Uploaded November 2021 | Updated November 2026, 2 hours ago
Changing the duration of the intake and exhaust events on the fly with the lever. It can go from 180 to 240 degrees of duration on the intake and about 180 to 220 degrees on the exhaust. It's the same concept that was used on the 90's Rover K-series engine, but applied to a rotary valve. A lot of math went into figuring out the geometry for this and several fixes to improve the durability of the variable speed drive.
While the crank is rotating at a constant speed, the camshaft changes its rotational velocity to speed up and slow down at different portions of the 4 stroke cycle to adjust the flow and timing.
Changing the duration of the intake and exhaust events on the fly with the lever. It can go from 180 to 240 degrees of duration on the intake and about 180 to 220 degrees on the exhaust. It's the same concept that was used on the 90's Rover K-series engine, but applied to a rotary valve. A lot of math went into figuring out the geometry for this and several fixes to improve the durability of the variable speed drive.
While the crank is rotating at a constant speed, the camshaft changes its rotational velocity to speed up and slow down at different portions of the 4 stroke cycle to adjust the flow and timing.










