Gregs Maker Corner | Voron 0.1 Tips, Tricks, and Maintenance @GregsMakerCorner | Uploaded October 2021 | Updated October 2024, 14 hours ago.
In this video, I cover several topics that I hope will help you use your Voron 0.1 more effectively, offering some tips and tricks. I also go over several things to keep an eye on in terms of maintenance. Scroll down for specific sections in case you jump to anything specific. Thanks for watching, please like and subscribe if you find my content helpful! Please leave a comment if you have any other tips or tricks as well!
Learn more about the Voron 0.1 here:
vorondesign.com/voron0.1
0:47 - Leveling the bed using Gcode
2:09 - Setting up Preheat Presets
2:39 - Bed Leveling: Bed Screws GCode
3:44 - Bed Leveling: Checking positions using a paper sheet
6:31 - Bed Leveling manually by jogging controls
7:48 - Surfaces- Properly cleaning your print surface (Smooth and Textured PEI)
8:10 - Surfaces- Using a purple glue stick as a release agent
8:30 - Surfaces- Cleaning print surface with dish soap
9:08 - Surfaces- Using IPA in between prints to keep surface clean
9:43 - Rail Maintenance- aligning and cleaning rails
10:18 - Cleaning with compressed air
11:11 - Rail Maintenance- Adjusting X rail
11:57 - Using Grease and Oil Lubes
13:18 - Rail Maintenance - Applying Oil to Rails
14:39 - Lead Screw Maintenance - Applying Grease to Lead Screw
16:37 - Proper positioning for Z endstop screw
17:53 - Inspecting Y axis / gantry racking
18:27 - Filament Loading Tension
19:52 - Filament Loading
20:56 - Filament Gode Macros
21:24 - Filament Unloading
21:53 - Filament- Manual Filament Loading
22:18 - Filament - Using a Shimmy Bin
22:37 - Fans - Regular inspect / test fans
23:15 - Closing
Notable products mentioned:
Amazon Affiliate Links (please use these- it helps me out!). As an Amazon Associate I earn from qualifying purchases.
Synthetic Lube:
amzn.to/3FUyptf
Synthetic Oil:
amzn.to/3BW2TZE
Blue Permatex:
amzn.to/3ATPmjE
Purple Gluestick:
amzn.to/3pdJaRq
Isopropyl Alcohol (Spray Bottle):
amzn.to/3lRp1Pe
3d Printing Shirt:
amzn.to/3G4wHWc
Voron 0.1 Build Sheet (Smooth PEI / Textured PEI):
deepfriedhero.in/products/spring-steel-sheets-with-the-thickness
Shimmy Bin, by Clockspring:
myminifactory.com/object/3d-print-shimmy-bin-175440
My Voron 0.1 Build Series Playlist:
youtube.com/watch?v=bP-F8fo-S1A&list=PLpQnpsv1trbT-WkHpvdFfpSlhTUunMQRa
In this video, I cover several topics that I hope will help you use your Voron 0.1 more effectively, offering some tips and tricks. I also go over several things to keep an eye on in terms of maintenance. Scroll down for specific sections in case you jump to anything specific. Thanks for watching, please like and subscribe if you find my content helpful! Please leave a comment if you have any other tips or tricks as well!
Learn more about the Voron 0.1 here:
vorondesign.com/voron0.1
0:47 - Leveling the bed using Gcode
2:09 - Setting up Preheat Presets
2:39 - Bed Leveling: Bed Screws GCode
3:44 - Bed Leveling: Checking positions using a paper sheet
6:31 - Bed Leveling manually by jogging controls
7:48 - Surfaces- Properly cleaning your print surface (Smooth and Textured PEI)
8:10 - Surfaces- Using a purple glue stick as a release agent
8:30 - Surfaces- Cleaning print surface with dish soap
9:08 - Surfaces- Using IPA in between prints to keep surface clean
9:43 - Rail Maintenance- aligning and cleaning rails
10:18 - Cleaning with compressed air
11:11 - Rail Maintenance- Adjusting X rail
11:57 - Using Grease and Oil Lubes
13:18 - Rail Maintenance - Applying Oil to Rails
14:39 - Lead Screw Maintenance - Applying Grease to Lead Screw
16:37 - Proper positioning for Z endstop screw
17:53 - Inspecting Y axis / gantry racking
18:27 - Filament Loading Tension
19:52 - Filament Loading
20:56 - Filament Gode Macros
21:24 - Filament Unloading
21:53 - Filament- Manual Filament Loading
22:18 - Filament - Using a Shimmy Bin
22:37 - Fans - Regular inspect / test fans
23:15 - Closing
Notable products mentioned:
Amazon Affiliate Links (please use these- it helps me out!). As an Amazon Associate I earn from qualifying purchases.
Synthetic Lube:
amzn.to/3FUyptf
Synthetic Oil:
amzn.to/3BW2TZE
Blue Permatex:
amzn.to/3ATPmjE
Purple Gluestick:
amzn.to/3pdJaRq
Isopropyl Alcohol (Spray Bottle):
amzn.to/3lRp1Pe
3d Printing Shirt:
amzn.to/3G4wHWc
Voron 0.1 Build Sheet (Smooth PEI / Textured PEI):
deepfriedhero.in/products/spring-steel-sheets-with-the-thickness
Shimmy Bin, by Clockspring:
myminifactory.com/object/3d-print-shimmy-bin-175440
My Voron 0.1 Build Series Playlist:
youtube.com/watch?v=bP-F8fo-S1A&list=PLpQnpsv1trbT-WkHpvdFfpSlhTUunMQRa