pi3g | DIY Sensors - Build your own Flex sensor, Pressure sensor and Vibration sensor @pi3g | Uploaded April 2022 | Updated October 2024, 54 minutes ago.
Who would have guessed that building your own sensors could be so easy? And it is very cheap as well, as you might have everything that you need at home already.
We are building a Flex sensor, a Pressure sensor and a Vibration sensor.
Requirements
- Cardboard
- Paper
- Pencil
- Gluestick
- Tape
- Hot glue gun
- Aluminum foil
- Copper wire
- 10 kOhm resistor
Pick up all your electronic needs at our store
buyzero.de/en
Our PiCockpit webinterface allows you to control your Pi over the web
picockpit.com
Need special hardware or software solutions? Contact us!
pi3g.com/de
Check out our Blog to learn incredible things all around the Pi
picockpit.com/raspberry-pi
buyzero.de/blogs/news
Music from Uppbeat (free for Creators!):
uppbeat.io/t/pryces/aspire
License code: KKAQM6BBTCJRBCAC
Who would have guessed that building your own sensors could be so easy? And it is very cheap as well, as you might have everything that you need at home already.
We are building a Flex sensor, a Pressure sensor and a Vibration sensor.
Requirements
- Cardboard
- Paper
- Pencil
- Gluestick
- Tape
- Hot glue gun
- Aluminum foil
- Copper wire
- 10 kOhm resistor
Pick up all your electronic needs at our store
buyzero.de/en
Our PiCockpit webinterface allows you to control your Pi over the web
picockpit.com
Need special hardware or software solutions? Contact us!
pi3g.com/de
Check out our Blog to learn incredible things all around the Pi
picockpit.com/raspberry-pi
buyzero.de/blogs/news
Music from Uppbeat (free for Creators!):
uppbeat.io/t/pryces/aspire
License code: KKAQM6BBTCJRBCAC