Uploaded September 2022 | Updated September 2026, 2 weeks ago
Register and get $100 from NextPCB:
nextpcb.com/register?code=Htoeletric
PCB Assembly capabilities info:
nextpcb.com/pcb-assembly-services?code=Htoeletric
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐ ๐๐ฒ๐๐ฐ๐ฟ๐ถ๐ฝ๐๐ถ๐ผ๐ป:
In this post, we will make an ESP32 GPS Tracker using Quectel L86 GPS Module & OLED Display. The L86 GPS Module from Quectel is the tiny, low cost and low-power-consuming GPS Module available on the market. It has an integrated patch antenna and new generation MediaTek MT3333 GNSS chipset which has exceptional performance both in acquisition and tracking, and space-saving design.
It acquires and tracks satellites in the shortest time even at the indoor signal level. Compared to NEO-6M GPS Module and RYS8830 GPS/GNSS Receiver, this module has the best performance It is designed to be compatible with Quectelโs GPS L80 Module to provide a flexible and scalable platform for migrating from GPS to GNSS.
In this tutorial, we will interface Quectel L86 GPS Module with ESP32 and make our own GPS Tracker. The L86 GPS Module can give the value of Latitude, Longitude, Speed, Altitude, Date, and Time once it is synchronized with the satellite. We will display these parameters on a 0.96โณ OLED Screen. Then using the ESP32 WiFi chip we will send the GPS coordinates to ESP32 Webserver.
๐ช๐ฟ๐ถ๐๐๐ฒ๐ป๐ ๐ง๐๐๐ผ๐ฟ๐ถ๐ฎ๐น: how2electronics.com/esp32-gps-tracker-using-l86-gps-module-oled-display
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: how2electronics.com
Facebook: facebook.com/howtoelectronics
Instagram: instagram.com/howtoelectronics
Twitter: twitter.com/how2electronics
Register and get $100 from NextPCB:
nextpcb.com/register?code=Htoeletric
PCB Assembly capabilities info:
nextpcb.com/pcb-assembly-services?code=Htoeletric
๐ฃ๐ฟ๐ผ๐ท๐ฒ๐ฐ๐ ๐๐ฒ๐๐ฐ๐ฟ๐ถ๐ฝ๐๐ถ๐ผ๐ป:
In this post, we will make an ESP32 GPS Tracker using Quectel L86 GPS Module & OLED Display. The L86 GPS Module from Quectel is the tiny, low cost and low-power-consuming GPS Module available on the market. It has an integrated patch antenna and new generation MediaTek MT3333 GNSS chipset which has exceptional performance both in acquisition and tracking, and space-saving design.
It acquires and tracks satellites in the shortest time even at the indoor signal level. Compared to NEO-6M GPS Module and RYS8830 GPS/GNSS Receiver, this module has the best performance It is designed to be compatible with Quectelโs GPS L80 Module to provide a flexible and scalable platform for migrating from GPS to GNSS.
In this tutorial, we will interface Quectel L86 GPS Module with ESP32 and make our own GPS Tracker. The L86 GPS Module can give the value of Latitude, Longitude, Speed, Altitude, Date, and Time once it is synchronized with the satellite. We will display these parameters on a 0.96โณ OLED Screen. Then using the ESP32 WiFi chip we will send the GPS coordinates to ESP32 Webserver.
๐ช๐ฟ๐ถ๐๐๐ฒ๐ป๐ ๐ง๐๐๐ผ๐ฟ๐ถ๐ฎ๐น: how2electronics.com/esp32-gps-tracker-using-l86-gps-module-oled-display
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: how2electronics.com
Facebook: facebook.com/howtoelectronics
Instagram: instagram.com/howtoelectronics
Twitter: twitter.com/how2electronics
