Uploaded May 2010 | Updated November 2026, 3 hours ago
Go to our Natural Building Blog where we answer questions.
naturalbuildingblog.com
Our next bag is going here. So you can see were going to overlap the previous joint. That's called a running bond.
Go to our Natural Building Blog where we answer questions.
naturalbuildingblog.com
Our next bag is going here. So you can see were going to overlap the previous joint. That's called a running bond.




![Cutting Wire
Go to our Natural Building Blog where we answer questions.
http://naturalbuildingblog.com
You can sew the bags closed with galvanized wire. We use pieces 9 long. You cut one piece and use it as a measuring device [to measure the others]. Cut the wire at an angle so you have a sharp end for stitching. Note: our wire is 15 gauge, which is about 1/16 (1.8 mm) thick. Cutting Wire](https://i.ytimg.com/vi/sd0nc-8Jtho/mqdefault.jpg)
![Barbed Wire
Go to our Natural Building Blog where we answer questions.
http://naturalbuildingblog.com
We use two strands of 4-point barbed wire between every course [of bags]. We hold it in place with bricks, or in this case CEBs (compressed earth blocks). Barbed Wire](https://i.ytimg.com/vi/sfV1vNIFfIM/mqdefault.jpg)




