Uploaded August 2010 | Updated November 2026, 3 hours ago
Go to our Natural Building Blog where we answer questions.
naturalbuildingblog.com
In a different video, I explained how you can pin the corners of bags so the corners don't stick out. Here's another option. You can just turn the bag inside-out, where it looks like this. Here's a sample bag that shows what this looks like.
Go to our Natural Building Blog where we answer questions.
naturalbuildingblog.com
In a different video, I explained how you can pin the corners of bags so the corners don't stick out. Here's another option. You can just turn the bag inside-out, where it looks like this. Here's a sample bag that shows what this looks like.





![Cutting Wire
Go to our Natural Building Blog where we answer questions.
http://naturalbuildingblog.com
You can sew the bags closed with galvanized wire. We use pieces 9 long. You cut one piece and use it as a measuring device [to measure the others]. Cut the wire at an angle so you have a sharp end for stitching. Note: our wire is 15 gauge, which is about 1/16 (1.8 mm) thick. Cutting Wire](https://i.ytimg.com/vi/sd0nc-8Jtho/mqdefault.jpg)
![Barbed Wire
Go to our Natural Building Blog where we answer questions.
http://naturalbuildingblog.com
We use two strands of 4-point barbed wire between every course [of bags]. We hold it in place with bricks, or in this case CEBs (compressed earth blocks). Barbed Wire](https://i.ytimg.com/vi/sfV1vNIFfIM/mqdefault.jpg)



