Uploaded September 2025 | Updated November 2026, 1 day ago
Paige’s 1964 Chevy Chevelle has the WORST Power Disc Brakes I’ve ever driven—and it’s finally time to fix them so this car stops like it should, not like a runaway freight train!
In this video, we’re upgrading the braking system with a new master cylinder, brake booster, and proportioning valve. The Chevelle already had a power disc setup from the previous owner, complete with billet SSBC front calipers and drilled/slotted rotors. But despite all that, the car still had almost zero stopping power.
I already ruled out the basics—vacuum leaks, booster swap, proper bleeding, and even vacuum at idle (15 inHg is plenty). That left us with three likely culprits:
1) Bad master cylinder
2) Bad proportioning valve
Or…
3) the fancy billet SSBC calipers just aren’t up to the task (fingers crossed it’s not that).
After scoring a killer deal on a Summit Racing brake kit from the Summit Outlet in Arlington, we’re installing these upgraded parts to see if we can finally get Paige’s Chevelle stopping the way it should.
👉 Watch as we tear into the brake system, swap in the new parts, and find out if this upgrade is the solution to the Chevelle’s sketchy brakes!
Summit Brake Kit Used
Summit Racing Power Brake Conversion Kit - SUM-760222
summitracing.com/parts/sum-760222
#Chevelle #BrakeUpgrade #MuscleCar #CarRestoration #SummitRacing #DiscBrakes #ClassicCars
1964 Chevelle, Chevelle brakes, Chevelle brake upgrade, SSBC calipers, power disc brake conversion, Summit Racing brake kit, muscle car brakes, Chevelle restoration, classic car brake upgrade, master cylinder replacement, proportioning valve install, brake booster replacement, GM A-body brakes, muscle car restoration, classic car upgrades
Paige’s 1964 Chevy Chevelle has the WORST Power Disc Brakes I’ve ever driven—and it’s finally time to fix them so this car stops like it should, not like a runaway freight train!
In this video, we’re upgrading the braking system with a new master cylinder, brake booster, and proportioning valve. The Chevelle already had a power disc setup from the previous owner, complete with billet SSBC front calipers and drilled/slotted rotors. But despite all that, the car still had almost zero stopping power.
I already ruled out the basics—vacuum leaks, booster swap, proper bleeding, and even vacuum at idle (15 inHg is plenty). That left us with three likely culprits:
1) Bad master cylinder
2) Bad proportioning valve
Or…
3) the fancy billet SSBC calipers just aren’t up to the task (fingers crossed it’s not that).
After scoring a killer deal on a Summit Racing brake kit from the Summit Outlet in Arlington, we’re installing these upgraded parts to see if we can finally get Paige’s Chevelle stopping the way it should.
👉 Watch as we tear into the brake system, swap in the new parts, and find out if this upgrade is the solution to the Chevelle’s sketchy brakes!
Summit Brake Kit Used
Summit Racing Power Brake Conversion Kit - SUM-760222
summitracing.com/parts/sum-760222
#Chevelle #BrakeUpgrade #MuscleCar #CarRestoration #SummitRacing #DiscBrakes #ClassicCars
1964 Chevelle, Chevelle brakes, Chevelle brake upgrade, SSBC calipers, power disc brake conversion, Summit Racing brake kit, muscle car brakes, Chevelle restoration, classic car brake upgrade, master cylinder replacement, proportioning valve install, brake booster replacement, GM A-body brakes, muscle car restoration, classic car upgrades




![Risking a Wiped Cam to Wake Up This Scrapyard 454 Big Block
We risked wiping a cam to wake up Paiges 454 Big Block Chevelle just 5 WEEKS before Rocky Mountain Race Week 2.0!
The budget plan was simple: bolt on a set of ZZ502 GM Performance Oval Port Aluminum heads and stuff a Comp Cams XE274H hydraulic flat tappet cam (11-246-3) in this scrapyard pulled 454 BBC to spice it up for drag-and-drive. It blew up fast - after consulting Brand Racing Engines, there was no good way to get the valve spring installed height right on our ZZ502 heads for the flat tappet cam, the spring install height on the heads just wont work and no time to figure out other parts and were no where near well off enough to get custom order parts.
So we called an audible: out with the aluminum heads, in with a set of old-school 781 casting iron heads. Not as good on paper, but a massive upgrade over the awful peanut port heads on the motor, and they work with the parts we already had.
Tear down revealed this dirt-scrapyard 454 was actually loaded - 30 over Speed Pro pistons, double roller timing set, Melling M77HV oil pump, all looking brand new (total score of a $500 marketplace find). We cleaned everything up, loaded the XE274H with Comp DLC lifters and Clevite Cam Guard, packed the 781s with PAC Racing Springs, sealed them with Felpro 8180-PT2 head gaskets, and took it to BradFabs run stand for final assembly and break-in.
Then the longest 20 minutes in hot rodding: flat tappet break-in straight to 2000+ RPM, no red flags, cool down overnight, check the valvetrain, and fire it one more time to hear that new cam chop. Now its time to stuff Paiges refreshed big block back in her 64 Chevelle and get ready for Race Week. . . at least thats the plan!
Paiges 1964 Chevelle - 454 Big Block Chevy / 4L80E swap / drag-and-drive build playlist linked above.
#chevelle #chevy454 #bigblockchevy #enginerebuild #hotrod
CHAPTERS:
00:00 5 Weeks to Race Week - The Plan to Spice Up the 454
02:15 Why the ZZ502 Aluminum Heads FAILED With This Cam
04:30 The Audible: 781 Iron Heads vs Peanut Ports
06:45 Teardown Surprise - Scrapyard 454 Has Good Parts
09:10 Cam Install: XE274H + DLC Lifters + Cam Guard
11:30 Building the 781s + Felpro Head Gaskets
14:00 On BradFabs Run Stand - Assembly Complete
16:15 The Dreaded 20-Minute Flat Tappet Break-In
19:30 Next Morning Inspection - Did We Wipe A Lobe?
21:30 That New Cam Sound + Packing For Home
23:00 Next Up: Back In The Chevelle For RMRW 2.0
Affiliate links & shop staples I actually use:
[PUT YOUR TOP 2-3 LINKS HERE - per your rule, high-value links stay near the top]
Primeweld TIG225X TIG / YesWelder MIG205-DS Pro MIG - what we weld with in the shop
Super Clean - garage cleanup process [if applicable to this video]
Follow the Chevelle / Nova Wagon / Trailer builds - new long-form every week at 9:01am CT. Risking a Wiped Cam to Wake Up This Scrapyard 454 Big Block](https://i.ytimg.com/vi/AjUaismKxrY/mqdefault.jpg)





