Uploaded September 2023 | Updated September 2026, 1 week ago
I cut rocks and used them to make a bench. I bought a couple of rocks for about $8 each and the cut one side of the rocks to make them flat. I used an angle grinder with a diamond blade meant for tile and granite. I had a leftover piece of a 6by12 beam from the construction of my new house. These beams are 5-1/2" by 11-1/4" in the cross section. I carved the wood with a saw and machete at first before power carving curves with an angle grinder and a Holey Galahad Carving disk.
Product Links (amazon affiliate links)
Holey Galahad Wood Carving Wheel
amzn.to/48qxlvx
4-1/2" Stone Grinding Convex Wheel
amzn.to/3PNN3cJ
Follow us on Instagram: instagram.com/benjaminuyeda
For additional projects and information check out our website:
homemade-modern.com
I cut rocks and used them to make a bench. I bought a couple of rocks for about $8 each and the cut one side of the rocks to make them flat. I used an angle grinder with a diamond blade meant for tile and granite. I had a leftover piece of a 6by12 beam from the construction of my new house. These beams are 5-1/2" by 11-1/4" in the cross section. I carved the wood with a saw and machete at first before power carving curves with an angle grinder and a Holey Galahad Carving disk.
Product Links (amazon affiliate links)
Holey Galahad Wood Carving Wheel
amzn.to/48qxlvx
4-1/2" Stone Grinding Convex Wheel
amzn.to/3PNN3cJ
Follow us on Instagram: instagram.com/benjaminuyeda
For additional projects and information check out our website:
homemade-modern.com
