Uploaded April 2019 | Updated November 2026, 1 hour ago
The time has come for this chainsaw restoration. This specific saw restoration is for me and I have been wanting to get to this tool for a long time. I started the disassembly in November 2018 and had to wait a while for some rare parts to arrive. This chainsaw is a McCulloch 99 two-man chainsaw made in 1954. The engine is 161cc and the powerhead alone is 51lbs making it one of the largest production chainsaws ever and the largest in McCulloch's production line at the time.
In this video, I focus on disassembling the powerhead and getting everything ready for painting. I used 2 coats of self-etching primer, 3 coats of yellow enamel, and 3 coats of 2K fuel-resistant clear paint for each of the painted pieces.
I was not able to get the clutch off of this saw, so instead of fixing something until I break it, I decided to leave it alone and restore the chainsaw without removing the clutch. This meant that the crankshaft had to stay together as well. Almost all pieces were meticulously cleaned by hand as solvents and degreasers can only do so much.
In the next video, I will piece the whole saw together and hopefully and finally cut some wood.
Wrenches are now for sale at handtoolrescue.com
Help secure more tools for future videos (if you want):
patreon.com/handtoolrescue
Instagram:
instagram.com/handtoolrescue
Facebook Group - Share your restorations
facebook.com/groups/handtoolrescue
Reddit - Share your restorations
reddit.com/r/HandToolRescue
The time has come for this chainsaw restoration. This specific saw restoration is for me and I have been wanting to get to this tool for a long time. I started the disassembly in November 2018 and had to wait a while for some rare parts to arrive. This chainsaw is a McCulloch 99 two-man chainsaw made in 1954. The engine is 161cc and the powerhead alone is 51lbs making it one of the largest production chainsaws ever and the largest in McCulloch's production line at the time.
In this video, I focus on disassembling the powerhead and getting everything ready for painting. I used 2 coats of self-etching primer, 3 coats of yellow enamel, and 3 coats of 2K fuel-resistant clear paint for each of the painted pieces.
I was not able to get the clutch off of this saw, so instead of fixing something until I break it, I decided to leave it alone and restore the chainsaw without removing the clutch. This meant that the crankshaft had to stay together as well. Almost all pieces were meticulously cleaned by hand as solvents and degreasers can only do so much.
In the next video, I will piece the whole saw together and hopefully and finally cut some wood.
Wrenches are now for sale at handtoolrescue.com
Help secure more tools for future videos (if you want):
patreon.com/handtoolrescue
Instagram:
instagram.com/handtoolrescue
Facebook Group - Share your restorations
facebook.com/groups/handtoolrescue
Reddit - Share your restorations
reddit.com/r/HandToolRescue
![1940s Spark Plug Cleaner [Restoration]
This spark plug cleaner restoration took much longer that I thought it would.
This tool is a 1944-45 Auto-lite or Autolite Spark Plug Cleaning Service machine. I bought this locally in Saskatoon, SK, Canada and thought it would be fun to restore. The tool is essentially a localized sandblaster for the tips of spark plugs.
I went with several coats of filler primer in hopes of covering all the pitting and denting, but I feel like bondo may have been a better choice. I was not able to get the pressure gauge open to have a look and see if anything was damaged or broken. In the end, the machine worked great, but the gauge did not show that enough pressure for optimal functioning was there. I do not know if this was a gauge issue or a leak somewhere else.
I have not been able to find any documentation or manuals for this tool so operating it was just based on how I think it should work.
I can see myself actually using this when I come across more gas-powered tools.
If you ever come across the different sizes of spark plug holders for this, please email me at handtoolrescue@gmail.com
All graphics were provided by FORMA Graphics. You can contact them at formagraphicart@gmail.com. He has a passion for old tools and will help you make the decal/sticker that you need.
Id like to thank Evapo-Rust for sponsoring this video.
