Uploaded August 2024 | Updated November 2026, 2 days ago
Vectric V12+ for the Absolute Beginner - Part 4 – Tabs, G-Code, Separate Last Pass
More down here ↓↓↓ Click MORE!
This is the fourth in a series of videos geared toward the person who has never worked with CAD or CAM software before. In this video, we’ll get into some of the features within the Pocket toolpath, and the Profile toolpath for the absolute beginner.
I’ll go back into the Pocket toolpath and explain Ramping Plunge Moves, and the Pocket Allowance. I’ll then go into the Profile toolpath, and I’ll demonstrate Do a Separate Last Pass in conjunction with Adding Ramps. I’ll demonstrate how to add, move, and delete Tabs within the Profile toolpath. Then we’ll get into Saving the G-Code needed to actually run the file on the CNC router.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
On Sunday, August 18th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: youtube.com/live/ynYCWnkK6Zw
Link to Part 3 of this series: youtu.be/jHxmiBPm0Aw
Link to the Vectric Version 12+ for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRMFBT-TzIbMyGtuBurt8GCQ
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/MarkLindsayCNC
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc.com/index.php/product-category/logo-products
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
vectric.com
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Vectric #VCarvePro #Aspire
Vectric V12+ for the Absolute Beginner - Part 4 – Tabs, G-Code, Separate Last Pass
More down here ↓↓↓ Click MORE!
This is the fourth in a series of videos geared toward the person who has never worked with CAD or CAM software before. In this video, we’ll get into some of the features within the Pocket toolpath, and the Profile toolpath for the absolute beginner.
I’ll go back into the Pocket toolpath and explain Ramping Plunge Moves, and the Pocket Allowance. I’ll then go into the Profile toolpath, and I’ll demonstrate Do a Separate Last Pass in conjunction with Adding Ramps. I’ll demonstrate how to add, move, and delete Tabs within the Profile toolpath. Then we’ll get into Saving the G-Code needed to actually run the file on the CNC router.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
On Sunday, August 18th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: youtube.com/live/ynYCWnkK6Zw
Link to Part 3 of this series: youtu.be/jHxmiBPm0Aw
Link to the Vectric Version 12+ for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRMFBT-TzIbMyGtuBurt8GCQ
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/MarkLindsayCNC
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist (Versions 11.5 and older): youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc.com/index.php/product-category/logo-products
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
vectric.com
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Vectric #VCarvePro #Aspire










