Uploaded May 2014 | Updated September 2026, 44 minutes ago
If you have a USB Flash Drive that is missing its full capacity that you know used to be there but suddenly has gone away, chances are your suffering from having a bad partition size.
This problem masks itself in windows making windows think the drive is at full capacity so you can not format it to get back the space.
But fear not there is still an easy, free way to fix this from inside Windows without downloading or using any 3rd party tools or applications.
We will be doing this with Diskpart and I will take you step by step through the entire process so that you can follow along and fix your problem.
Note this same guide works for all removable media like SD Cards, MicroSD Cards, Compact Flash, Etc.
If you have a USB Flash Drive that is missing its full capacity that you know used to be there but suddenly has gone away, chances are your suffering from having a bad partition size.
This problem masks itself in windows making windows think the drive is at full capacity so you can not format it to get back the space.
But fear not there is still an easy, free way to fix this from inside Windows without downloading or using any 3rd party tools or applications.
We will be doing this with Diskpart and I will take you step by step through the entire process so that you can follow along and fix your problem.
Note this same guide works for all removable media like SD Cards, MicroSD Cards, Compact Flash, Etc.










![HPE Aruba S2500 Initial Switch Configuration – Cheap 10gb Networking At Home!
Next Video in this Series: https://youtu.be/68jY7gym5BI
This is meant to be an all-inclusive tutorial on all the steps needed for the initial configuration of an HPE Aruba S2500 Switch so that if you buy one you can have a guide to help you along with setup.
This guide will work for any of the S2500 and the S3500 models S2500-48T S2500-48P S2500-24T and S2500-24P.
We will cover.
- Factory Reset
- Initial Quick Configuration using the Quick Setup GUI
- Reaching the Web Interface
- Setting up our Administrator Password
- Setting our Enable Password
- Setting Our Switch Management IP
- Downloading and Updating the Firmware / ArubaOS
- Using SSH
- Disable the Default Stacking Ports to Enable 4x SFP+ Ports for Switched Networking
I will cover the “gotchas” as we go for things to look out for, and as this video is integrated into part of my “Upgrading My Network to 10gb on the Cheap” series.
I go over a bit of the influential reasons why the S2500 was the switch I purchased over the other more common choices like the Microtik Cloud Switches. [Mikrotik CSS326-24G-2S] [Mikrotik CRS305-1G-4S+IN] [CRS226-24G-2S+IN] [CRS226-24G-2S+RM]
Fans are very quiet for enterprise switches, but I am doing a fan mod and replacing the fans with Noctua NF-A4x20 FLX Fans.
You can find them with the best prices here on Amazon:
Noctua NF-A4x20 FLX - https://amzn.to/2DamN7e
Also buying this to clean up my rack.
Cable Management! - https://amzn.to/2TSw4X4
Update Your Firmware:
Aruba Site: http://support.arubanetworks.com/LifetimeWarrantySoftware/tabid/121/DMXModule/661/EntryId/22078/Default.aspx
HPE Networking Site: http://hpe.com/networking/mynetworking/
I Purchased My Switches From Ebay
S2500-48T from rakicomputers: https://www.ebay.com/usr/rakicomputers?_trksid=p2060353.m1438.l2754
2500-24P from ocean-tech: https://www.ebay.com/usr/ocean-tech?_trksid=p2060353.m1438.l2754 HPE Aruba S2500 Initial Switch Configuration – Cheap 10gb Networking At Home!](https://i.ytimg.com/vi/HegeBkglsec/mqdefault.jpg)