Music: http://www.bensound.com/royalty-free-music
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/ 1940s Spark Plug Cleaner [Restoration]](https://i.ytimg.com/vi/U70BWviOXEQ/mqdefault.jpg)

![1930s Rotary Jigsaw (Cutawl) [Restoration]
This rotary jigsaw was also known as the Cutawl (Model K8). Based on the age of the motor and the history of patents on this machine, I believe it was made sometime in the 1930s. It had many other cutters available for cutting materials such as metal, wood, leather, fabric, drywall, and essentially anything else that is up to 1.25 thick and softer than hardened steel.
This restoration was a lengthly process as the motor needed work as well. I am stunned this motor eventually ran so well. There is zero play in any direction other than back and forth when I move the armature. For a motor that is ~85 years old, I was very surprised to see the bronze bushings having essentially no wear. Its possible they were replaced at one point.
After doing research on this tool and talking with some collectors and experts, I learned that there were certain parts that were fragile and prone to damage. The large wheel in the back is attached to the main shaft by a pin that does not go through the centre of the shaft, but is offset. This means that over time, the offset pin allowed the wheel to wear around the shaft and starting wobbling itself to the point of bending/breaking the shaft. I chose not to risk it and left the wheel as is.
While looking at a parts diagram of this tool, I decided it was too risky to try and hammer and pry off the rotary mechanism as its filled with small steel balls and retainer rings. These two things are my enemies. All I do is loose them. The part works completely fine, so there is no reason to mess with it.
I could actually see myself using this tool for some applications. It has a very natural feel to controlling the direction of cut and I feel like I could be more accurate with this than a modern jigsaw.
Hopefully you get a chance to try one of these out one day!
Here is a link to all the materials the tool can cut: http://imgur.com/a/RDysJ
Thank you to Evapo-rust for sponsoring this video!
Help secure more tools for future videos (if you want): https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue/ 1930s Rotary Jigsaw (Cutawl) [Restoration]](https://i.ytimg.com/vi/Ug2IbkusiUk/mqdefault.jpg)

![Antique Centrifugal Dental Casting Machine [Restoration]
This restoration is on a 1930s dental casting machine made by the Torit Manufacturing Co. of St. Paul, Minnesota, USA. I was unable to find a photo of this model with the exact same base design, but similar designs exist. This machine would most likely be used for casting gold teeth and fillings.
The base was extremely rusty, but all other parts are made of aluminum or brass, so they held together much better over the years. I decided to use babbitt as a casting metal since it melts at such a low temperature and isnt very expensive. This was my first time casting any metal on my own and learning the process was a lot of fun.
Its nice to see this tool back in service and spinning molten metal very close to your face at high speed.
Wrenches, screwdrivers, and socket drivers are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/
Podcast (with @jimmydiresta and Andrew Alexander) - https://anchor.fm/fitzall Antique Centrifugal Dental Casting Machine [Restoration]](https://i.ytimg.com/vi/VbdYQs3yfXM/mqdefault.jpg)
![1870s Ornate Inclinometer [Restoration]
This restoration is on an 1870s Davis Level & Tool Co. level/inclinometer. I found this tool years ago, but was intimidated by the amount of work required to restore it, its value, and its age.
The level was clearly dropped at some point as almost all edges had some form of damage. The far edges were missing large chunks of cast iron, there was a large crack on one side of the level, and the ornate floral casting portions had multiple cranks within it. Surprisingly, the glass vial was completely intact. The entire level was also coating with silver paint, for some reason.
Due to its age and value, I felt like repairing the broken casting with bronze would be a complete eye sore and not appropriate for beautiful of a tool. So I decide to torch weld the cracks used 100% cast iron filler rod. This is an incredibly difficult task, but the only way to ensure the repairs are not visually noticeable.
I also decided to use japanning to keep the restoration as authentic as possible. I experimented with spraying japanning out of a pressurized can, which actually worked decently, but definitely needs to be perfected.
Furthermore, I decided to use my 1870s metal planer to flatten the welded repairs to replicate the original marks made by a metal planer during its original production.
This restoration took me longer to complete than some of my more complicated tool restorations, but I am really happy with how it turned out.
