Uploaded October 2013 | Updated November 2026, 11 hours ago
If you enjoy my videos, Please consider contributing to my research.
Patreon: patreon.com/Limitless_Research
Inspired by Viktor Grebennikov and TheRealVerbs.
If you liked this video, check out my new series.
youtube.com/playlist?list=PLw5nod7UMEzbpSFiJ5jb8eLCF5ffCTguy
This video demonstrates the static electric effect of nylon and other plastics on dry leaves. After seeing many videos on this phenomenon using beetle wing covers, I decided to attempt to replicate the results for myself. So far I have been able to replicate them repelling each other up to 4-5", stick to & repel from stainless steel, & stick to aluminum. All of these are mimicked with dry leaves to show that there is nothing special about the wing covers when placed in a static electric field. I will continue the research into the areas Viktor Grebennikov began in, CSE of larger structures (honeycomb, bee & wasp hives) and their effect on carbon graphite. I will upload any interesting results.
CONCLUSION:
Videos that show this effect on beetle wing covers while using any of the following are hoaxes and misleading (nylon, plastic, plexiglas, ect...). Wing covers will not show this effect on grounded materials and other objects (dry leaves shown here) will mimic the same results if placed in an electric field. My research will continue with this in mind.
As crazy as this sounds, the point of this research is to be able to replicate the flying platform made by Viktor Grebennikov. This would involve identifying the nonostructures that cause the hover effect and possibly have them replicated onto sheets. Viktor claimed he used beetle wing covers to create a flying platform that could reach speeds up to 1500+ mph without feeling the effects of inertia, wind, or air friction. For those viewers who do not know anything about this research, please visit this website for more information.
keelynet.com/greb/greb.htm
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching,
Russell
If you enjoy my videos, Please consider contributing to my research.
Patreon: patreon.com/Limitless_Research
Inspired by Viktor Grebennikov and TheRealVerbs.
If you liked this video, check out my new series.
youtube.com/playlist?list=PLw5nod7UMEzbpSFiJ5jb8eLCF5ffCTguy
This video demonstrates the static electric effect of nylon and other plastics on dry leaves. After seeing many videos on this phenomenon using beetle wing covers, I decided to attempt to replicate the results for myself. So far I have been able to replicate them repelling each other up to 4-5", stick to & repel from stainless steel, & stick to aluminum. All of these are mimicked with dry leaves to show that there is nothing special about the wing covers when placed in a static electric field. I will continue the research into the areas Viktor Grebennikov began in, CSE of larger structures (honeycomb, bee & wasp hives) and their effect on carbon graphite. I will upload any interesting results.
CONCLUSION:
Videos that show this effect on beetle wing covers while using any of the following are hoaxes and misleading (nylon, plastic, plexiglas, ect...). Wing covers will not show this effect on grounded materials and other objects (dry leaves shown here) will mimic the same results if placed in an electric field. My research will continue with this in mind.
As crazy as this sounds, the point of this research is to be able to replicate the flying platform made by Viktor Grebennikov. This would involve identifying the nonostructures that cause the hover effect and possibly have them replicated onto sheets. Viktor claimed he used beetle wing covers to create a flying platform that could reach speeds up to 1500+ mph without feeling the effects of inertia, wind, or air friction. For those viewers who do not know anything about this research, please visit this website for more information.
keelynet.com/greb/greb.htm
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching,
Russell






![Laser EPG 019 - Creating Magnetic Gas, Toroidal Shapes (Magnegas, Magnehyrogen, MagneFuel)
Inspired by Stanley Meyer, RWG Research, Dr. Ruggero Maria Sanyilli, & many other YouTube members. This is the nineteenth video of many to come. I am focusing my efforts on building a Laser Electrical Partial Generator (EPG) similar to the one Stanley Meyer talks about in the New Zealand lecture video.
This video focuses on MagneGas. I am only attempting to spread the word of how magnetic gas can be made. My hope is if we understand the process of how MagneGas is produced, it will help us understand how Stan Meyer made his magnetic gas. Stan said that there are many different atom combinations that will produce magnetic gas. This looks like one of them.
I am not saying this is the exact method Stan used. I merely want to introduce the technology in the hopes that it will further our research and collective knowledge on magnetic gas production.
Explanation of MagneGas production (2min to 6min):
http://youtu.be/Wy0WXkj1Drw
Magnetic attraction force demonstration of MagneGas in a balloon:
http://youtu.be/bFsZ1NrtIMk
About Dr. Ruggero Maria Santilli:
https://en.wikipedia.org/wiki/Ruggero_Santilli
MagneGas website and other more videos:
http://magnegas.com/
Article discussed in this video:
https://www.santilli-foundation.org/docs/MagneHydrogen-2012.pdf
Patent 8,236,150 (Plasma-arc-through apparatus)
http://www.google.com/patents/US8236150
Power Source:
The power source is, for example, an AC-DC welder; a high voltage DC current source; a pulsed DC current source, pulsating at a frequency which is a sub-multiple of a resonating frequency of the selected liquid [Ex: Water 60Hz]; an AC welder; an AC source with variable high voltage and high frequency; an AC source with variable frequency which is a sub-multiple of the resonating frequency of the selected liquid; or other commercially available sources of electricity suitable to create a submerged electric arc.
Optimizing the energy of the gas:
The energy of the output, is increased significantly by several factors. A first factor is the use of a DC current with high voltage, such as 100,000 VDC current. Another factor is the use of a high voltage DC current pulsating at a resonating frequency [42KHz for water] or sub-multiple of the resonating frequency [60Hz for water] of the processed liquid (feedstock). Another factor is forcing the liquid (feedstock) through the arc to reduce collection of gas bubbles within the arc that lead to unwanted ignition of the gas bubbles and/or the arc passing through the higher impedance gas bubbles rather than the lower impedance liquid (feedstock).
Please leave your comments & suggestions. Constructive criticism is welcomed.
Thanks for watching,
Russell Laser EPG 019 - Creating Magnetic Gas, Toroidal Shapes (Magnegas, Magnehyrogen, MagneFuel)](https://i.ytimg.com/vi/lIpwttSZcu8/mqdefault.jpg)



