Uploaded April 2019 | Updated November 2026, 3 hours ago
This review looks at the Golden Age Project Comp-3A. The Golden Age Comp 3-A has been hailed as one of the best compressors for R&B vocals and one of the best compressors for rap vocals.
If you’re interested in purchasing Golden Age Project COMP-3A, you can do so here with a great price: imp.i114863.net/DoOy2
When you are in the music studio it is always important that you have the right reliable equipment on hand to get the best results.
The right professional audio equipment can make a huge difference in your results. The goal of this review is to see if the Golden Age can deliver the professional sound it promises.
We review sound engineering processes using the Golden Age Project in music production to get a feel for this music technology and see if it does perform as promised.
Everything Old is New Again
The age of the clone is in full swing. Today’s equipment seems to be going for the old school sound that is favored in certain genres.
Every month new clones are revealed. The GAP is a fine example of a clone that delivers old school processes at a fraction of the cost of the original equipment.
Comp-3A is their latest rendition.
It is a “clone” of the Audio/UREI Teltronix LA-3A. The processor which inspired the Comp 3A was a hybrid which balanced optic controls with solid state circuitry. The 3A has incorporated all the wanted features of the LA-3A while delivering the tweaks that actually improve function!
What You Need To Know
The 3A uses a 24V AC power supply. You can use either the included power supply line PSU or you can plug into the Golden Age half-rack which is sold separately. On the rear is where you find all the jacks.
Input, output, XLR and TRS jack as well.
The front of the 3A is hauntingly familiar and looks a lot like the LA-3A. plenty of controls, yet it feels very uncluttered and has an intuitive layout.
The peak reduction and gain controls are joined by a side chain filter, which can leave the gain less responsive at low frequency levels when you turn the controls clockwise. The Stereo link is conveniently located on the front panel which makes it easier to connect two units.
Using a small flat head screw driver or a similarly small flat tool into the mono trim pot will let you adjust the pot to suit your specific needs.
Making this adjustment will let you get the full stereo compression and help you to avoid problems with flickering.
Be sure to set your controls to similar behavior. You can do this by setting things up by ear instead of by sight.
Just like on the original you have two ratios to work with. You can set it at 4:1 or 10:1. 10:1 is the upper limit, 4:1 is the lower.
Hooking It Up and Using it
You can easily install the Comp 3A as an external effect on your DAW. Setup takes minutes.
We used it on several selections and found that it really did perform well for an optical compressor.
It was fast, it was accurate and was easy to use. We were not too happy with the absence of the attack and release control but we were able to work around it.
Overall
For the money this compressor delivers exactly what you need in the audio studio. While it may not be the best pick across all genres it definitely held its own when it came to hip-hop, rap and R&B vocals.
We loved the fact that it was a quick and easy compressor to reuse. You are able to use your favorite presets for the majority of your mixing and mastering and do it with confidence unlike other compressors this really is a one and done experience.
The price is right, the results are great and ultimately the recommendation is that you should be making room for this equipment in your studio is well-worth the small investment.
Watch the video to learn more about this compressor. Leave your comments or questions in the comments section!
#consordini #goldenageproject
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini
This review looks at the Golden Age Project Comp-3A. The Golden Age Comp 3-A has been hailed as one of the best compressors for R&B vocals and one of the best compressors for rap vocals.
If you’re interested in purchasing Golden Age Project COMP-3A, you can do so here with a great price: imp.i114863.net/DoOy2
When you are in the music studio it is always important that you have the right reliable equipment on hand to get the best results.
The right professional audio equipment can make a huge difference in your results. The goal of this review is to see if the Golden Age can deliver the professional sound it promises.
We review sound engineering processes using the Golden Age Project in music production to get a feel for this music technology and see if it does perform as promised.
Everything Old is New Again
The age of the clone is in full swing. Today’s equipment seems to be going for the old school sound that is favored in certain genres.
Every month new clones are revealed. The GAP is a fine example of a clone that delivers old school processes at a fraction of the cost of the original equipment.
Comp-3A is their latest rendition.
It is a “clone” of the Audio/UREI Teltronix LA-3A. The processor which inspired the Comp 3A was a hybrid which balanced optic controls with solid state circuitry. The 3A has incorporated all the wanted features of the LA-3A while delivering the tweaks that actually improve function!
