Uploaded November 2020 | Updated November 2026, 3 hours ago
I'm going to surprise a friend with this Tinyhawk. They are about to venture into FPV and it needs to be EU LBT V2.1 compatible.
Tinyhawks: bit.ly/3frRDtp
FrSky XM: bit.ly/3nFpn9q
The XM is soldered to the SBUS pads and doesn't need any configuration changes (tested with 2 Taranis - original FCC D8 onboard works as it used to and the XM when connected to using a Taranis flashed with EU LBT V2.1 firmware)
Could be fun having 2 people trying to fly it together ha!
#Tinyhawk #LBT #V2.1
Thank you for watching, I'm always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appreciate it very much.
My Gear:
Runcam 5: bit.ly/2OlSnX8
Runcam 3: bit.ly/2sOuQOr
FrSky Taranis X-Lite : bit.ly/2DA8xlI
Aomway Commanders: bit.ly/2xClXuP
Data burst containing the usual information can be found on the outro.
I'm going to surprise a friend with this Tinyhawk. They are about to venture into FPV and it needs to be EU LBT V2.1 compatible.
Tinyhawks: bit.ly/3frRDtp
FrSky XM: bit.ly/3nFpn9q
The XM is soldered to the SBUS pads and doesn't need any configuration changes (tested with 2 Taranis - original FCC D8 onboard works as it used to and the XM when connected to using a Taranis flashed with EU LBT V2.1 firmware)
Could be fun having 2 people trying to fly it together ha!
#Tinyhawk #LBT #V2.1
Thank you for watching, I'm always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appreciate it very much.
My Gear:
Runcam 5: bit.ly/2OlSnX8
Runcam 3: bit.ly/2sOuQOr
FrSky Taranis X-Lite : bit.ly/2DA8xlI
Aomway Commanders: bit.ly/2xClXuP
Data burst containing the usual information can be found on the outro.
![MS116 Frame From Hatfield Flightcraft [ Armattan Productions ]
A nice conventional style frame from Allen Hatfield of Hatfield Flightcraft produced by Armattan Productions for this comming seasons evil 2 ripper.
MS116 Micro V4 Frame: http://bit.ly/2HK5C0B
I should have expected nothing less in the quality of the frame from Armattan - just sublime, while the design of the frame is right up my alley and should be bulletproof.
Required some pillars and a few m3 bolts:
4 X http://bit.ly/2BnmNj1 (15mm M3)
1 X http://bit.ly/2DO9ARX (20mm M3)
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
Data burst containing the usual information can be found on the outro. MS116 Frame From Hatfield Flightcraft [ Armattan Productions ]](https://i.ytimg.com/vi/NSpsHha0qxA/mqdefault.jpg)

![IGOW 3 Preseason 2 [ Split-S ]
IGOW 3 Preseason 2 [ Split-S ] IGOW 3 Preseason 2 [ Split-S ]](https://i.ytimg.com/vi/P9GtLMQPiKE/mqdefault.jpg)
![Runcam Split Sensor Board Swap [Mundane Maintenance]
Swapping out the CMOS sensor for the Split on my C240.
Runcam Split: http://bit.ly/2CZ8we4
It seems this was another attempt in vain to make good of the original Split.
Runcam was kind enough to send me a new CMOS Senson Board which has rectified the image position but the jello is still evident.
Im going to persist and try a couple more softer mountings, no doubt the ongoing saga is in the playlist or cards.
Thanks for watching, Im always happy to converse and answer questions so please leave a comment,I always aspire to answer each and every one!
If this helped you ,please rate the content,I appriciate it very much.
My Gear:
Runcam 3: http://bit.ly/2sOuQOr
FrSky Taranis Q X7: http://bit.ly/2kCtq8X
M7 Gimbals: http://bit.ly/2rowUg4
Aomway Commanders: http://bit.ly/2xClXuP
ImmersionRC Patch: http://bit.ly/2rTHbld
Here comes the usual boilerplate disclosures being all products are my own unless specifically stated that they were provided by a company for review or testing, some links may be affiliated and all opinions stated are my own and genuine ,good or bad.
I try and keep my content family friendly and exercise safety where applicable, you are responsible for your own actions following guides and instructions I may offer aswell as abiding by local laws etc, Youtube and Myself are absolved of any recourse and liability.
