Uploaded November 2025 | Updated November 2026, 5 hours ago
In this video, I tackle one of the most critical steps in building my 1963 Chevy II Gasser — figuring out how to set up the steering system from the column to the Vega steering box. I’m using a Speedway Motors nostalgia steering column, Double-D steering shaft, and a set of u-joints to connect everything cleanly and safely on this straight-axle Gasser setup.
☕ Want to help support the channel? You can do that here — it really helps us keep projects like this moving forward:
👉 buymeacoffee.com/onemorebolt
If you’re building a Gasser-style hot rod, classic Chevy II Nova, or just looking to understand how to properly mock up and align a custom steering system, this video walks through the exact process I used — from test fitting the steering column and bracket mount to determining the correct Double-D shaft length for perfect geometry and function.
Along the way, I’ll cover:
🔹 How to mount a Speedway nostalgia steering column in a Gasser build
🔹 How to measure and cut a Double-D steering shaft correctly
🔹 Tips for connecting the steering column to a Vega steering box
🔹 Common mistakes when aligning steering u-joints and angles
🔹 Why steering alignment is critical for safe straight-axle handling
This part of the Chevy II Gasser build series focuses on making the steering system reliable and true to old-school Gasser style. Whether you’re working on a Nova, Falcon, Willys, or any vintage drag-inspired hot rod, the principles are the same — proper mock-up, safe alignment, and functional design.
If you find this video helpful, give it a 👍, drop a comment, and subscribe for more budget-minded classic car fabrication and Gasser build content.
➡️ Support the channel: buymeacoffee.com/onemorebolt
Every little bit helps keep these projects rolling and the coffee pot full!
#ChevyII #GasserBuild #HotRodFabrication #SpeedwayMotors #VegaSteeringBox #ClassicCarRestoration #ChevyIINova #Gasser #StraightAxle #OneMoreBolt
In this video, I tackle one of the most critical steps in building my 1963 Chevy II Gasser — figuring out how to set up the steering system from the column to the Vega steering box. I’m using a Speedway Motors nostalgia steering column, Double-D steering shaft, and a set of u-joints to connect everything cleanly and safely on this straight-axle Gasser setup.
☕ Want to help support the channel? You can do that here — it really helps us keep projects like this moving forward:
👉 buymeacoffee.com/onemorebolt
If you’re building a Gasser-style hot rod, classic Chevy II Nova, or just looking to understand how to properly mock up and align a custom steering system, this video walks through the exact process I used — from test fitting the steering column and bracket mount to determining the correct Double-D shaft length for perfect geometry and function.
Along the way, I’ll cover:
🔹 How to mount a Speedway nostalgia steering column in a Gasser build
🔹 How to measure and cut a Double-D steering shaft correctly
🔹 Tips for connecting the steering column to a Vega steering box
🔹 Common mistakes when aligning steering u-joints and angles
🔹 Why steering alignment is critical for safe straight-axle handling
This part of the Chevy II Gasser build series focuses on making the steering system reliable and true to old-school Gasser style. Whether you’re working on a Nova, Falcon, Willys, or any vintage drag-inspired hot rod, the principles are the same — proper mock-up, safe alignment, and functional design.
If you find this video helpful, give it a 👍, drop a comment, and subscribe for more budget-minded classic car fabrication and Gasser build content.
➡️ Support the channel: buymeacoffee.com/onemorebolt
Every little bit helps keep these projects rolling and the coffee pot full!
#ChevyII #GasserBuild #HotRodFabrication #SpeedwayMotors #VegaSteeringBox #ClassicCarRestoration #ChevyIINova #Gasser #StraightAxle #OneMoreBolt

![Risking a Wiped Cam to Wake Up This Scrapyard 454 Big Block
We risked wiping a cam to wake up Paiges 454 Big Block Chevelle just 5 WEEKS before Rocky Mountain Race Week 2.0!
The budget plan was simple: bolt on a set of ZZ502 GM Performance Oval Port Aluminum heads and stuff a Comp Cams XE274H hydraulic flat tappet cam (11-246-3) in this scrapyard pulled 454 BBC to spice it up for drag-and-drive. It blew up fast - after consulting Brand Racing Engines, there was no good way to get the valve spring installed height right on our ZZ502 heads for the flat tappet cam, the spring install height on the heads just wont work and no time to figure out other parts and were no where near well off enough to get custom order parts.
So we called an audible: out with the aluminum heads, in with a set of old-school 781 casting iron heads. Not as good on paper, but a massive upgrade over the awful peanut port heads on the motor, and they work with the parts we already had.
Tear down revealed this dirt-scrapyard 454 was actually loaded - 30 over Speed Pro pistons, double roller timing set, Melling M77HV oil pump, all looking brand new (total score of a $500 marketplace find). We cleaned everything up, loaded the XE274H with Comp DLC lifters and Clevite Cam Guard, packed the 781s with PAC Racing Springs, sealed them with Felpro 8180-PT2 head gaskets, and took it to BradFabs run stand for final assembly and break-in.
Then the longest 20 minutes in hot rodding: flat tappet break-in straight to 2000+ RPM, no red flags, cool down overnight, check the valvetrain, and fire it one more time to hear that new cam chop. Now its time to stuff Paiges refreshed big block back in her 64 Chevelle and get ready for Race Week. . . at least thats the plan!
Paiges 1964 Chevelle - 454 Big Block Chevy / 4L80E swap / drag-and-drive build playlist linked above.
#chevelle #chevy454 #bigblockchevy #enginerebuild #hotrod
CHAPTERS:
00:00 5 Weeks to Race Week - The Plan to Spice Up the 454
02:15 Why the ZZ502 Aluminum Heads FAILED With This Cam
04:30 The Audible: 781 Iron Heads vs Peanut Ports
06:45 Teardown Surprise - Scrapyard 454 Has Good Parts
09:10 Cam Install: XE274H + DLC Lifters + Cam Guard
11:30 Building the 781s + Felpro Head Gaskets
14:00 On BradFabs Run Stand - Assembly Complete
16:15 The Dreaded 20-Minute Flat Tappet Break-In
19:30 Next Morning Inspection - Did We Wipe A Lobe?
21:30 That New Cam Sound + Packing For Home
23:00 Next Up: Back In The Chevelle For RMRW 2.0
Affiliate links & shop staples I actually use:
[PUT YOUR TOP 2-3 LINKS HERE - per your rule, high-value links stay near the top]
Primeweld TIG225X TIG / YesWelder MIG205-DS Pro MIG - what we weld with in the shop
Super Clean - garage cleanup process [if applicable to this video]
Follow the Chevelle / Nova Wagon / Trailer builds - new long-form every week at 9:01am CT. Risking a Wiped Cam to Wake Up This Scrapyard 454 Big Block](https://i.ytimg.com/vi/AjUaismKxrY/mqdefault.jpg)








