Uploaded October 2026 | Updated November 2026, 2 days ago
Saving the player's position is the easy part. The moment a player opens a chest, picks up a coin or drops a crate, the level itself has to be saved too, and that is where save systems get hard.
Universal Save System saves the whole world. Add the USS Save component to an actor and its position and every variable you mark SaveGame are saved, on the actor and on its components. Load World opens the saved level and puts it all back: actors spawned while playing are recreated, level actors that were destroyed stay destroyed, and references between saved actors reconnect.
In this video: a small level with chests, coins and crates spawned while playing. F5 saves it, the level gets changed, F9 loads it, and everything is back as it was. Then what it took: one component, one tick box and two nodes. Version 1.0, the first release, for Unreal Engine 5.4 to 5.8, in Blueprint and C++.
────────────────────────────────────────
🧩 GET IT
────────────────────────────────────────
► Universal Save System on FAB, in the AssetPro store: fab.com/sellers/AssetPro
► Free Playable Demo + Member Access: patreon.com/CodeLikeMe/posts/free-playable-171948473
► Discord Community: discord.gg/jRhvJtw5r5
────────────────────────────────────────
💾 WHAT IS IN IT
────────────────────────────────────────
✔ Location, rotation and scale of every actor with the USS Save component
✔ Every SaveGame variable, on the actor and on its components
✔ Structs saved whole, Blueprint structs included; arrays, sets and maps
✔ References between saved actors reconnect after a load; asset, class and soft references are kept
✔ Actors spawned while playing are recreated; destroyed level actors stay destroyed
✔ The player's pawn, controller and player state, the game mode and the game state are matched, never duplicated
✔ Streaming sublevels keep their state
✔ Save World and Load World: one node each, plus async nodes that write and read the file off the game thread
✔ Does Save Exist, Delete Save and Get Save Info, for a Continue button or a slot list
✔ Capture World and Restore World: the world as an array of bytes, for save slots of your own
✔ A save is never half-written, and every save carries a checksum
✔ Add or remove SaveGame variables in a game update: old saves still load
✔ Save Version and On Migrate convert old values when an update needs it
✔ Events in Blueprint or C++: On Pre Save, On Post Load, On Migrate
✔ Tested: 370 automated checks pass on every engine version from 5.4 to 5.8
────────────────────────────────────────
⚙️ QUICK START
────────────────────────────────────────
1. Enable the plugin
2. Add the USS Save component to the actors to keep
3. Tick SaveGame on the variables to keep (in the variable's Details, under Advanced)
4. Apply the loaded values in On Post Load
5. Call Save World and Load World on the USS Save Subsystem
────────────────────────────────────────
📋 WHAT IT IS NOT
────────────────────────────────────────
✘ Not multiplayer: it saves the local world
✘ Not a menu or a slot screen: it saves and loads, your UI decides when
✘ One level per save: the level being played, with its streaming sublevels
✘ World Partition levels are not tested
✘ Saves are not compressed or encrypted
✘ Runtime attachment and physics velocity are not saved
✘ The demo level in this video (chests, coins, crates) is not in the plugin: it is code only, with no content
────────────────────────────────────────
🔧 REQUIREMENTS
────────────────────────────────────────
► Unreal Engine 5.4 to 5.8
► Windows
► No other plugins, no third-party code
► Full C++ source included
────────────────────────────────────────
🎮 SUPPORT & COMMUNITY
────────────────────────────────────────
► Discord: discord.gg/jRhvJtw5r5
► Patreon: patreon.com/cw/CodeLikeMe
► Subscribe: youtube.com/codelikeme
#UnrealEngine #UE5 #GameDev #SaveSystem #SaveGame #Blueprints #UnrealEngine5 #IndieDev #GameDevelopment #UE5Plugin
00:00 A level the player changes, then Save World
00:12 The world changes, then Load World puts it back
00:23 What it took: one component, one tick box, two nodes
Saving the player's position is the easy part. The moment a player opens a chest, picks up a coin or drops a crate, the level itself has to be saved too, and that is where save systems get hard.
Universal Save System saves the whole world. Add the USS Save component to an actor and its position and every variable you mark SaveGame are saved, on the actor and on its components. Load World opens the saved level and puts it all back: actors spawned while playing are recreated, level actors that were destroyed stay destroyed, and references between saved actors reconnect.
In this video: a small level with chests, coins and crates spawned while playing. F5 saves it, the level gets changed, F9 loads it, and everything is back as it was. Then what it took: one component, one tick box and two nodes. Version 1.0, the first release, for Unreal Engine 5.4 to 5.8, in Blueprint and C++.