Have fun! Runcam Split Sensor Board Swap [Mundane Maintenance]](https://i.ytimg.com/vi/PA4ZQ3a0PdU/mqdefault.jpg)
![Metal Gear Upgrade for the MN90 2 Speed GearBox [ WPL / URUAV / MN90 / JJRC ]
A great quick upgrade for the MN D90 Ultimate, these metal gears in the 2 speed box again take the project way beyond toy grade to make it feel even better!
Gear set: http://bit.ly/2S91vg9
A little info on how they go in and work etc, if you need help drop a comment below & Ill help you as much as possible,
2 Speed Box: http://bit.ly/2XxHB04
MN-90 Kit: http://bit.ly/2Fo6tlp
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
Data burst containing the usual information can be found on the outro. Metal Gear Upgrade for the MN90 2 Speed GearBox [ WPL / URUAV / MN90 / JJRC ]](https://i.ytimg.com/vi/PC6cnuogZNk/mqdefault.jpg)
![Common Friends [ Some R&R ]
Thanks for a great outing, Crew!
[Music]
Track: Lost Sky - Where We Started (feat. Jex) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/U9pGr6KMdyg
Free Download / Stream: http://ncs.io/WhereWeStarted Common Friends [ Some R&R ]](https://i.ytimg.com/vi/QTXDaHQJeG4/mqdefault.jpg)
![RaceGOW 5 [ Track 4 ]
6 Packs as usual!
Got hold of a Nanoscout.. RaceGOW 5 [ Track 4 ]](https://i.ytimg.com/vi/Qe8IFbioIYc/mqdefault.jpg)
![IGOW 4 Week - 1 [ WeBLEED Orbits ] TEABLEED!
A trip to a local monument for the orbits - We got buzzed by a Puma that was below the tree line hooning around.
#igow4 #fpv #webleed
1st Baron Wantage:
https://en.wikipedia.org/wiki/Robert_Loyd-Lindsay,_1st_Baron_Wantage
The Ridgeway:
https://www.historic-uk.com/HistoryMagazine/DestinationsUK/The-Ridgeway/
A huge thanks to @Gemfanhobby for keeping us in the air!
[Music]
Track: Rxm リム - LOOK AT ME! [NCS Release]
Music provided by NoCopyrightSounds.
Watch: http://ncs.lnk.to/LOOKATMEAT/youtube
Free Download / Stream: http://ncs.io/LOOKATME IGOW 4 Week - 1 [ WeBLEED Orbits ] TEABLEED!](https://i.ytimg.com/vi/QpZruJoD0zI/mqdefault.jpg)
![RaceGOW Track 9 [ No Excuses - Just Regrets ]
#racegow #whoop #fpv RaceGOW Track 9 [ No Excuses - Just Regrets ]](https://i.ytimg.com/vi/QwSd29fQSII/mqdefault.jpg)
![TS100 [Awesome Opensource Soldering Iron]
Been using this for ages, holds its own against expensive soldering stations on all but the heaviest of wire gauges.
TS100: http://bit.ly/2QjnLEP (Discount Code: BGTS100)
Case: http://bit.ly/39yzlTQ
Thank you for watching, Im always happy to converse, answer questions & happy to take content suggestions for future videos if possible so please leave a comment, I always aspire to answer each and every one!
If this video helped you in any way, please rate the content - I appriciate it very much.
My Gear:
Runcam 5: http://bit.ly/2OlSnX8
Runcam 3: http://bit.ly/2sOuQOr
FrSky Taranis X-Lite : http://bit.ly/2DA8xlI
Aomway Commanders: http://bit.ly/2xClXuP
Data burst containing the usual information can be found on the outro. TS100 [Awesome Opensource Soldering Iron]](https://i.ytimg.com/vi/R0JxNKT7jnk/mqdefault.jpg)
![IGOW 4 Week - 7 [ HDZero Trippys ]
HDZero Trippy Spins - Got it done with a swing in the weather that was rather hot!
Not the best but should tick the boxes.
#igow4 #hdzero #fpv IGOW 4 Week - 7 [ HDZero Trippys ]](https://i.ytimg.com/vi/R7d7JGfPTJM/mqdefault.jpg)