Uploaded November 2026 | Updated November 2026, 2 days ago
A rover driving round a 50 metre planet, and Unreal's template Chaos car on the same planet with one GravityCore component. GravityCore's vehicles on every gravity shape: a planet, both sides of a ring, a flat pad and a wall, chained over a bridge.
The Gravity Rover is a ready-made pawn on four trace wheels, with no Chaos Vehicles and no extra plugins: drop it into a gravity volume and drive. Each wheel sizes its spring from the gravity under it, so it needs no retuning per planet. For a Chaos car you have already tuned, the Gravity Vehicle component pulls it to the field and keeps it upright.
New in GravityCore 1.6, out now on Fab, along with the Gravity Rover Demo map to try.
────────────────────────────────────────
🧩 GET IT
────────────────────────────────────────
► GravityCore on FAB: fab.com/listings/c74de757-8cf8-45ff-9d6e-82d3b421af5b
► Try the Playable Demo: patreon.com/CodeLikeMe/posts/174081106
► PlanetGen on FAB (streaming procedural planets): fab.com/listings/96c36654-f244-4c75-a527-cfaaab2d5ac4
► Starship on FAB (a flyable starship): fab.com/listings/3f2e3b36-eb5f-468d-a47a-6e378ddefdbf
► SpaceKit on FAB (a multiplayer space game template): fab.com/listings/bd94c4cc-f603-493a-86dc-8f53e883e24f
► Discord Community: discord.gg/jRhvJtw5r5
────────────────────────────────────────
🚙 WHAT IS IN IT
────────────────────────────────────────
✔ Gravity Rover: a simulating box on four Gravity Wheel components plus a Gravity Vehicle component. No Chaos Vehicles, no Character Movement Component, no extra plugins
✔ W and S drive, brake and reverse; A and D steer; Space or the bottom gamepad button is the handbrake, and the back end steps out
✔ Every gravity shape: a Sphere planet, the inside of a Cylinder ring, the outside of a ring with Invert Gravity on, a Box pad, and the same Box rotated into a wall
✔ Zones that chain: off the planet, over a bridge and into a ring. Where volumes overlap, the highest Priority wins
✔ No snap at a zone change: a 31 degree step in gravity settles in about 0.3 s, and the camera eases after it
✔ Suspension from the field: each wheel sizes its spring from the rover's mass and the gravity under it. Across a 12.5x range of gravity, ride height moved less than a centimetre in our test
✔ Self-righting: flip the rover onto its roof and the Gravity Vehicle component turns it back to gravity's up, on its wheels in about 0.7 s
✔ Debug draw: strut lines, wheel load and the gravity up arrow
✔ Your Chaos car on a planet: one Gravity Vehicle component, at its defaults, holds it on the planet, the pad, the wall and both rings, and turns it upright in under a second
✔ Found by class name, so GravityCore still builds with Chaos Vehicles switched off
✔ A Begin Play check that warns when a Chaos car's field and world gravity differ by more than 20 percent
────────────────────────────────────────
⚙️ QUICK START
────────────────────────────────────────
1. Rover: search Gravity Rover in Quick Add, drop it into any gravity volume, possess it and press Play
2. Your Chaos car: add a Gravity Vehicle component to the car's Blueprint
3. Chase camera: on the chase spring arm, turn on Inherit Pitch and Inherit Roll
4. Suspension: if the Begin Play warning appears, retune that car's suspension for the planet
────────────────────────────────────────
📋 WHAT IT IS NOT
────────────────────────────────────────
✘ The sports car is Unreal's own vehicle template, not part of GravityCore
✘ The grid surfaces, props and parked vehicles are a dressed copy of the demo map; the map in the plugin is plainer
✘ A Chaos car's springs don't adapt to the field: retune them for a planet much heavier or lighter than world gravity. The rover has no such limit
✘ No jump, boost or reset on the rover, and no getting in and out: the character and the rover are separate pawns
✘ Multiplayer driving isn't shown; GravityCore's multiplayer covers characters and the shooter
────────────────────────────────────────
🔧 REQUIREMENTS
────────────────────────────────────────
✔ Unreal Engine 5.4, 5.5, 5.6, 5.7 or 5.8
✔ The Chaos Vehicles plugin only for your own Chaos car; the rover doesn't need it
────────────────────────────────────────
🎮 SUPPORT & COMMUNITY
────────────────────────────────────────
► Discord: discord.gg/jRhvJtw5r5
► Patreon: patreon.com/cw/CodeLikeMe
► Subscribe: youtube.com/codelikeme
0:00 Hook
0:18 Two ways to drive
0:30 Place it and drive
1:06 Every gravity shape
2:15 How it holds on
2:53 Bridge
3:03 Add one component
3:59 Lands on its roof
4:11 Get it right: camera
4:36 Get it right: suspension
5:12 Wrap
#UnrealEngine #UE5 #GameDev #GravityCore #CustomGravity #PlanetGravity #VehiclePhysics #ChaosVehicles #IndieDev #CodeLikeMe
A rover driving round a 50 metre planet, and Unreal's template Chaos car on the same planet with one GravityCore component. GravityCore's vehicles on every gravity shape: a planet, both sides of a ring, a flat pad and a wall, chained over a bridge.