What You Need To Know
The 3A uses a 24V AC power supply. You can use either the included power supply line PSU or you can plug into the Golden Age half-rack which is sold separately. On the rear is where you find all the jacks.
Input, output, XLR and TRS jack as well.
The front of the 3A is hauntingly familiar and looks a lot like the LA-3A. plenty of controls, yet it feels very uncluttered and has an intuitive layout.
The peak reduction and gain controls are joined by a side chain filter, which can leave the gain less responsive at low frequency levels when you turn the controls clockwise. The Stereo link is conveniently located on the front panel which makes it easier to connect two units.
Using a small flat head screw driver or a similarly small flat tool into the mono trim pot will let you adjust the pot to suit your specific needs.
Making this adjustment will let you get the full stereo compression and help you to avoid problems with flickering.
Be sure to set your controls to similar behavior. You can do this by setting things up by ear instead of by sight.
Just like on the original you have two ratios to work with. You can set it at 4:1 or 10:1. 10:1 is the upper limit, 4:1 is the lower.
Hooking It Up and Using it
You can easily install the Comp 3A as an external effect on your DAW. Setup takes minutes.
We used it on several selections and found that it really did perform well for an optical compressor.
It was fast, it was accurate and was easy to use. We were not too happy with the absence of the attack and release control but we were able to work around it.
Overall
For the money this compressor delivers exactly what you need in the audio studio. While it may not be the best pick across all genres it definitely held its own when it came to hip-hop, rap and R&B vocals.
We loved the fact that it was a quick and easy compressor to reuse. You are able to use your favorite presets for the majority of your mixing and mastering and do it with confidence unlike other compressors this really is a one and done experience.
The price is right, the results are great and ultimately the recommendation is that you should be making room for this equipment in your studio is well-worth the small investment.
Watch the video to learn more about this compressor. Leave your comments or questions in the comments section!
#consordini #goldenageproject
Our website - consordini.com
Facebook - facebook.com/Consordini
Instagram - instagram.com/consordini




![Tritik TkDelay Review [Extended Version]
In this video, we will take a look at a great and versatile delay plugin fro Tritik - the Tritik tkDelay.
TkDelay definitely has some modularity to it. Well go over the presets it has, but just playing around with it, you get a great amount of control of what you can do manually.
Delay VST are far and between when it comes to what you can do, especially with the ones that boast a simplistic design. Starting with the inputs, you get control over the Left and Right channel with simple volume knobs.
These go straight into the Delay tab, where the delay effect itself is not only sync capable, you can control them individually, just like the right and left volume channels.
From here on, that is where the delay plugin from Tritik gets interesting, the follow-up knobs control the Modulation, more precisely, the depth and rate of the delay which is still input based on the left and the right channel.
And the last input dependable tab is Feedback, which is once again, input-based, as this is the workflow of the plugin.
And the last thing in the first line of the settings, you end up at the output tab, where you can select the dryness/wetness of the delay and the output gain, which you can set from plus to minus 12 tkDelay does not stop there though.
The bottom row includes more parameters you can choose.
The following settings also include the Left/Right channel cross parameter, from direct to 50/50 and Ping Pong and every slight segment in-between tk delay continues with a frequency shift parameter that once again, allows you to control it per-channel basis, left and right channel, like the usual.
Then coming back to universal control knobs, you get to adjust the reverse and overdrive of the delay. And finally, the last step in creating your own delay plugin, you get a decent feature of also filtering the delay.
The filter section lets you choose a pass, the frequency range, an LFO with depth and rate, make it free or sync. And this entire Tritik tk delay plugin is for 50 euros, just like very Tritik vst.
And like with every other Tritik plugin, you can try the tritik delay plugin for free both on PC and Mac.
Anything from AU, to VST to AAX. And now onto the presets. The Basic preset creates a very arpeggiator inspired effect, working as a quick delay that creates a large and wide space, one that you would find in a cave or a large abandoned building - just without the reverb.
The Bright Bounces preset follows in the shoes of the stock one, filtering the low frequencies and making the sound more of a complimentary piece. The Echo Mod preset creates a more of an Echo effect, just as the name implies.
The response is quick, so all it does is create a wide response that feels grander and more dynamic. The Fuzz Away preset is an interesting one, it distorts the audio quite heavily, yet still making it distant and eerie.
Following this, the In A Tube preset does a similar thing, just without the distortion. So as you can already see, the plugin offers quite a few presets in almost two variations, you get a preset and a variation of it that creates a completely different effect that still feels familiar to the prior.
