pi3g | VR Glove DIY - Build your own VR Glove with a Pico and a MCP3008 + Giveaway @pi3g | Uploaded June 2022 | Updated October 2024, 2 hours ago.
Did you know you can build your own VR Glove for less than 20$?
We use some selfmade flex sensors, a Raspberry Pi Pico, a MCP3008 ADC and some free software to build a VR Glove.

We are giving away five MCP3008 modules. To enter the Giveaway, all you need to do is to like this video, subscribe to our channel and leave a comment of what you woul'd do with your MCP3008.
Winners will be notified next Friday 8/17/2022.

Build your own flex sensors
youtube.com/watch?v=QsllRarEKB4&t=17s

Connect your MCP3008
youtube.com/watch?v=tn8sEqq0sJc

Download the project files from our GitHub
github.com/pi3g/VR-Glove/blob/main/README.md

Get Blender and CircuitPython
blender.org/download
circuitpython.org/board/raspberry_pi_pico
github.com/adafruit/adafruit_CircuitPython_MCP3xxx/releases/tag/1.4.8


Pick up all your electronic needs at our store
buyzero.de/en

Our PiCockpit webinterface allows you to control your Pi over the web
picockpit.com

Need special hardware or software solutions? Contact us!
pi3g.com/de

Check out our Blog to learn incredible things all around the Pi
picockpit.com/raspberry-pi
buyzero.de/blogs/news