Tormach ZA6 Robot | Jogging | PathPilot Quick Tips @tormachinc

Tormach Inc. | Tormach ZA6 Robot | Jogging | PathPilot Quick Tips @tormachinc | Uploaded April 2021 | Updated October 2024, 4 hours ago.
Joint Jogging is the simplest of the three ways to move the ZA6 Robot. There are six ways to jog each joint of the ZA6 robot and can be done by adjusting the slides on the PathPilot notebook. This can be done incrementally or continuously. The other two ways are covered in other videos on this playlist.

Intro 0:00
Joint Jogging 00:21
Incremental Jogging 1:01
Continuous Jogging 1:07
Three Other Methods to Jog 1:15

ZA Robot Playlist: youtube.com/playlist?list=PLrWhN_9rAUJ7c7usu7E2JeRU6QmnF4gBU

Find out more about the ZA6 Robot here: tormach.com/machines/robots.html

Interested in a Tormach machine? Schedule a call with one of our team members at hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have.

Be sure to subscribe for updates on everything Tormach: goo.gl/sWeCs7

Join the Tormach Forums here: hubs.ly/Q029ggRV0

There are several ways to contact Tormach Technical Support.

If you want technical support, please follow these instructions to open a support ticket: hubs.ly/Q029ghcD0

Tormach Technical Support page: hubs.ly/Q029ghwW0

Tormach Technical Support contact: tormach.atlassian.net/servicedesk/customer/portals

About Us: At Tormach, we're dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us:

Visit our website: hubs.ly/Q029gj8M0

Facebook: facebook.com/tormach
Instagram: instagram.com/tormach
Twitter: twitter.com/tormach
LinkedIn: linkedin.com/company/tormach

Making a Carbon Fiber Mold for a Corvette Intake on an 1100M

Tormach 770M Full Machine Installation & Set-Up

Tormach ZA6 PathPilot Quick Tip | Creating Subprograms

Tormach ECM 1.4 to 1.5 Upgrade Installation

Autodesk and Tormach Team Up for a Trade Show Demo

$Tormach Garage Series, Part 6 | How to Choose Coolant Before cutting your parts, you have to decide on how to remove chips from the surface to prevent the chips from being pulled back into the cutter and recut, which will cause poor surface finish. Tormach offers several options: Flood Coolant or MQL, which stands for minimum quantity lubrication. Flood coolant is the traditional method of removing chips away from the cutting area with a literal flood of coolant. This is done through the use of powerful pumps that expel coolant out of a nozzle directed at the cutter. The coolant used is a mixture of purified water from an RO system or distilled water, and a coolant additive that helps lubricate the water, making the cutters job easier and will help prevent rust in your machine. Dealing with these large quantities of liquid based coolant will necessitate a water-tight enclosure and coolant holding tanks under the mill. Over time coolants can stagnate causing health issues, so its important to remove the surface bacteria with a skimmer kit. Tormach offers one with the Tormach Skimmer Kit: https://tormach.com/oil-skimmer-kit-1100m-770m-39298.html To verify the quality of the coolant in your tanks, a refractometer can be used to check on the concentration of coolant, as water can be lost to evaporation. Flood coolant is a powerful option to forcefully remove the chips, but that force can cause a mess. If youd rather not deal with all that coolant, then an MQL system might be a great match. This system reduces the amount of coolant to the bare minimum, some even call it near-dry lubrication. The MQL nozzles spray a fine mist of coolant, combined with air to force the chips away from the cutter. Tormach Garage Series, Part 6 - How to Choose Coolant Interested in a Tormach machine? Schedule a call with one of our team members at https://hubs.ly/Q029gf-H0 and they will be happy to answer any questions you have. Be sure to subscribe for updates on everything Tormach: https://goo.gl/sWeCs7 Join the Tormach Forums here: https://hubs.ly/Q029ggRV0 There are several ways to contact Tormach Technical Support. If you want technical support, please follow these instructions to open a support ticket: https://hubs.ly/Q029ghcD0 Tormach Technical Support page: https://hubs.ly/Q029ghwW0 Tormach Technical Support contact: https://tormach.atlassian.net/servicedesk/customer/portals About Us: At Tormach, were dedicated to providing exceptionally engineered products, technical support, and customer service at the lowest possible cost. Our focus is to help you realize your CNC goals through tools and resources that transform your concepts into real products. Connect with us: Visit our website: https://hubs.ly/Q029gj8M0 Facebook: https://www.facebook.com/tormach Instagram: https://www.instagram.com/tormach Twitter: https://twitter.com/tormach LinkedIn: https://www.linkedin.com/company/tormach/$

Tormach ZA6 Robot Webinar, September 24 2021