Uploaded January 2022 | Updated September 2026, 6 hours ago
My prototype for the new redesigned C-130 Hercules model is ready for test flight. This swill be painted black and camouflage like the early gunships with three bladed props. It has been printed from PCTG which is a great new material. I used 0,4 mm perimeter for the prototype and it's about 250 g heavier than the old version that I printed from 0,25 mm extrusion width. 0,3 is probably the best choice for the new model, or LW-PLA at 0,4 mm.
My prototype for the new redesigned C-130 Hercules model is ready for test flight. This swill be painted black and camouflage like the early gunships with three bladed props. It has been printed from PCTG which is a great new material. I used 0,4 mm perimeter for the prototype and it's about 250 g heavier than the old version that I printed from 0,25 mm extrusion width. 0,3 is probably the best choice for the new model, or LW-PLA at 0,4 mm.
