Uploaded December 2025 | Updated September 2026, 2 weeks ago
This is the 2nd Video in a series of how to use @vectric Easy Create software to make 3D reliefs. This video is focused on taking a 3d relief that was created in Easy Create using a prompt and creating an actual carving in vCarve. Although this video will make an ornament the same processes can be used to many 3d carved projects.
Additional videos will provide insights on other Easy Create tools and how to take projects developed in Easy Create and use them to create beautiful pieces.
The playlist for this series of videos is located here: youtube.com/playlist?list=PLbuKRLARGPOwKWzcp89t0oBkna9OGhmFO
If you have not already seen the first video on how to Use Easy Create to Prompt and Create a 3D Relief Model you may want to watch this video first or after this video: youtu.be/n4la0mEGyC0
In this step-by-step tutorial, I walk you through how to take a 3D relief created in Easy Create and do the following in vCarve Pro:
👊 Bring the relief model into vCarve Pro
👊 Use clipping to exclude part of the model that will be used
👊 How to adjust the model for optimum carving
👊 How to setup the toolpaths to get the best results while carving the model
👉 Chapters
00:00 Introduction to Video
01:00 Bringing in the Easy Create Relief into vCarve Pro
02:50 Clipping the Relief Model to Fit the Ornament Design
04:25 Scaling the model for best definition
06:00 Organizing the Model and Levels
07:30 Organizing Layers
08:45 Proper Placement of Model in Material
09:20 Setting up Toolpaths
20:55 Carving the Model and Discussion of Carving Time
💬 Leave a comment if you have questions or want to see more advanced toolpath tutorials.
💬 Leave a comment if you think a live where I discuss and answer specific Easy Create and VistaSculpt software would be helpful.
🔔 Subscribe for more CNC and woodworking tips: [Your Channel URL]
🌐 Visit my website for custom projects & tutorials: robsandstromdesigns.com
This video is not sponsored. The following links may be affiliate links. By using these links you are supporting this channel.
Bits Used:
Following Bits are from RIP Precision Tools ripprecisiontools.com/?ref=692c5q8z
Referral Code (5% discount): ROBSANDSTROM
➡️ 1/4" Ballnose from Rip Precision Tools: RIP Precission Tools: 1/4" Ball Nose - 1/4" Cut Dia. - 1" Flute Length - 1/4" Shank - 4 Flute SKU: BN-25010H45F4
➡️ 1/8" Tapered Ballnose: SKU: TBN-12520F4
Cadence Manufacturing Tools: 1/16" TBN Skinny Jenny Link: cadencemfgdesign.com/product-page/coming-soon-p-n-8675309-sj-skinny-jenny
Amana 46280K 1/32" TBN: amzn.to/4pbvF0M
Cutting it Close 1/8" Downcut Bit: cicworkshop.com/products/1-8x1-2-downcut-spiral-endmill-1-4-shank-srd203?_pos=1&_psq=1%2F8&_ss=e&_v=1.0&sca_ref=7158192.YJVxMOI6w9sj
=========================================
Equipment and Software I Use
=========================================
Equipment:
Laguna IQ CNC
CNC Easy Create Software: easycreate.vectric.com
Vectric: vCarve Pro
Editing Software:
=== Camtasia: amzn.to/3TQv8nG
Camera: Sony a6700 amzn.to/3PALT3Q
DJIOsmo Pocket 3
Computer: MacBook Pro: amzn.to/3xhRTrO
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: instagram.com/robsandstrom
Facebook: facebook.com/robsandstrom1
This is the 2nd Video in a series of how to use @vectric Easy Create software to make 3D reliefs. This video is focused on taking a 3d relief that was created in Easy Create using a prompt and creating an actual carving in vCarve. Although this video will make an ornament the same processes can be used to many 3d carved projects.
Additional videos will provide insights on other Easy Create tools and how to take projects developed in Easy Create and use them to create beautiful pieces.
The playlist for this series of videos is located here: youtube.com/playlist?list=PLbuKRLARGPOwKWzcp89t0oBkna9OGhmFO
If you have not already seen the first video on how to Use Easy Create to Prompt and Create a 3D Relief Model you may want to watch this video first or after this video: youtu.be/n4la0mEGyC0
In this step-by-step tutorial, I walk you through how to take a 3D relief created in Easy Create and do the following in vCarve Pro:
👊 Bring the relief model into vCarve Pro
👊 Use clipping to exclude part of the model that will be used
👊 How to adjust the model for optimum carving
👊 How to setup the toolpaths to get the best results while carving the model
👉 Chapters
00:00 Introduction to Video
01:00 Bringing in the Easy Create Relief into vCarve Pro
02:50 Clipping the Relief Model to Fit the Ornament Design
04:25 Scaling the model for best definition
06:00 Organizing the Model and Levels
07:30 Organizing Layers
08:45 Proper Placement of Model in Material
09:20 Setting up Toolpaths
20:55 Carving the Model and Discussion of Carving Time
💬 Leave a comment if you have questions or want to see more advanced toolpath tutorials.
💬 Leave a comment if you think a live where I discuss and answer specific Easy Create and VistaSculpt software would be helpful.
🔔 Subscribe for more CNC and woodworking tips: [Your Channel URL]
🌐 Visit my website for custom projects & tutorials: robsandstromdesigns.com
This video is not sponsored. The following links may be affiliate links. By using these links you are supporting this channel.
Bits Used:
Following Bits are from RIP Precision Tools ripprecisiontools.com/?ref=692c5q8z
Referral Code (5% discount): ROBSANDSTROM
➡️ 1/4" Ballnose from Rip Precision Tools: RIP Precission Tools: 1/4" Ball Nose - 1/4" Cut Dia. - 1" Flute Length - 1/4" Shank - 4 Flute SKU: BN-25010H45F4
➡️ 1/8" Tapered Ballnose: SKU: TBN-12520F4
Cadence Manufacturing Tools: 1/16" TBN Skinny Jenny Link: cadencemfgdesign.com/product-page/coming-soon-p-n-8675309-sj-skinny-jenny
Amana 46280K 1/32" TBN: amzn.to/4pbvF0M
Cutting it Close 1/8" Downcut Bit: cicworkshop.com/products/1-8x1-2-downcut-spiral-endmill-1-4-shank-srd203?_pos=1&_psq=1%2F8&_ss=e&_v=1.0&sca_ref=7158192.YJVxMOI6w9sj
=========================================
Equipment and Software I Use
=========================================
Equipment:
Laguna IQ CNC
CNC Easy Create Software: easycreate.vectric.com
Vectric: vCarve Pro
Editing Software:
=== Camtasia: amzn.to/3TQv8nG
Camera: Sony a6700 amzn.to/3PALT3Q
DJIOsmo Pocket 3
Computer: MacBook Pro: amzn.to/3xhRTrO
====================
Connect with me !
====================
Website: robsandstromdesigns.com
Instagram: instagram.com/robsandstrom
Facebook: facebook.com/robsandstrom1