And this continues with the preset for quite a bit, but we wont cover them here in the description as there are quite a few, such as Move Around, PingPong, Resonant, Room, Alice, Destroy, Dirty Phone, Downward Fast, Downward, Hygiaphone, Jumping Siren and many many more.
To say the least, the plugin pack quite a few specialised and nicely crafter presets for this decently powerful delay plugin.
Have you enjoyed our Tritik tkDelay review? Are you thinking of getting it for yourself? Or maybe there is a plugin that we should look at that beats this one? Let us know!
If you liked the video, leave a like and subscribe to our channel for more great budget and professional plugins and if you have any thoughts, questions or suggestions, feel free to leave them in the comment section below.
#consordini #tritik #tkdelay #audioplugin
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/ Tritik TkDelay Review [Extended Version]](https://i.ytimg.com/vi/NwooeFcSbfE/mqdefault.jpg)
![TAL-Dub-X [Review + Tutorial]
In this video, well take a look at Dub-X from TAL, a great piece of audio delay software.
Just like every other amazing plugin from TAL, Dub-X brings the wonderful sound of analogue, to the digital space. The TAL Dub delay is beautiful and rather customizable.
Like most other delay VST out in the market, you get the basic cookie cutter settings, but TAL goes a step further, the feedback nobs are greatly sensitive to the point youre able to start generating sounds and progressions as if its a generator, rather than an effect, making this a great piece of software for sound design, psychedelic music or even just to play around, its great.
The presets allow you to achieve a nice chorus effect, distortion, harmonic sounds and much more, making it a wonderful tool for just around $20. Did we mention its that cheap? Because it is!
TAL is wonderful with their pricing, having most of their plugin library completely free and anything you can buy is amazingly cheap in comparison and the Dub X is no different. What else is there to say? And you know whats even better than cheap software? Free software.
Dub-X is a remake of the original freeware plug-in the TAL Dub, which is still available on the TAL website and you can get it right now, BUT, if you choose to invest the $20 - you get plenty of additional features and AAX and OSX 64 support and not like with some of the classic software-based plugins known to be made by TAL, this one is completely unique and you find this sound anywhere else and the aforementioned possibility to basically loop the delay forever is a design desition and not a byproduct of the code behind the plugin.
This means the TAL Dub-X is catered for you to generate infinite loops of delay, with the special saturations stage and their high-quality low pass filter with resonance settings. Some of the other features include a ping pong mode, delay times up to two seconds, a high and a low pass filter, host tempo sync and many more (like Stereo triangle LFO modulation for delay time and resonance filter).
So if this doesnt sound like a bargain for the price I dont know what will. But, if you want to try it out before committing to a license, you can download a demo, which includes a rising white noise that recures every minute but shouldnt be too invasive for you to get a feel for the plugin.
And what does the free plugin have to offer? Well, to start with, there are three different versions you can download! The TAL Dub, TAL Dub-2 and TAL Dub-3.
The first one is a vintage style delay effect that can generate anything from really clean, to really distorted. Its sequel, the Dub-2 introduces a nicer GUI and a brand new sound engine, which introduces plenty of additional features not found in the first one, like a sinus LFO and a 4x oversampled distortion stage.
And with the Dub-3 we see a complete rework for the GUI once again and additional features that include non-linear 6dB low pass filter, 3dB high pass filter. All of these are wonderful choices with their unique sound, so you have plenty to choose from and play around even before buying the TAL Dub-X, which is only $20, so feel free to get the whole collection.
Do you know any other wonderful delay plugins? Have the infinite loop of delay caught your attention? Let us know! If you enjoyed the video, be sure to leave a like and subscribe to our channel.
If you have any thoughts or questions, dont be afraid of commenting in the comment section below. And if youre curious about more products from TAL, we have an extensive list our channel available right now!
You can get it here - https://www.pluginboutique.com/product/2-Effects/10-Delay/436-TAL-Dub-3/?a_aid=5e0ed9ae72504
Our website - https://consordini.com
Facebook - https://www.facebook.com/Consordini/
Instagram - https://www.instagram.com/consordini/
#consordini #tal #audioplugin TAL-Dub-X [Review + Tutorial]](https://i.ytimg.com/vi/O_Uy6iiS4So/mqdefault.jpg)




