Uploaded April 2022 | Updated September 2026, 3 days ago

---

Contact VideoRay's customer support at support@videoray.com or visit videoray.com for more information.

0:00 Introduction
0:09 Removing the float block
0:22 Thruster identification and location
0:55 Vertical aft thruster
1:14 Unplug the thruster
1:29 Remove the M5 screws
1:45 Remove the thruster
1:55 Record the new thruster's serial number
2:04 Install the new thruster
2:22 Install the M5 screws
2:36 Apply grease
2:52 Plug the new thruster's connector to the chain
3:08 Connect the Defender to the control console
3:22 Program the thruster
4:02 Replace the float block