Uploaded October 2025 | Updated September 2026, 2 weeks ago
In this video, I take 3D models created with Vista Sculpt software and bring them into Vectric Aspire to prepare for CNC carving. You’ll see the full workflow—from importing STL files created in Vista Sculpt, arranging the carving, setting up toolpaths, and finally carving a Shark coming through Coral and Seagrass into a live edge sycamore piece of wood.
This tutorial is a continuation of my previous video where I demonstrated how to create 3D models in Vista Sculpt from photographs, AI-generated images, and Vista Sculpt’s own tools. In this next step, we take those models and turn them into real wooden art.
If you haven't watched that video it would be a good idea for you to watch that video to see how to create the 3D models we will be working with in this video.
That video is at the following link:
Using VS: youtu.be/p9mJLNHFV5Q?si=HhBuscslNJrLpKyh
VS to vCarve: youtu.be/k3Scda3G5YU
Whether you’re new to CNC or looking to take your Vista Sculpt projects further, this walkthrough will help you bridge the gap from digital design to physical carving.
🔗 Special Discount
If interested in VistaSculpt you can use the following coupon code: ROBSANDSTROM20 on their website to receive a 20% discount off the current pricing.
👉 vistasculpt.com/shop
NOTE: This would be on top of any discount codes VistaSculpt is currently providing. VistaSculpt is a European company and their prices are quoted in Euros so there is a need to do a conversion factor if ordering from outside Europe.
@Vistasculpt
👉 Don’t forget to subscribe for more CNC, laser, and 3D design projects!
💡 Whether you’re a maker, woodworker, or digital artist, this video shows exactly how to take an image and turn it into a 3D (or 2D) asset you can actually use.
📌 Chapters:
00:00 Introduction
02:00 Loading Midjourney Image into VistaSculpt
03:20 Removing Background from Image in VistaSculpt
05:00 Creating 3D Model in VistaSculpt
09:50 Starting Aspire to Create 3D Composite Model
19:45 Building Composite Model With STLs from VistaSculpt
23:40 Adjusting Components to Blend Properly
31:45 Setting Up Toolpaths
32:20 Warning About Model Setup at bottom of wood
35:40 Setting a Zero Plane
40:00 Carving the Shark on the CNC
42:05 Cutting Veneered Back to Size
42:35 Final Results
42:44 Summary of Video
👋 If you enjoy woodworking, CNC, laser engraving, or 3D design, subscribe for more tutorials and maker content!
📺 More from my channel:
👉 @RobSandstromDesigns
💬 Leave a comment if you have questions or want to see more tutorials on how to use VistaSculpt in combination with Vectric Software.
🌐 Visit my website for custom projects & tutorials: robsandstromdesigns.com
This video is not sponsored. The following links may be affiliate links. By using these links you are supporting this channel. Thank you.
=====================Bits Used========================
➡️ Amana Tools 1/4" Tapered Ballnose: amzn.to/4nsBKVG
➡️ Skinny Jenny 1/16" Tapered Ballnose: cadencemfgdesign.com/product-page/coming-soon-p-n-8675309-sj-skinny-jenny
=========================================
Equipment and Software I Use
=========================================
Equipment:
Laguna IQ CNC
CNC Design Software: vCarve Pro https://www.vectric.com/products/vcar...
Editing Software:
=== Camtasia: amzn.to/3TQv8nG
Camera: Sony a6700 amzn.to/3PALT3Q
DJIOsmo Pocket 3
Computer: MacBook Pro: amzn.to/3xhRTrO
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: instagram.com/robsandstrom
Facebook: facebook.com/robsandstrom1
#CNCcarving #VistaSculpt #Vectric #vCarvePro #Woodworking #CNCprojects #STL #3Dmodeling #RhinoCarving #LiveEdge #Walnut #DigitalToPhysical #MakerCommunity #WoodCarving #CNCrouter #CNCwoodworking #AIart #3Dcarving #MakersGonnaMake #DeskArt
In this video, I take 3D models created with Vista Sculpt software and bring them into Vectric Aspire to prepare for CNC carving. You’ll see the full workflow—from importing STL files created in Vista Sculpt, arranging the carving, setting up toolpaths, and finally carving a Shark coming through Coral and Seagrass into a live edge sycamore piece of wood.
