Uploaded July 2017 | Updated November 2026, 2 hours ago
Pushing the engine a bit harder. Now has over 30 miles on it. Installed the cooling fan after cutting it down to size, which has helped tremendously. Re-glued the intake with LORD 406/19 acrylic adhesive, which should permanently fix our primary intake leak path. It now holds almost 5" of vacuum at idle (~800 rpm).
Working on getting the car inspected and getting some ECU tuning software compatible with the stock OBDII setup.
Pushing the engine a bit harder. Now has over 30 miles on it. Installed the cooling fan after cutting it down to size, which has helped tremendously. Re-glued the intake with LORD 406/19 acrylic adhesive, which should permanently fix our primary intake leak path. It now holds almost 5" of vacuum at idle (~800 rpm).
Working on getting the car inspected and getting some ECU tuning software compatible with the stock OBDII setup.










