Uploaded April 2019 | Updated November 2026, 3 hours ago
This Rode M5 Microphone review looks at the RODE M5 pencil condenser microphones. Thanks to Rode making professional audio recordings has never been less expensive or easier according to many users.
Check price of Rode M5 on Sweetwater - imp.i114863.net/OqnEW
This may be just the solution that you need for your audio studio to save some money and get the sound that you are after.
The RODE mic has generated plenty of buzz for recording everything from guitar to vocals and everything in between.
If you are looking to add a mic set up to your music studio this may be just the thing you have been looking for to get that professional sound.
What Does the M5 Have to Offer?
According to the manufacturer these microphones are focused on delivering key quality attributes like a wide frequency range response and low noise.
Frankly, we already know that small diaphragm mics are already the best choice for choirs, ensembles and acoustic instruments but we were not sure if the pairing of these two mics were going to make such a huge impact.
The M5 was designed and developed in Australia. The M5 has a fixed cardioid with a half-inch capsule.
Since this type of mic is the best option for choirs, ensembles and acoustic instruments in stereo applications you can only buy them in pairs.
Rode’s ensures each customer that the variation between a paired set is never more than 1dB in sensitivity.
The Build
On the outside the microphone has Rode’s proprietary matte black ceramic coating. It is equally durable and good looking.
In the box you get the WS5 foam windshield and the stand mounts. Unfortunately, we were a little disappointed that there is no storage pouch or case. It is shipped in a carboard box with a foam liner.
While it was a little disappointing it of course, is not a deal breaker but pay attention Rode’s the details matter to many users, throw in a case with each set.
The circuitry inside the M5 has a J-FET impedance converter. It has a transformerless bipolar output. It helps to keep things nicely compact.
It has a 20hZ to 20kHz range.
The M5 does not have any filter switches or pads on the mic. The background noise is indiscernible on this mic with normal studio noise in the background.
The size is a great compact size at 100mm long with a nice compact diameter of 20mm. This slim profile allows it to work easily with any type of instrument.
One of the added benefits we liked about this mic setup is that once you register the product you get the 10 -year warranty with Rode.
That means you can depend on 10 years of function without the worry.
Testing
The acoustic guitar with the M5 deliver a nice detailed sound that is articulate. We used a single mic for the test and then we tried two. It was an excellent experience.
We got the forward sounding character that we wanted and could easily envision how this mic setup was going to be great with a wide range of instruments and vocals.
A strange test to get to the high frequency limits is to jangle some metal keys together and record them. This is not something that we did but it certainly is something that you can try to get to those high frequency limits.
Overall
We loved the performance of this setup and we can honestly say it is an option that would work in a wide range of studio setups.
When it comes to acoustic instruments it is hard to beat the flexibility that the M5 can offer.
The small size with the big function can capture a wide range of instruments.
They are super easy to position and would work great in any size space.
It can easily handle most any acoustic source and has a nice price tag to match.
Watch the demo, pick up some tips and tricks and let us know what your experience has been like with the M5. Ask questions and leave comments in the comment section below. Enjoy the video!
#consordini #rode #condensermic
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
This Rode M5 Microphone review looks at the RODE M5 pencil condenser microphones. Thanks to Rode making professional audio recordings has never been less expensive or easier according to many users.
Check price of Rode M5 on Sweetwater - imp.i114863.net/OqnEW
This may be just the solution that you need for your audio studio to save some money and get the sound that you are after.
The RODE mic has generated plenty of buzz for recording everything from guitar to vocals and everything in between.
If you are looking to add a mic set up to your music studio this may be just the thing you have been looking for to get that professional sound.
What Does the M5 Have to Offer?
According to the manufacturer these microphones are focused on delivering key quality attributes like a wide frequency range response and low noise.
Frankly, we already know that small diaphragm mics are already the best choice for choirs, ensembles and acoustic instruments but we were not sure if the pairing of these two mics were going to make such a huge impact.
