Uploaded November 2021 | Updated September 2026, 1 hour ago

---

This video outlines how to connect an FFS2001 Series Workstation to the external power supply, vacuum pump, argon cylinder, and the computer running the FFS3 software used to control the unit. While the video uses a legacy FFS2000 Series Workstation, all features, functions, and terminology are identical for the FFS2001 Series. Powering up and powering down the workstation are also covered. If you are unfamiliar with how to prepare an Argon gas line for your unit, please watch this tutorial: youtu.be/zWaNZUIcFb8

To build a complete workstation, a base unit needs to be bought plus additional components (e.g. inserts, graphite inserts, and recoat mold assembly) that depend upon the size of the fiber being processed. It is recommended that you contact us prior to ordering so we can provide assistance with selecting the system and components that best suit your needs.

For more information on FFS2001 Workstations for splicing SM and MM fiber with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9488

For more information on FFS2001 Workstations for splicing SM, MM and PM fibers with no proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9512

For more information on FFS2001 Workstations for splicing SM and MM fiber with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9510

For more information on FFS2001 Workstations for splicing SM, MM and PM fibers with proof tester, please visit: thorlabs.com/newgrouppage9.cfm?objectgroup_id=9322

0:00 Title
0:24 Setup, Power Up, and Power Down
0:47 Communications Cables
1:28 Other Connections on the Rear
2:03 External Connections
3:07 Power Up
4:27 Power Down