The Gravity Rover is a ready-made pawn on four trace wheels, with no Chaos Vehicles and no extra plugins: drop it into a gravity volume and drive. Each wheel sizes its spring from the gravity under it, so it needs no retuning per planet. For a Chaos car you have already tuned, the Gravity Vehicle component pulls it to the field and keeps it upright.
New in GravityCore 1.6, out now on Fab, along with the Gravity Rover Demo map to try.
────────────────────────────────────────
🧩 GET IT
────────────────────────────────────────
► GravityCore on FAB: fab.com/listings/c74de757-8cf8-45ff-9d6e-82d3b421af5b
► Try the Playable Demo: patreon.com/CodeLikeMe/posts/174081106
► PlanetGen on FAB (streaming procedural planets): fab.com/listings/96c36654-f244-4c75-a527-cfaaab2d5ac4
► Starship on FAB (a flyable starship): fab.com/listings/3f2e3b36-eb5f-468d-a47a-6e378ddefdbf
► SpaceKit on FAB (a multiplayer space game template): fab.com/listings/bd94c4cc-f603-493a-86dc-8f53e883e24f
► Discord Community: discord.gg/jRhvJtw5r5
────────────────────────────────────────
🚙 WHAT IS IN IT
────────────────────────────────────────
✔ Gravity Rover: a simulating box on four Gravity Wheel components plus a Gravity Vehicle component. No Chaos Vehicles, no Character Movement Component, no extra plugins
✔ W and S drive, brake and reverse; A and D steer; Space or the bottom gamepad button is the handbrake, and the back end steps out
✔ Every gravity shape: a Sphere planet, the inside of a Cylinder ring, the outside of a ring with Invert Gravity on, a Box pad, and the same Box rotated into a wall
✔ Zones that chain: off the planet, over a bridge and into a ring. Where volumes overlap, the highest Priority wins
✔ No snap at a zone change: a 31 degree step in gravity settles in about 0.3 s, and the camera eases after it
✔ Suspension from the field: each wheel sizes its spring from the rover's mass and the gravity under it. Across a 12.5x range of gravity, ride height moved less than a centimetre in our test
✔ Self-righting: flip the rover onto its roof and the Gravity Vehicle component turns it back to gravity's up, on its wheels in about 0.7 s
✔ Debug draw: strut lines, wheel load and the gravity up arrow
✔ Your Chaos car on a planet: one Gravity Vehicle component, at its defaults, holds it on the planet, the pad, the wall and both rings, and turns it upright in under a second
✔ Found by class name, so GravityCore still builds with Chaos Vehicles switched off
✔ A Begin Play check that warns when a Chaos car's field and world gravity differ by more than 20 percent
────────────────────────────────────────
⚙️ QUICK START
────────────────────────────────────────
1. Rover: search Gravity Rover in Quick Add, drop it into any gravity volume, possess it and press Play
2. Your Chaos car: add a Gravity Vehicle component to the car's Blueprint
3. Chase camera: on the chase spring arm, turn on Inherit Pitch and Inherit Roll
4. Suspension: if the Begin Play warning appears, retune that car's suspension for the planet
────────────────────────────────────────
📋 WHAT IT IS NOT
────────────────────────────────────────
✘ The sports car is Unreal's own vehicle template, not part of GravityCore
✘ The grid surfaces, props and parked vehicles are a dressed copy of the demo map; the map in the plugin is plainer
✘ A Chaos car's springs don't adapt to the field: retune them for a planet much heavier or lighter than world gravity. The rover has no such limit
✘ No jump, boost or reset on the rover, and no getting in and out: the character and the rover are separate pawns
✘ Multiplayer driving isn't shown; GravityCore's multiplayer covers characters and the shooter
────────────────────────────────────────
🔧 REQUIREMENTS
────────────────────────────────────────
✔ Unreal Engine 5.4, 5.5, 5.6, 5.7 or 5.8
✔ The Chaos Vehicles plugin only for your own Chaos car; the rover doesn't need it
────────────────────────────────────────
🎮 SUPPORT & COMMUNITY
────────────────────────────────────────
► Discord: discord.gg/jRhvJtw5r5
► Patreon: patreon.com/cw/CodeLikeMe
► Subscribe: youtube.com/codelikeme
0:00 Hook
0:18 Two ways to drive
0:30 Place it and drive
1:06 Every gravity shape
2:15 How it holds on
2:53 Bridge
3:03 Add one component
3:59 Lands on its roof
4:11 Get it right: camera
4:36 Get it right: suspension
5:12 Wrap
#UnrealEngine #UE5 #GameDev #GravityCore #CustomGravity #PlanetGravity #VehiclePhysics #ChaosVehicles #IndieDev #CodeLikeMe










