Uploaded September 2025 | Updated September 2026, 2 weeks ago
Mandic Labs 2.0 is supported by:
🛠️ PCBWay – pcbway.com/g/k66yI7
🔥 Prusa3D – prusa3d.com/#a_aid=MandicReally
------------------------------------------------------------------------------------------------------------
Time to add some futuristic flair to Mandic Labs 2.0 with some custom designed and installed LED strip lights! Watch as I use 3D printing to create unique lighting design elements and completely transform my studio setup. These LED lights really bring the space to life!
------------------------------------------------------------------------------------------------------------
Check out more MandicReally projects, merch, and ways to support the channel:
🌐 mandicreally.com/links
🙏 Special thanks to @multiboard_io for supporting the studio as well! : https://than.gs/u/234635?affiliateCode=mandicreally
------------------------------------------------------------------------------------------------------------
🛒 Featured Products & Recommendations (Affiliate Links):
*** YAWL PCB Project: pcbway.com/project/shareproject/Yet_Another_WLED_Controller_4460ed59.html
*** Prusa Core One 3D Printer: prusa3d.com/product/prusa-core-one-kit/#a_aid=MandicReally&a_cid=11111111
*** 24V Addressable RGB LEDs: amzn.to/4m0llGK
*** 5V Power Converter: amzn.to/4g36x8I
*** Fuse Block: amzn.to/3JISUQ6
*** Prusament PETG: prusa3d.com/category/prusament-petg#a_aid=MandicReally&a_cid=11111111
*** Prusament PETG V0: prusa3d.com/product/prusament-petg-v0#a_aid=MandicReally&a_cid=11111111
*** Foil Tape: amzn.to/4mKKDcP
*** VHB Tape: amzn.to/4mLx39h
------------------------------------------------------------------------------------------------------------
🎥 My Filming Gear (Affiliate Links):
Main Camera – bhpho.to/3RStTnz
Main Lens – bhpho.to/4avDFmt
Video Recorder – bhpho.to/3Oa4qmZ
Action Cam – bhpho.to/45CS10Q
Wide Lens – bhpho.to/3RXQXBj
Motorized Slider – bhpho.to/48YMmnD
Studio Mic – bhpho.to/4216F1z
Voiceover Mic – bhpho.to/46uECsE
Monopod – bhpho.to/3PT2yir
Tripod – bhpho.to/3PSKXY4
Primary Lighting – bhpho.to/3RXSmb3
Accent Lighting – bhpho.to/3RXVfsf
RGB Lights – bhpho.to/3S77IbO
Drone – bhpho.to/423XrS6
------------------------------------------------------------------------------------------------------------
🧪 These are my real-world opinions based on hands-on use.
Some links are affiliate links, which means I may earn a small commission—at no extra cost to you.
Not a paid endorsement unless explicitly stated in the video.
------------------------------------------------------------------------------------------------------------
⏱️ TIMESTAMPS:
00:00 - Intro
01:29 - 3D Design Details
03:26 - Failed Design Idea
06:00 - 3D Printing Parts
06:58 - Install Prep
09:30 - Conduit Install
11:29 - Powering The System
12:05 - YAWL WLED Controller Explained
14:21 - Controller Wiring Setup
16:01 - LED Install
16:55 - LED Wiring
17:36 - Test Firing
18:00 - Remaining LED Install & Wiring
19:07 - Test & Diffuser Fail
21:50 - Final Setup
22:49 - Smooth RGB Animation
24:11 - Final Thoughts
25:11 - Outro
#mandicreally
Time to add some futuristic flair to Mandic Labs 2.0 with some custom designed and installed LED strip lights! Watch as I use 3D printing to create unique lighting design elements and completely transform my studio setup. These LED lights really bring the space to life!
Mandic Labs 2.0 is supported by:
🛠️ PCBWay – pcbway.com/g/k66yI7
🔥 Prusa3D – prusa3d.com/#a_aid=MandicReally
------------------------------------------------------------------------------------------------------------
Time to add some futuristic flair to Mandic Labs 2.0 with some custom designed and installed LED strip lights! Watch as I use 3D printing to create unique lighting design elements and completely transform my studio setup. These LED lights really bring the space to life!
------------------------------------------------------------------------------------------------------------
Check out more MandicReally projects, merch, and ways to support the channel:
🌐 mandicreally.com/links
🙏 Special thanks to @multiboard_io for supporting the studio as well! : https://than.gs/u/234635?affiliateCode=mandicreally
------------------------------------------------------------------------------------------------------------
🛒 Featured Products & Recommendations (Affiliate Links):
*** YAWL PCB Project: pcbway.com/project/shareproject/Yet_Another_WLED_Controller_4460ed59.html
*** Prusa Core One 3D Printer: prusa3d.com/product/prusa-core-one-kit/#a_aid=MandicReally&a_cid=11111111
*** 24V Addressable RGB LEDs: amzn.to/4m0llGK
*** 5V Power Converter: amzn.to/4g36x8I
*** Fuse Block: amzn.to/3JISUQ6
*** Prusament PETG: prusa3d.com/category/prusament-petg#a_aid=MandicReally&a_cid=11111111
*** Prusament PETG V0: prusa3d.com/product/prusament-petg-v0#a_aid=MandicReally&a_cid=11111111
*** Foil Tape: amzn.to/4mKKDcP
*** VHB Tape: amzn.to/4mLx39h
------------------------------------------------------------------------------------------------------------
🎥 My Filming Gear (Affiliate Links):
Main Camera – bhpho.to/3RStTnz
Main Lens – bhpho.to/4avDFmt
Video Recorder – bhpho.to/3Oa4qmZ
Action Cam – bhpho.to/45CS10Q
Wide Lens – bhpho.to/3RXQXBj
Motorized Slider – bhpho.to/48YMmnD
Studio Mic – bhpho.to/4216F1z
Voiceover Mic – bhpho.to/46uECsE
Monopod – bhpho.to/3PT2yir
Tripod – bhpho.to/3PSKXY4
Primary Lighting – bhpho.to/3RXSmb3
Accent Lighting – bhpho.to/3RXVfsf
RGB Lights – bhpho.to/3S77IbO
Drone – bhpho.to/423XrS6
------------------------------------------------------------------------------------------------------------
🧪 These are my real-world opinions based on hands-on use.
Some links are affiliate links, which means I may earn a small commission—at no extra cost to you.
Not a paid endorsement unless explicitly stated in the video.
------------------------------------------------------------------------------------------------------------
⏱️ TIMESTAMPS:
00:00 - Intro
01:29 - 3D Design Details
03:26 - Failed Design Idea
06:00 - 3D Printing Parts
06:58 - Install Prep
09:30 - Conduit Install
11:29 - Powering The System
12:05 - YAWL WLED Controller Explained
14:21 - Controller Wiring Setup
16:01 - LED Install
16:55 - LED Wiring
17:36 - Test Firing
18:00 - Remaining LED Install & Wiring
19:07 - Test & Diffuser Fail
21:50 - Final Setup
22:49 - Smooth RGB Animation
24:11 - Final Thoughts
25:11 - Outro
#mandicreally
Time to add some futuristic flair to Mandic Labs 2.0 with some custom designed and installed LED strip lights! Watch as I use 3D printing to create unique lighting design elements and completely transform my studio setup. These LED lights really bring the space to life!