The M5 was designed and developed in Australia. The M5 has a fixed cardioid with a half-inch capsule.
Since this type of mic is the best option for choirs, ensembles and acoustic instruments in stereo applications you can only buy them in pairs.
Rode’s ensures each customer that the variation between a paired set is never more than 1dB in sensitivity.
The Build
On the outside the microphone has Rode’s proprietary matte black ceramic coating. It is equally durable and good looking.
In the box you get the WS5 foam windshield and the stand mounts. Unfortunately, we were a little disappointed that there is no storage pouch or case. It is shipped in a carboard box with a foam liner.
While it was a little disappointing it of course, is not a deal breaker but pay attention Rode’s the details matter to many users, throw in a case with each set.
The circuitry inside the M5 has a J-FET impedance converter. It has a transformerless bipolar output. It helps to keep things nicely compact.
It has a 20hZ to 20kHz range.
The M5 does not have any filter switches or pads on the mic. The background noise is indiscernible on this mic with normal studio noise in the background.
The size is a great compact size at 100mm long with a nice compact diameter of 20mm. This slim profile allows it to work easily with any type of instrument.
One of the added benefits we liked about this mic setup is that once you register the product you get the 10 -year warranty with Rode.
That means you can depend on 10 years of function without the worry.
Testing
The acoustic guitar with the M5 deliver a nice detailed sound that is articulate. We used a single mic for the test and then we tried two. It was an excellent experience.
We got the forward sounding character that we wanted and could easily envision how this mic setup was going to be great with a wide range of instruments and vocals.
A strange test to get to the high frequency limits is to jangle some metal keys together and record them. This is not something that we did but it certainly is something that you can try to get to those high frequency limits.
Overall
We loved the performance of this setup and we can honestly say it is an option that would work in a wide range of studio setups.
When it comes to acoustic instruments it is hard to beat the flexibility that the M5 can offer.
The small size with the big function can capture a wide range of instruments.
They are super easy to position and would work great in any size space.
It can easily handle most any acoustic source and has a nice price tag to match.
Watch the demo, pick up some tips and tricks and let us know what your experience has been like with the M5. Ask questions and leave comments in the comment section below. Enjoy the video!
#consordini #rode #condensermic
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
![Accusonus Era 4 Bundle Review [Extended Version]
#consordini #accusonus #audioplugin
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Accusonus Era 4 Bundle Review [Extended Version]](https://i.ytimg.com/vi/M0kpQRWcsfQ/mqdefault.jpg)
![Basics of Audio Mastering a Song [Tutorial]
This tutorial is all about the basics of audio mastering using Studio One.
Making your Studio One practice more effective starts with understanding mixing fundamentals and watching this audio mastering tutorial!
Before you know it you will be mixing like a pro! Rap music mastering, hip-hop music mastering and more can start with learning how to mix hip-hop vocals in Studio One.
Studio One is a complete software (DAW) music production environment that makes any music studio more productive. It is the music technology that can put your mixes on the map.
This audio mastering demo will share with you tips and tricks to get more out of Studio One and produce like a pro.
There are a few things that are going to be assumed about you the viewer. 1. That you do have some experience in Studio One and 2 that you have some compression experience.
If you do not there will be a bit of a learning curve until you get some of that experience under your belt.
Home Recording Made Easy.
Lets start this music engineering tutorial with putting out that there are 2 ways of mastering, you can either master your song using the mastering output, or export your song and then put it back into Studio One and do it that way.
Mixing is easier when you export it into Studio One. I only say that because you will likely NOT mess with the mix when you are mastering if you take option 2!
With that out of the way lets get started. First tip is to cut your lows! Just try it, cut out everything below 40HZ. This will remove any of the frequencies that the human ear cannot pick up anyway.
Add the fruity EQ 2 and get rid of those lows that are taking up headroom.
There are 2 options for multiband compressors in Studio One. The Maximus compressor of the Fruity Compressor. The Maximus as the more advanced features so it comes highly recommended as the one to use.
Even with the advanced features Maximus is pretty straight forward to use. You have 3 bands low, mid and high, and you can set the frequency range in each band.
There is also a single band master compressor which allows additional control. You can bring all the bands together with the single band master.
You can decide where you want the band splits by soloing each band and moving over. You can view the compression of each band by using the monitor function.
You can have some fun by drawing the curves of each threshold on the graph. Try applying a harder compression on the low frequencies.
Add a little high end detail on the track by not compressing the high frequencies.
There is a lot you can do with compression that will not only clean up the track but add some great nuances and help you get that pro mix sound that you are after.
Try mixing in some saturation in Maximus as well. Harmonic excitement adds depth to your mix and is easy with Studio One and Maxims compression.
Once you have everything compressed the way you want it, it is time to move on to the EQ settings to get that perfect balance.
EQ boost is a great way to bring back some of the details that have been lost in error during compression.
Now EQ adjustment is not only necessary after compression, sometimes you hit the nail right on the head but if you think you do than you should definitely play around with the EQ.
So Much More.
You will have to watch the video to really get a feel for what you can do in Studio One and what you can do with relatively a small amount of experience.
Watch the video and take the tips and tricks that are shared in the video and apply them in your studio work and watch how your skill set will flourish.
You will master mixing before you know it. Leave comments below and share some of your work with us!
#consordini #audiomastering
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Basics of Audio Mastering a Song [Tutorial]](https://i.ytimg.com/vi/MFknoGEk3kI/mqdefault.jpg)
![How to Tune a Cello [Cello Lesson 3]
Thanks for watching How to Tune a Cello!
Recommended Cello for beginners - https://bit.ly/32amg06
Recommended Cello Bow - https://bit.ly/3l0Eyth
Recommended Cello Rosin - https://bit.ly/2BKkGJg
Learning how to tune a cello is one of the essential first steps in playing a cello. It’s a lot harder to play with the strings out of tune - and even harder if they aren’t even on the right pitch!
Standard tuning for the cello is listed above, ADGC (not to be confused with ACDC). Tuning the cello then is two parts: first, getting the string to the right pitch, and then, fine tuning it so it is resonantly “in tune.”
For the first, we need a tuner, or some sort of tuning reference. I like using an online piano to start, because it will sound more natural than a tuning pitch from, say, a metronome, and you can use it to check what note you’re already on.
Using our piano reference above, find a group of three black keys, and look at the two white keys in between the three black keys. The right one of these two keys is A - the same pitch class as your top (thinnest) A string.
By checking that we aren’t already too sharp, we can tune up carefully until we meet that pitch. The standard A tuning is A=440. This is one octave above the open A string, so cellists A’s are A=220.
If you have a tuning app, it will give you some visual reference of where you are, and what note the instrument is at. This can be helpful but also misleading.
For specific tuning we have to listen for absolute agreement of all of the little vibrations. It is more important to hear this even agreement of frequency than it is to be “mostly green” on a tuning app.
For this, we need our ears. That’s why in this video, I go over listening for the relationship of the fifths of the strings, which resonate at a 3:2 relationship.
Once you’ve tuned your A string, you tune the other strings by relating the fifths to each other.
This can take some time to get used to - but let it take time. It is all part of the process of learning music, learning your instrument, and listening better!
Some interesting tuning tidbits: while other string instruments like guitar easily do non-standard tuning, the tuning of a cello is so related to its sound, and the tension carefully calibrated assuming the strings will be tuned normally - that very rarely is a cello ever tuned differently.
In classical music, doing so is called scordatura, and typically is used where only the lower two strings are tuned down a half step (thus making the strings play a b minor 7 chord).
Baroque musicians often tune to a lower A, for example A=417, which sounds almost as low as an Ab, and gives a darker, more muted sound.
The A=440 standard is actually relatively recent, and had to be introduced with greater travel capabilities in the 19th century because orchestras around Europe would tune wildly differently.
Tuning has gotten even more complicated since the standardization of equal temperament, first with the piano, and now with Autotune in popular recordings.
The reason for this not having been standard before is it actually makes things “out of tune” by the standard addressed in this video of perfect resonance.
As such, if playing pop, you actually have to tune your fifths a little close together, so that they are “equally out of tune” (this is what equal temperament really means).
All this is meant to convey is: tuning is incredibly complicated - it depends on the context of the music and other instruments present. It may be hard - but don’t forget - theoretically intonation is even more complicated than in practice, so don’t give up. Keep at it and it will all work out.
If you have any more questions on how to tune your cello, leave them below. For more of Justin’s playing, go to Justin Lepard Cello.
Helpful links:
Names of each string: (from thinnest to thickest) A string - D string - G string- C string
Tuning reference: http://www.get-tuned.com/online_cello_tuner.php
Online piano: https://virtualpiano.net/
Justin’s channel: https://www.youtube.com/user/justinlepard
#consordini #cello #cellolesson
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ How to Tune a Cello [Cello Lesson 3]](https://i.ytimg.com/vi/MI3bQQ4yzzY/mqdefault.jpg)





![Tritik TkDelay Review [Extended Version]
In this video, we will take a look at a great and versatile delay plugin fro Tritik - the Tritik tkDelay.
TkDelay definitely has some modularity to it. Well go over the presets it has, but just playing around with it, you get a great amount of control of what you can do manually.
Delay VST are far and between when it comes to what you can do, especially with the ones that boast a simplistic design. Starting with the inputs, you get control over the Left and Right channel with simple volume knobs.
These go straight into the Delay tab, where the delay effect itself is not only sync capable, you can control them individually, just like the right and left volume channels.
From here on, that is where the delay plugin from Tritik gets interesting, the follow-up knobs control the Modulation, more precisely, the depth and rate of the delay which is still input based on the left and the right channel.
And the last input dependable tab is Feedback, which is once again, input-based, as this is the workflow of the plugin.
And the last thing in the first line of the settings, you end up at the output tab, where you can select the dryness/wetness of the delay and the output gain, which you can set from plus to minus 12 tkDelay does not stop there though.
The bottom row includes more parameters you can choose.
The following settings also include the Left/Right channel cross parameter, from direct to 50/50 and Ping Pong and every slight segment in-between tk delay continues with a frequency shift parameter that once again, allows you to control it per-channel basis, left and right channel, like the usual.
Then coming back to universal control knobs, you get to adjust the reverse and overdrive of the delay. And finally, the last step in creating your own delay plugin, you get a decent feature of also filtering the delay.
The filter section lets you choose a pass, the frequency range, an LFO with depth and rate, make it free or sync. And this entire Tritik tk delay plugin is for 50 euros, just like very Tritik vst.
And like with every other Tritik plugin, you can try the tritik delay plugin for free both on PC and Mac.
Anything from AU, to VST to AAX. And now onto the presets. The Basic preset creates a very arpeggiator inspired effect, working as a quick delay that creates a large and wide space, one that you would find in a cave or a large abandoned building - just without the reverb.
The Bright Bounces preset follows in the shoes of the stock one, filtering the low frequencies and making the sound more of a complimentary piece. The Echo Mod preset creates a more of an Echo effect, just as the name implies.
The response is quick, so all it does is create a wide response that feels grander and more dynamic. The Fuzz Away preset is an interesting one, it distorts the audio quite heavily, yet still making it distant and eerie.
Following this, the In A Tube preset does a similar thing, just without the distortion. So as you can already see, the plugin offers quite a few presets in almost two variations, you get a preset and a variation of it that creates a completely different effect that still feels familiar to the prior.
And this continues with the preset for quite a bit, but we wont cover them here in the description as there are quite a few, such as Move Around, PingPong, Resonant, Room, Alice, Destroy, Dirty Phone, Downward Fast, Downward, Hygiaphone, Jumping Siren and many many more.
To say the least, the plugin pack quite a few specialised and nicely crafter presets for this decently powerful delay plugin.
Have you enjoyed our Tritik tkDelay review? Are you thinking of getting it for yourself? Or maybe there is a plugin that we should look at that beats this one? Let us know!
If you liked the video, leave a like and subscribe to our channel for more great budget and professional plugins and if you have any thoughts, questions or suggestions, feel free to leave them in the comment section below.
#consordini #tritik #tkdelay #audioplugin
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Tritik TkDelay Review [Extended Version]](https://i.ytimg.com/vi/NwooeFcSbfE/mqdefault.jpg)
![TAL-Dub-X [Review + Tutorial]
In this video, well take a look at Dub-X from TAL, a great piece of audio delay software.
Just like every other amazing plugin from TAL, Dub-X brings the wonderful sound of analogue, to the digital space. The TAL Dub delay is beautiful and rather customizable.
Like most other delay VST out in the market, you get the basic cookie cutter settings, but TAL goes a step further, the feedback nobs are greatly sensitive to the point youre able to start generating sounds and progressions as if its a generator, rather than an effect, making this a great piece of software for sound design, psychedelic music or even just to play around, its great.
The presets allow you to achieve a nice chorus effect, distortion, harmonic sounds and much more, making it a wonderful tool for just around $20. Did we mention its that cheap? Because it is!
TAL is wonderful with their pricing, having most of their plugin library completely free and anything you can buy is amazingly cheap in comparison and the Dub X is no different. What else is there to say? And you know whats even better than cheap software? Free software.
Dub-X is a remake of the original freeware plug-in the TAL Dub, which is still available on the TAL website and you can get it right now, BUT, if you choose to invest the $20 - you get plenty of additional features and AAX and OSX 64 support and not like with some of the classic software-based plugins known to be made by TAL, this one is completely unique and you find this sound anywhere else and the aforementioned possibility to basically loop the delay forever is a design desition and not a byproduct of the code behind the plugin.
This means the TAL Dub-X is catered for you to generate infinite loops of delay, with the special saturations stage and their high-quality low pass filter with resonance settings. Some of the other features include a ping pong mode, delay times up to two seconds, a high and a low pass filter, host tempo sync and many more (like Stereo triangle LFO modulation for delay time and resonance filter).
So if this doesnt sound like a bargain for the price I dont know what will. But, if you want to try it out before committing to a license, you can download a demo, which includes a rising white noise that recures every minute but shouldnt be too invasive for you to get a feel for the plugin.
And what does the free plugin have to offer? Well, to start with, there are three different versions you can download! The TAL Dub, TAL Dub-2 and TAL Dub-3.
The first one is a vintage style delay effect that can generate anything from really clean, to really distorted. Its sequel, the Dub-2 introduces a nicer GUI and a brand new sound engine, which introduces plenty of additional features not found in the first one, like a sinus LFO and a 4x oversampled distortion stage.
And with the Dub-3 we see a complete rework for the GUI once again and additional features that include non-linear 6dB low pass filter, 3dB high pass filter. All of these are wonderful choices with their unique sound, so you have plenty to choose from and play around even before buying the TAL Dub-X, which is only $20, so feel free to get the whole collection.
Do you know any other wonderful delay plugins? Have the infinite loop of delay caught your attention? Let us know! If you enjoyed the video, be sure to leave a like and subscribe to our channel.
If you have any thoughts or questions, dont be afraid of commenting in the comment section below. And if youre curious about more products from TAL, we have an extensive list our channel available right now!
You can get it here - https://www.pluginboutique.com/product/2-Effects/10-Delay/436-TAL-Dub-3/?a_aid=5e0ed9ae72504
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/
#consordini #tal #audioplugin TAL-Dub-X [Review + Tutorial]](https://i.ytimg.com/vi/O_Uy6iiS4So/mqdefault.jpg)
