Vintage Prototype Speaker-Phone Device (INCLUDES A TELEPHONE CONVERSATION) @CassetteMaster
Vintage Prototype Speaker-Phone Device (INCLUDES A TELEPHONE CONVERSATION)  @CassetteMaster
Uploaded October 2020 | Updated November 2026, 2 days ago
This is the Monaco Enterprises, Inc. (Not to be confused with Monaco Enterprises, Inc.) model MTA-1A. Serial No. _ _ _ _ _.


Inside, it is labeled "Sample F". Sample, eh? No serial number? I believe this is a prototype unit(!), one of at least six (I mis-counted in the video and said five, I must have subconsciously thinking of grade letters skipping 'E') made (assuming there were Samples A through E). I don't know if any of the other samples still exist or not.


I found this at a hamfest years ago, and have not done much with it for a long time, with it sitting in storage in my garage in a box. Finally, I pulled it out again and desired to get it to operate. It had an overheating mystery audio amp IC (they scratched off the part no.), so I jury-rigged an LM386 IC in there (the pinout was almost the same, but slightly different) and it works now. Original electrolytics are still good. Some tantilums were high-ESR, but still OK. I ended up using them as I did not have capacitors of the same value on hand (and they are used for timing functions, not audio).


This is a phun device for speakerphone! A condenser mike picks up your voice, and sends it, amplified to listenable levels, to the telephone line. When audio comes in from the telephone line to the device, it senses the presence of a signal, switches from the microphone to the speaker, and out comes the voice on the other end. When the person on the telephone stops speaking, the lack of audio signal causes the device to switch off the speaker and back to the condenser microphone to pick up the guy using the Speakerphone.


Now this is not the first speakerphone to exist. The original speakerphone was invented in 1948. And there were plenty of MA-BELL Western Electric speakerphones. But this one is special, as it was a product that as far as it seems, never went into full production. It is a rarity, and really cool.


I know, some of you are probably raging at me because I replaced a part in a prototype, even jury-rigging a different IC in a socket. I am aware that it is no longer 100% original, but I was more interested in having it be functional than just serving as a paperweight.
























I just LOVE carbon microphones:)
Vintage Prototype Speaker-Phone Device (INCLUDES A TELEPHONE CONVERSATION)BM-85K Soviet Cassette Recorder, 1990Homemade 128KB SRAM Digital Audio RecorderGabes YT Voice Synthesized with LPCMagnemite 610 DV Tape Recorder!!!!!!Watergate Recorder - Sony TC-800BUher CR 240 Stereo Cassette Tape Recorder, c. 197728: Secret ResistanceAt My Desk 8 - Pencillis Disease sans TreatmentSound Powered Telephones with Luke and Ricky Conversing and Having FunChallen Minivox C Reel-to-Reel Tape RecorderDroning About with Luke and Ricky   Audio from Cassette Tape
CassetteMaster |

Vintage Prototype Speaker-Phone Device (INCLUDES A TELEPHONE CONVERSATION)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER