Uploaded April 2011 | Updated November 2026, 3 hours ago
Go to our Natural Building Blog where we answer questions.
naturalbuildingblog.com
If you've been watching our videos, you've seen us making various earthen blocks. This one here is the best one so far. It has clay and rice hulls. Another very good block was the clay with vetiver grass. So I had the idea to combine the best -- the rice hulls and the vetiver. That's what we're testing today. This block back here is adobe, just the traditional adobe mix. We're using this wood form that's 10"x14"x6" high. That's a typical size earthen block. You could put these same materials in earthbags, but it's a lot of extra work. It would only be worthwhile probably if you wanted something special like a lightweight insulated earthbag.
We're using the same basic ingredients -- rice hulls, chopped vetiver for fiber to hold the block together, sifted sand and clay soil. This is not pure clay, this is clay soil. You have to experiment with your own soil and ingredients to get the right mix, but this is what we've been using approximately 2:1 -- two parts clay soil to one part sand, one part rice hulls, one part vetiver, and enough water to make a stiff mix, but no extra water. Add the clay first -- the clay soil actually -- with a little bit of water and let it soak. This saves a lot of mixing. Add a little at a time. And again, it would be easier to make this in large quantities in a pit or on a large tarp. We're just making one small sample here. Add the ingredients in layers to reduce mixing. Add the fiber at the end to make mixing easier.
I like the vetiver grass, because it adds termite resistance and tensile strength. We made a second small batch in order to fill this mold. I think this is going to be our best block so far. We're combining everything we've learned to make a block that's stronger, lighter, insulating and insect resistant. Another thing we're doing this time is we're pouring it in the mold in place. This adobe block we made elsewhere and it cracked as I was carrying it over here to dry. This time we'll make it right here and we won't move it around. We should have a stronger block. In about two weeks or so we're going to test all these blocks that we've made and see which ones are the strongest and the best. So stay tuned for our next video.
Go to our Natural Building Blog where we answer questions.
naturalbuildingblog.com
If you've been watching our videos, you've seen us making various earthen blocks. This one here is the best one so far. It has clay and rice hulls. Another very good block was the clay with vetiver grass. So I had the idea to combine the best -- the rice hulls and the vetiver. That's what we're testing today. This block back here is adobe, just the traditional adobe mix. We're using this wood form that's 10"x14"x6" high. That's a typical size earthen block. You could put these same materials in earthbags, but it's a lot of extra work. It would only be worthwhile probably if you wanted something special like a lightweight insulated earthbag.
We're using the same basic ingredients -- rice hulls, chopped vetiver for fiber to hold the block together, sifted sand and clay soil. This is not pure clay, this is clay soil. You have to experiment with your own soil and ingredients to get the right mix, but this is what we've been using approximately 2:1 -- two parts clay soil to one part sand, one part rice hulls, one part vetiver, and enough water to make a stiff mix, but no extra water. Add the clay first -- the clay soil actually -- with a little bit of water and let it soak. This saves a lot of mixing. Add a little at a time. And again, it would be easier to make this in large quantities in a pit or on a large tarp. We're just making one small sample here. Add the ingredients in layers to reduce mixing. Add the fiber at the end to make mixing easier.
I like the vetiver grass, because it adds termite resistance and tensile strength. We made a second small batch in order to fill this mold. I think this is going to be our best block so far. We're combining everything we've learned to make a block that's stronger, lighter, insulating and insect resistant. Another thing we're doing this time is we're pouring it in the mold in place. This adobe block we made elsewhere and it cracked as I was carrying it over here to dry. This time we'll make it right here and we won't move it around. We should have a stronger block. In about two weeks or so we're going to test all these blocks that we've made and see which ones are the strongest and the best. So stay tuned for our next video.



![Earth Block Testing
Go to our Natural Building Blog where we answer questions.
http://naturalbuildingblog.com
Today were testing the various earth blocks and earthbags that weve made over the last 2-3 months. Were going to weigh each sample, do a visual inspection for example, well test the hardness and look at it carefully. Also were going to do a shear test. You see over here we have two blocks set 10 apart, and Ill stand on top of the block or on top of the bag. Also, Im going to cut the bags open and then cut the samples in half so we can inspect the inside. Well post the results on our Earthbag Building Blog. [Note: theres also a 4 drop test at the end, where samples are dropped on one corner.] I have to preface this by saying this is not a careful, scientific experiment. It started out as a fun thing to try. It was haphazardly done. Many of the samples were moved before they had dried. Many were left out in the rain. Two samples were totally destroyed the ones with the (rice hull) ash. So its unfortunate, but this was never intended to be a careful experiment. So the test results are going to be questionable at best. But still, I think we can ... I think its a worthwhile experiment and we can learn a little bit, so well see how it goes.
[They sound very solid.] This bag I had high hopes for, but it was not made very carefully. You can see the cracks that developed because the bag was not contained (constrained). It was tamped and kept expanding without anything restraining it, and it formed cracks. This was a bag with road base and extra clay. So this is unfortunate because I had high hopes for this. Obviously if you have big cracks its not going to pass the shear test, I dont think. This one is the clay and rice hulls. You can hear it has a dull sound. It has good insulation. Again, it has some bad cracks. If we did this again, next time I would constrain the ends so they cant expand and cause these cracks. In an earthbag wall the bags are butted against each other, where these samples were not. So this was a valuable lesson learned.
[Shear test.] This is good news. The road base with extra clay is very strong even with those big cracks in it. This is surprising. Even the clay and rice hulls are holding my weight. This one is not nearly as strong. You can see the corner broke away as I picked it up, but still it has pretty good shear value. This is good news because the clay and rice hull block is passing the shear test. This is one of my favorite samples. It has a real good look and feel (its lighter weight and has insulation). This is the vetiver clay with rice hulls. Its one of the best blocks. It passed the shear test. This is the adobe block. Its passed the shear test even though there were some cracks formed in it when I was making it.
[Drop test.] Note: the first three samples pass the drop test. The earthbag made with clay and extra vetiver did not pass the test. Both halves split apart, probably because there wasnt enough clay to hold them together.
[Cutting the bags open to inspect the core.] This is the bag with road base and extra clay. It looks almost like concrete even though the ends were not constrained. Its a very solid mix. It looks very good. This looks better than what we were using (entirely road base). The extra clay seems to make it stronger. [Note: extra clay soil was added, not clay.] This is the clay with extra rice hulls. This is good insulation, but yet it has a good solid feel to it. [Note: this turns out to be the strongest sample in this test.] This sample has clay and rice hulls, and you can see its still solid. So it has some insulation and still looks good. This one here has more rice hulls.
[Drop test continued with earthbag samples.] Very good! No damage at all. It feels like a rock. [This is the earthbag with clay and some rice hulls that appears to be the strongest sample in this test.] No damage. This crack was there when it was made. No damage to this one either. Whoa! This was the road base with extra clay. It just busted apart. This is the road base with extra clay [second sample to confirm results]. Obviously its crumbly. Earth Block Testing](https://i.ytimg.com/vi/avQ4XxmZ07Q/mqdefault.jpg)






