Uploaded May 2024 | Updated November 2026, 1 day ago
Live Thursday 5-2-24
In this video we covered follow-up question to the video released earlier in the week Mastering Z Zero: Top of Material vs. Machine Bed – A Comprehensive Guide to Deciding Which is Best: studio.youtube.com/video/uwk-aF9NwFQ/edit
We then branched into various highlights that Rob likes
Most of the time was then spent on a couple examples of how Rob generated images from AI and then used them in Vectric vCarve pro Version 12 and Lightburn.
⏰Timecodes⏰
00:00 Introduction Opening of Live Nothing Very Useful
01:00 Followup Questions on the Mastering Z Zero video released earlier in the week
05:00 Discussion of "Drip Stock" Files for making bowls
08:15 Question About Dealing with Wood Movement When Preparing for a Project
10:30 Thoughts About What rob Likes with v12 in vCarve
12:00 Importing Pictures into vCarve
16:00 Ability to manipulate vectors in both 2D and 3D views
22:00 Use of AI and Sketch Carving Example
30:00 Question About AI Images and How They are Working with Lightburn
31:15 Limitation of Sketch Carve Toolpath because it does not provide vectors to manipulate and how to address that
42:40 How to import AI images into Lightburn and results
54:00 Closeout Disscussions
Rob made positive recommendations and expressed appreciation to the following programs and organizations. Although he does not receive any support from them for his efforts or receive payment for his discussion of them in the live sessions, some of these groups have provided Rob an affiliate link that provides a small commission if people decide to use their services after clicking on these links.
Kyle Ely - Learn Your CNC program was discussed a couple times. Rob recommends Learn Your CNC in many different forms because he sees significant value in Kyle's course. Below are links to Kyle's Course. Rob is not sponsored by Kyle but he does have an affiliate link where he can make a small commission from someone that purchases the Learn Your CNC Training Course or Live Training Program. Below are the links to Learn Your CNC:
Learn Your CNC Vectric Master Training Course: academy.learnyourcnc.com/a/2147507626/d2gAYqfA
Learn Your CNC Weekly Live Vectric Group Training: academy.learnyourcnc.com/a/2147507627/d2gAYqfA
Rob also shared his experience with Steve Nealon from Harneal Media. Similar to Learn Your CNC, Rob is not sponsored by Steve but Steve has provided Rob an affiliate link if people find their way to his services through Rob's recommendations.
Purchased Models for Bowl he is creating from Corbin Dunn at: corbinsworkshop.com/shop/heart-bowl-plans-directions-model-stl-fusion-360-cnc-files
Mark Lindsay CNC channel was mentioned as a source for inspiration a couple times in this video you can check his channel out at: youtube.com/@UCMrMqMabXS5_cFcq5K9Ob-w
Mike Bernasconi assistance in working with AI and 3D Modeling. You can see Mike's work at the following Website: envision-create.com
Jim Matthews for all of his help with Corbin's files
Live Thursday 5-2-24
In this video we covered follow-up question to the video released earlier in the week Mastering Z Zero: Top of Material vs. Machine Bed – A Comprehensive Guide to Deciding Which is Best: studio.youtube.com/video/uwk-aF9NwFQ/edit
We then branched into various highlights that Rob likes
Most of the time was then spent on a couple examples of how Rob generated images from AI and then used them in Vectric vCarve pro Version 12 and Lightburn.
⏰Timecodes⏰
00:00 Introduction Opening of Live Nothing Very Useful
01:00 Followup Questions on the Mastering Z Zero video released earlier in the week
05:00 Discussion of "Drip Stock" Files for making bowls
08:15 Question About Dealing with Wood Movement When Preparing for a Project
10:30 Thoughts About What rob Likes with v12 in vCarve
12:00 Importing Pictures into vCarve
16:00 Ability to manipulate vectors in both 2D and 3D views
22:00 Use of AI and Sketch Carving Example
30:00 Question About AI Images and How They are Working with Lightburn
31:15 Limitation of Sketch Carve Toolpath because it does not provide vectors to manipulate and how to address that
42:40 How to import AI images into Lightburn and results
54:00 Closeout Disscussions
Rob made positive recommendations and expressed appreciation to the following programs and organizations. Although he does not receive any support from them for his efforts or receive payment for his discussion of them in the live sessions, some of these groups have provided Rob an affiliate link that provides a small commission if people decide to use their services after clicking on these links.
Kyle Ely - Learn Your CNC program was discussed a couple times. Rob recommends Learn Your CNC in many different forms because he sees significant value in Kyle's course. Below are links to Kyle's Course. Rob is not sponsored by Kyle but he does have an affiliate link where he can make a small commission from someone that purchases the Learn Your CNC Training Course or Live Training Program. Below are the links to Learn Your CNC:
Learn Your CNC Vectric Master Training Course: academy.learnyourcnc.com/a/2147507626/d2gAYqfA
Learn Your CNC Weekly Live Vectric Group Training: academy.learnyourcnc.com/a/2147507627/d2gAYqfA
Rob also shared his experience with Steve Nealon from Harneal Media. Similar to Learn Your CNC, Rob is not sponsored by Steve but Steve has provided Rob an affiliate link if people find their way to his services through Rob's recommendations.
Purchased Models for Bowl he is creating from Corbin Dunn at: corbinsworkshop.com/shop/heart-bowl-plans-directions-model-stl-fusion-360-cnc-files
Mark Lindsay CNC channel was mentioned as a source for inspiration a couple times in this video you can check his channel out at: youtube.com/@UCMrMqMabXS5_cFcq5K9Ob-w
Mike Bernasconi assistance in working with AI and 3D Modeling. You can see Mike's work at the following Website: envision-create.com
Jim Matthews for all of his help with Corbin's files