────────────────────────────────────────
🧩 GET IT
────────────────────────────────────────
► Universal Save System on FAB, in the AssetPro store: fab.com/sellers/AssetPro
► Free Playable Demo + Member Access: patreon.com/CodeLikeMe/posts/free-playable-171948473
► Discord Community: discord.gg/jRhvJtw5r5
────────────────────────────────────────
💾 WHAT IS IN IT
────────────────────────────────────────
✔ Location, rotation and scale of every actor with the USS Save component
✔ Every SaveGame variable, on the actor and on its components
✔ Structs saved whole, Blueprint structs included; arrays, sets and maps
✔ References between saved actors reconnect after a load; asset, class and soft references are kept
✔ Actors spawned while playing are recreated; destroyed level actors stay destroyed
✔ The player's pawn, controller and player state, the game mode and the game state are matched, never duplicated
✔ Streaming sublevels keep their state
✔ Save World and Load World: one node each, plus async nodes that write and read the file off the game thread
✔ Does Save Exist, Delete Save and Get Save Info, for a Continue button or a slot list
✔ Capture World and Restore World: the world as an array of bytes, for save slots of your own
✔ A save is never half-written, and every save carries a checksum
✔ Add or remove SaveGame variables in a game update: old saves still load
✔ Save Version and On Migrate convert old values when an update needs it
✔ Events in Blueprint or C++: On Pre Save, On Post Load, On Migrate
✔ Tested: 370 automated checks pass on every engine version from 5.4 to 5.8
────────────────────────────────────────
⚙️ QUICK START
────────────────────────────────────────
1. Enable the plugin
2. Add the USS Save component to the actors to keep
3. Tick SaveGame on the variables to keep (in the variable's Details, under Advanced)
4. Apply the loaded values in On Post Load
5. Call Save World and Load World on the USS Save Subsystem
────────────────────────────────────────
📋 WHAT IT IS NOT
────────────────────────────────────────
✘ Not multiplayer: it saves the local world
✘ Not a menu or a slot screen: it saves and loads, your UI decides when
✘ One level per save: the level being played, with its streaming sublevels
✘ World Partition levels are not tested
✘ Saves are not compressed or encrypted
✘ Runtime attachment and physics velocity are not saved
✘ The demo level in this video (chests, coins, crates) is not in the plugin: it is code only, with no content
────────────────────────────────────────
🔧 REQUIREMENTS
────────────────────────────────────────
► Unreal Engine 5.4 to 5.8
► Windows
► No other plugins, no third-party code
► Full C++ source included
────────────────────────────────────────
🎮 SUPPORT & COMMUNITY
────────────────────────────────────────
► Discord: discord.gg/jRhvJtw5r5
► Patreon: patreon.com/cw/CodeLikeMe
► Subscribe: youtube.com/codelikeme
#UnrealEngine #UE5 #GameDev #SaveSystem #SaveGame #Blueprints #UnrealEngine5 #IndieDev #GameDevelopment #UE5Plugin
00:00 A level the player changes, then Save World
00:12 The world changes, then Load World puts it back
00:23 What it took: one component, one tick box, two nodes



![Multiplayer & Passengers — Starship V1.1 for UE5
Starship V1.1 just shipped on Patreon and Fab - adding full multiplayer, passengers , and auto-seat at takeoff to the pilotable spaceship plugin for UE5.
Existing V1.0 buyers get V1.1 as a free auto-update once Fab approves.
──────────────────────────────
🚀 GET STARSHIP
──────────────────────────────
► Fab: https://www.fab.com/listings/3f2e3b36-eb5f-468d-a47a-6e378ddefdbf
► Free Demo + Project: https://www.patreon.com/CodeLikeMe/posts/starship-v1-1-163268734
► Discord: https://discord.gg/jRhvJtw5r5
──────────────────────────────
🛠️ WHATS NEW IN V1.1
──────────────────────────────
✔ Full multiplayer — client-authoritative flight, server-authoritative possession & seating. Listen and dedicated servers. No changes to your Character or PlayerController.
✔ Passengers — up to MaxPassengers ride welded to the hull with movement and collision frozen. Seated stow mirrored on every machine.
✔ Auto-seat player pawns at takeoff — any player standing on the hull or in the boarding volume when the ship lifts off is seated automatically. Walk-on riders dont get left behind.
✔ Passenger board/leave prompt — same key-aware prompt system as the pilot flow. Press [key] to board when overlapping a piloted ship.
✔ NPC passengers (scripted) — BoardPassenger(Passenger) / UnboardPassenger(Passenger, bForce) server functions accept any pawn. Script AI crew via Blueprint (not auto-detected).
✔ Mid-flight bailout option — bPassengerExitRequiresLanded toggle (default true) keeps riders aboard until landed. Turn off for jetpack characters or emergency ejections.
✔ Runtime-injected UStarshipRiderComponent — passengers command a ship they dont own without character edits or owning-connection juggling.
✔ Movable interaction volume — repositionable in Blueprint to match your ship geometry.
✔ Local pilot/passenger events — On Local Pilot Begin/End and On Local Passenger Begin/End for HUDs that live only on the piloting/riding client.
✔ Smooth proxy interpolation — non-simulating machines chase the replicated transform via ProxySmoothingSpeed.
──────────────────────────────
🌌 STARSHIP FEATURES
──────────────────────────────
✔ 6DOF anti-gravity flight with four auto-detected states
✔ Complete walk-up, board, fly, land, disembark loop
✔ Gravity-agnostic — works with world gravity or GravityCore
✔ Full C++ source with Blueprint integration
✔ Ready-to-fly BP_Starship with lander mesh, engine FX, sound
✔ UE 5.4 - 5.8 supported
──────────────────────────────
🌍 SPACE TOOLKIT
──────────────────────────────
Starship pairs with PlanetGen and GravityCore for complete space gameplay.
► PlanetGen: https://www.fab.com/listings/96c36654-f244-4c75-a527-cfaaab2d5ac4
► GravityCore: https://www.fab.com/listings/c74de757-8cf8-45ff-9d6e-82d3b421af5b
──────────────────────────────
🎮 SUPPORT
──────────────────────────────
► Discord: https://discord.gg/jRhvJtw5r5
► Patreon: https://www.patreon.com/cw/CodeLikeMe
► Subscribe: https://www.youtube.com/codelikeme
#UnrealEngine #UE5 #GameDev #Starship #Multiplayer #UE5Plugin #SpaceGame #NetworkReplication Multiplayer & Passengers — Starship V1.1 for UE5](https://i.ytimg.com/vi/6ZeE7guykSo/mqdefault.jpg)






