Mark Lindsay CNC | Using Offsets Within Job Setup in Vectric Software @MarkLindsayCNC | Uploaded 2 weeks ago | Updated 3 hours ago
More down here ↓↓↓ Click MORE!
In this video, I’ll demonstrate the use of the Use Offsets option within the Job Setup form in Vectric software.
I’ll show you a project that required that I offset the X and Y zero 3 inches each. I’ll show you how I offset the material within the Job Setup form, then show you what that looks like within the software. I’ll then show you how that worked on my CNC router when I ran the G-code. Finally, I’ll wrap up the video with a brief discussion of other applications for using these offsets.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
On Sunday, September 29th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: youtube.com/live/ouwaua7UBus
Link to my video Introduction to Work and Fixture Offsets: youtu.be/qo0h4Jdp-AQ
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/MarkLindsayCNC
Thank you very much!
______________________________________________________________________________
Link to the Vectric Version 12+ for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRMFBT-TzIbMyGtuBurt8GCQ
Link to the Vectric for the Absolute Beginner Playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Vectric #VCarvePro #Aspire
More down here ↓↓↓ Click MORE!
In this video, I’ll demonstrate the use of the Use Offsets option within the Job Setup form in Vectric software.
I’ll show you a project that required that I offset the X and Y zero 3 inches each. I’ll show you how I offset the material within the Job Setup form, then show you what that looks like within the software. I’ll then show you how that worked on my CNC router when I ran the G-code. Finally, I’ll wrap up the video with a brief discussion of other applications for using these offsets.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
On Sunday, September 29th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: youtube.com/live/ouwaua7UBus
Link to my video Introduction to Work and Fixture Offsets: youtu.be/qo0h4Jdp-AQ
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/MarkLindsayCNC
Thank you very much!
______________________________________________________________________________
Link to the Vectric Version 12+ for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRMFBT-TzIbMyGtuBurt8GCQ
Link to the Vectric for the Absolute Beginner Playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Vectric #VCarvePro #Aspire
