Uploaded January 2023 | Updated November 2026, 6 hours ago
In part1, we found that the back end of the TR-7 was actually working. We could adjust the RF and AF Gain Controls, The PBT, Mode and Crystal Calibrator.
This test was to evaluate the digital display board and the Pass Band Tuning board. The TR-7 with a flick of a slide switch can become a 150Hz General Purpose Counter. The Counter relies on a 40 MHz reference oscillator that is a part of the PBT board. So, if you can display frequencies from an external source then you have a good test of the Digital Display and PBT Reference Oscillator.
The test was positive for operation of the Counter and PBT so that narrows down the problem to three boards: the Up Convertor, The VCO and the Frequency Translator. I am suspicioning the VCO.
I do not have the extender boards and haven't had much success locating a ste so I am trying alternate tests to see if I can find the bad board.
In part1, we found that the back end of the TR-7 was actually working. We could adjust the RF and AF Gain Controls, The PBT, Mode and Crystal Calibrator.
This test was to evaluate the digital display board and the Pass Band Tuning board. The TR-7 with a flick of a slide switch can become a 150Hz General Purpose Counter. The Counter relies on a 40 MHz reference oscillator that is a part of the PBT board. So, if you can display frequencies from an external source then you have a good test of the Digital Display and PBT Reference Oscillator.
The test was positive for operation of the Counter and PBT so that narrows down the problem to three boards: the Up Convertor, The VCO and the Frequency Translator. I am suspicioning the VCO.
I do not have the extender boards and haven't had much success locating a ste so I am trying alternate tests to see if I can find the bad board.










