausen
St. Cyriakus: https://de.wikipedia.org/wiki/St._Cyriakus_(Horn-Millinghausen)
Schmerlecke: https://de.wikipedia.org/wiki/Schmerlecke
Schloss Erwitte: https://de.wikipedia.org/wiki/Schloss_Erwitte
St. Laurentius: https://de.wikipedia.org/wiki/St._Laurentius_(Erwitte)
Lippstadt: https://de.wikipedia.org/wiki/Lippstadt
Lippstadt Churh Ruins: https://de.wikipedia.org/wiki/Kleine_Marienkirche_(Lippstadt)
Bad Sassendorf: https://en.wikipedia.org/wiki/Bad_Sassendorf
https://www.sauerland.com/en/neusta-pois/ev.-church-sst.-simon-and-judas-thaddeus
https://www.sauerland.com/en/neusta-pois/st.-pantaleon-protestant-church-lohne
https://pr-geseke-erwitte.de/kirchen-und-einrichtungen/kirchen-und-kapellen/kapellen/kapelle-st-stephanus-st-katharina-voellinghausen/
Wewelsburg: https://en.wikipedia.org/wiki/Wewelsburg
[Day 1 Step Count: 16177]
[Day 2 Step Count: 13447]
[Day 3 Step Count: 12455]
[Day 4 Step Count: 16748]
| My Website Genealogy |
https://www.balsancestry.com/
| Social Media Links |
■ http://www.youtube.com/bales5000
■ http://www.instructables.com/r/bales
■ https://www.instagram.com/bales5000 Four Days in Rural Westphalia [2026]](https://i.ytimg.com/vi/Z5j2BMo54xo/mqdefault.jpg)