This tutorial is a continuation of my previous video where I demonstrated how to create 3D models in Vista Sculpt from photographs, AI-generated images, and Vista Sculpt’s own tools. In this next step, we take those models and turn them into real wooden art.
If you haven't watched that video it would be a good idea for you to watch that video to see how to create the 3D models we will be working with in this video.
That video is at the following link:
Using VS: youtu.be/p9mJLNHFV5Q?si=HhBuscslNJrLpKyh
VS to vCarve: youtu.be/k3Scda3G5YU
Whether you’re new to CNC or looking to take your Vista Sculpt projects further, this walkthrough will help you bridge the gap from digital design to physical carving.
🔗 Special Discount
If interested in VistaSculpt you can use the following coupon code: ROBSANDSTROM20 on their website to receive a 20% discount off the current pricing.
👉 vistasculpt.com/shop
NOTE: This would be on top of any discount codes VistaSculpt is currently providing. VistaSculpt is a European company and their prices are quoted in Euros so there is a need to do a conversion factor if ordering from outside Europe.
@Vistasculpt
👉 Don’t forget to subscribe for more CNC, laser, and 3D design projects!
💡 Whether you’re a maker, woodworker, or digital artist, this video shows exactly how to take an image and turn it into a 3D (or 2D) asset you can actually use.
📌 Chapters:
00:00 Introduction
02:00 Loading Midjourney Image into VistaSculpt
03:20 Removing Background from Image in VistaSculpt
05:00 Creating 3D Model in VistaSculpt
09:50 Starting Aspire to Create 3D Composite Model
19:45 Building Composite Model With STLs from VistaSculpt
23:40 Adjusting Components to Blend Properly
31:45 Setting Up Toolpaths
32:20 Warning About Model Setup at bottom of wood
35:40 Setting a Zero Plane
40:00 Carving the Shark on the CNC
42:05 Cutting Veneered Back to Size
42:35 Final Results
42:44 Summary of Video
👋 If you enjoy woodworking, CNC, laser engraving, or 3D design, subscribe for more tutorials and maker content!
📺 More from my channel:
👉 @RobSandstromDesigns
💬 Leave a comment if you have questions or want to see more tutorials on how to use VistaSculpt in combination with Vectric Software.
🌐 Visit my website for custom projects & tutorials: robsandstromdesigns.com
This video is not sponsored. The following links may be affiliate links. By using these links you are supporting this channel. Thank you.
=====================Bits Used========================
➡️ Amana Tools 1/4" Tapered Ballnose: amzn.to/4nsBKVG
➡️ Skinny Jenny 1/16" Tapered Ballnose: cadencemfgdesign.com/product-page/coming-soon-p-n-8675309-sj-skinny-jenny
=========================================
Equipment and Software I Use
=========================================
Equipment:
Laguna IQ CNC
CNC Design Software: vCarve Pro https://www.vectric.com/products/vcar...
Editing Software:
=== Camtasia: amzn.to/3TQv8nG
Camera: Sony a6700 amzn.to/3PALT3Q
DJIOsmo Pocket 3
Computer: MacBook Pro: amzn.to/3xhRTrO
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: instagram.com/robsandstrom
Facebook: facebook.com/robsandstrom1
#CNCcarving #VistaSculpt #Vectric #vCarvePro #Woodworking #CNCprojects #STL #3Dmodeling #RhinoCarving #LiveEdge #Walnut #DigitalToPhysical #MakerCommunity #WoodCarving #CNCrouter #CNCwoodworking #AIart #3Dcarving #MakersGonnaMake #DeskArt