Wrenches are now for sale at www.handtoolrescue.com
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/
Podcast (with Jimmy DiResta and Andrew Alexander) - https://anchor.fm/fitzall 1870s Ornate Inclinometer [Restoration]](https://i.ytimg.com/vi/VqauzGj_aBY/mqdefault.jpg)

![Jesus Hand Plane [Restoration]
I accidentally came across Jesus personal hand plane while cleaning my shop. I do not know how it ended up in the middle of Canada, but carbon-dating determined this plane is around 2000 years old. The restoration focuses on resurrecting all broken and missing parts of the plane so it can function once again. Jesus Hand Plane [Restoration]](https://i.ytimg.com/vi/WBahcvJOOpc/mqdefault.jpg)

![Rare Bow Chainsaw [Restoration]
This restoration is on the first gasoline-powered one-man bow chainsaw ever produced. It was made by Precision Part Ltd. of Montreal, Canada in the 1940s.
It took me 5 years to find 3 separate dilapidated chainsaw motors, 2 bow bars, 1 straight bar, and 2 chains just to source all the parts to restore one function chainsaw. Unfortunately, the most complete motor happened to also be completely seized, but that is just the way it goes sometimes. Adding further to the complications, the body of the chainsaw is rumoured to be made of out of a magnesium alloy that is so high in nickel and iron that it cannot be welded, so any major repairs that require welding, cannot be made. Furthermore, the massive chain that is used on this type of chainsaw is not made anymore and all available options potentially used to the point of being unsafe.
This saw is so rare that I actually stopped trying to take it apart when I got deep inside the crankcase. I became worried that the risk of trying to hammer out shafts and bearings would put too much stress on an unweldable casting that it would crack, and then I would crack and throw myself in the garbage, never to be restored.
The bow itself is quite unique, with its patented self-tensioning mechanism, which can be seen here: https://patentimages.storage.googleapis.com/71/cd/8d/09fe8fc70b33d0/US2487322A.pdf
The restoration process took so long that you can see how long my facial hair grew by the end of the video.
In the end, this insane chainsaw design is just too much fun to use and I am definitely keeping this one for myself.
Id like to thank CRC for sponsoring this video. Ive switched to a food-grade penetrating oil from them as a more safe alternative, and it as worked just as well as the usual penetrating oils Ive used.
You can check out the products from them used in this video in the links below:
www.evapo-rust.com
www.crcindustries.com/evapo-rust/
www.crcindustries.com/smartwasher/
www.crcindustries.com/food-grade-penetrating-oil-11-wt-oz/
Help secure more tools for future videos (if you want):
https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue
Facebook Group - Share your restorations
https://www.facebook.com/groups/handtoolrescue
https://www.facebook.com/handtoolrescue/
Reddit - Share your restorations
https://www.reddit.com/r/HandToolRescue/
Podcast (with @jimmydiresta and Andrew Alexander) - https://anchor.fm/fitzall Rare Bow Chainsaw [Restoration]](https://i.ytimg.com/vi/Wjv75kJyZ7M/mqdefault.jpg)
![Antique Flamethrower [Restoration]
This Little Giant flamethrower/flame gun was made by the Hauck MFG. Co from the 1930s-1950s. The tool restoration was pretty straight forward, but the operation was not.
I used high-heat oil-and-gas resistant paint wherever possible. The red handle is not the original colour, I just thought it looked nice. It was nice to see that the pump still had compression and the pressure gauge still worked.
Operating this thing is not safe...at all. The shutoff valve is so far from the spout that there is a lot of kerosene left in the piping that needs to burn off before it shuts off. The flamethrower was still burning ~5min after I turned it off. I tested that valve and it works just fine, so the burning is just part of its function. I couldnt use it for very long as there is a fire ban in my area and kerosene is much harder to put out than gasoline.
This was a fun local find here in Saskatoon. I will probably put this one up for sale.
Help secure more tools for future videos (if you want): https://www.patreon.com/handtoolrescue
Instagram:
https://www.instagram.com/handtoolrescue/ Antique Flamethrower [Restoration]](https://i.ytimg.com/vi/WtGeadX_Jt4/mqdefault.jpg)